@@ -165,10 +165,6 @@
#ifndef __ASSEMBLY__
/* Other enums */
-enum OpalVendorApiTokens {
- OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999
-};
-
enum OpalFreezeState {
OPAL_EEH_STOPPED_NOT_FROZEN = 0,
OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
@@ -236,27 +232,12 @@ enum OpalErrinjectFunc {
OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET = 19,
};
-enum OpalShpcAction {
- OPAL_SHPC_GET_LINK_STATE = 0,
- OPAL_SHPC_GET_SLOT_STATE = 1
-};
-
-enum OpalShpcLinkState {
- OPAL_SHPC_LINK_DOWN = 0,
- OPAL_SHPC_LINK_UP = 1
-};
-
enum OpalMmioWindowType {
OPAL_M32_WINDOW_TYPE = 1,
OPAL_M64_WINDOW_TYPE = 2,
OPAL_IO_WINDOW_TYPE = 3
};
-enum OpalShpcSlotState {
- OPAL_SHPC_DEV_NOT_PRESENT = 0,
- OPAL_SHPC_DEV_PRESENT = 1
-};
-
enum OpalExceptionHandler {
OPAL_MACHINE_CHECK_HANDLER = 1,
OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
@@ -348,29 +329,6 @@ enum OpalPciResetState {
OPAL_ASSERT_RESET = 1
};
-enum OpalPciMaskAction {
- OPAL_UNMASK_ERROR_TYPE = 0,
- OPAL_MASK_ERROR_TYPE = 1
-};
-
-enum OpalSlotLedType {
- OPAL_SLOT_LED_ID_TYPE = 0,
- OPAL_SLOT_LED_FAULT_TYPE = 1
-};
-
-enum OpalLedAction {
- OPAL_TURN_OFF_LED = 0,
- OPAL_TURN_ON_LED = 1,
- OPAL_QUERY_LED_STATE_AFTER_BUSY = 2
-};
-
-enum OpalEpowStatus {
- OPAL_EPOW_NONE = 0,
- OPAL_EPOW_UPS = 1,
- OPAL_EPOW_OVER_AMBIENT_TEMP = 2,
- OPAL_EPOW_OVER_INTERNAL_TEMP = 3
-};
-
/*
* Address cycle types for LPC accesses. These also correspond
* to the content of the first cell of the "reg" property for
@@ -440,11 +398,6 @@ enum OpalMemErr_DynErrType {
OPAL_MEM_DYNAMIC_DEALLOC = 0,
};
-/* OpalMemoryErrorData->flags */
-#define OPAL_MEM_CORRECTED_ERROR 0x0001
-#define OPAL_MEM_THRESHOLD_EXCEEDED 0x0002
-#define OPAL_MEM_ACK_REQUIRED 0x8000
-
struct OpalMemoryErrorData {
enum OpalMemErr_Version version:8; /* 0x00 */
enum OpalMemErrType type:8; /* 0x01 */
This removes definitions in opal-api.h that are completely unused in Linux. For each of these I see three possibilities, 1) we *should* be using them in Linux and patches will arrive to do that, 2) they are not used but should stay in the header to document the API for some important reason, 3) they are not used and needn't be part of the API. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> --- arch/powerpc/include/asm/opal-api.h | 47 ------------------------------------- 1 file changed, 47 deletions(-)