diff mbox

[08/29] powerpc/85xx: Rework MPC8536DS device trees

Message ID 1321514181-28897-8-git-send-email-galak@kernel.crashing.org (mailing list archive)
State Accepted, archived
Commit 2e8685a491c1063a4126598b10ecb78d1d20f537
Delegated to: Kumar Gala
Headers show

Commit Message

Kumar Gala Nov. 17, 2011, 7:16 a.m. UTC 
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:
* Moved to specifying interrupt-parent for mpic at root
* Moved to 4-cell mpic interrupt cells to support MPIC timers
* Added localbus node, but no chipselect details at this point
* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
* and moved
  PCI device IRQs down to virtual bridge level
* Moved mdio nodes up one level instead of under tsec nodes
* Added GPIO controller node to MPC8536 SoC template
  [ marked as MPC8572 compatiable to get errata handling that applies ]
* Added missing cache-line-size & cache-size properties missing from
  L2-cache node
* Added IP level IEEE 1588 / ptp timer node

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi |  248 ++++++++++++++
 arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi  |   63 ++++
 arch/powerpc/boot/dts/mpc8536ds.dts           |  456 +------------------------
 arch/powerpc/boot/dts/mpc8536ds.dtsi          |  141 ++++++++
 arch/powerpc/boot/dts/mpc8536ds_36b.dts       |  410 ++---------------------
 5 files changed, 489 insertions(+), 829 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
 create mode 100644 arch/powerpc/boot/dts/mpc8536ds.dtsi

Comments

Scott Wood Nov. 17, 2011, 8:44 p.m. UTC | #1 
On Thu, Nov 17, 2011 at 01:16:00AM -0600, Kumar Gala wrote:
> Utilize new split between board & SoC, and new SoC device trees split
> into pre & post utilizing 'template' includes for SoC IP blocks.
> 
> Other changes include:
> * Moved to specifying interrupt-parent for mpic at root
> * Moved to 4-cell mpic interrupt cells to support MPIC timers
> * Added localbus node, but no chipselect details at this point
> * Reworked PCIe nodes to allow supportin IRQs for controller (errors)
> * and moved
>   PCI device IRQs down to virtual bridge level
> * Moved mdio nodes up one level instead of under tsec nodes
> * Added GPIO controller node to MPC8536 SoC template
>   [ marked as MPC8572 compatiable to get errata handling that applies ]
> * Added missing cache-line-size & cache-size properties missing from
>   L2-cache node
> * Added IP level IEEE 1588 / ptp timer node
> 
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
>  arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi |  248 ++++++++++++++
>  arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi  |   63 ++++

OK, so rather than ask again what the real reason for this is, I went
ahead and tried it without the pre/post split.

It seems the issue with putting everything in "pre" is that we can't
rewrite a node name.  We can let the board supply its own reg/ranges, but
not the unit address of a previously-defined node.

Putting everything in post works, provided the setting of board-level
compatible is removed from the "si" file.  And since the board file is
driving this process, if it really wanted to override something from the
"si" file, it could do so after the include (just as it would currently
need to do to override anything in "post").

-Scott
diff mbox

Patch

diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
new file mode 100644
index 0000000..89af626
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,248 @@ 
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci3 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <27 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <27 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8536-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8536-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	/* mark compat w/8572 to get some erratum treatment */
+	gpio-controller@f000 {
+		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+	};
+
+	sata@18000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x18000 0x1000>;
+		cell-index = <1>;
+		interrupts = <74 0x2 0 0>;
+	};
+
+	sata@19000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x19000 0x1000>;
+		cell-index = <2>;
+		interrupts = <41 0x2 0 0>;
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8536-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	usb@22000 {
+		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x22000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <28 0x2 0 0>;
+	};
+
+	usb@23000 {
+		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x23000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <46 0x2 0 0>;
+	};
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+	};
+
+/include/ "pq3-etsec1-2.dtsi"
+
+	ethernet@26000 {
+		cell-index = <1>;
+	};
+
+	usb@2b000 {
+		compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+		reg = <0x2b000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <60 0x2 0 0>;
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8536-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 0000000..7de45a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,63 @@ 
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,MPC8536";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index a75c10e..c158815 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -9,24 +9,11 @@ 
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
 	compatible = "fsl,mpc8536ds";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-	};
 
 	cpus {
 		#cpus = <1>;
@@ -45,403 +32,34 @@ 
 		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8536-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8536-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0 0x1>;
-				interrupt-parent = <&mpic>;
-			};
-		};
-
-		spi@7000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc8536-espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			fsl,espi-num-chipselects = <4>;
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>;
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-			flash@1 {
-				compatible = "spansion,s25sl12801";
-				reg = <1>;
-				spi-max-frequency = <40000000>;
-			};
-			flash@2 {
-				compatible = "spansion,s25sl12801";
-				reg = <2>;
-				spi-max-frequency = <40000000>;
-			};
-			flash@3 {
-				compatible = "spansion,s25sl12801";
-				reg = <3>;
-				spi-max-frequency = <40000000>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
-			reg = <0x21300 4>;
-			ranges = <0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		usb@22000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
-		};
-
-		usb@23000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <0>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <1>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		usb@2b000 {
-			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
-			reg = <0x2b000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <60 0x2>;
-			dr_mode = "peripheral";
-			phy_type = "ulpi";
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			clock-frequency = <250000000>;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			cell-index = <1>;
-			interrupts = <74 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			cell-index = <2>;
-			interrupts = <41 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			big-endian;
-		};
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+	};
 
-		msi@41600 {
-			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
 	};
 
 	pci0: pci@ffe08000 {
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0 0 1 &mpic 1 1
-			0x8800 0 0 2 &mpic 2 1
-			0x8800 0 0 3 &mpic 3 1
-			0x8800 0 0 4 &mpic 4 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 0x2>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
-			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe08000 0 0x1000>;
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
 	};
 
 	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
 			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0x98000000
 				  0x02000000 0 0x98000000
 				  0 0x08000000
@@ -453,31 +71,10 @@ 
 	};
 
 	pci2: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
 			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0x90000000
 				  0x02000000 0 0x90000000
 				  0 0x08000000
@@ -489,32 +86,10 @@ 
 	};
 
 	pci3: pcie@ffe0b000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0 0xffe0b000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
 			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <27 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 8 1
-			0000 0 0 2 &mpic 9 1
-			0000 0 0 3 &mpic 10 1
-			0000 0 0 4 &mpic 11 1
-			>;
-
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xa0000000
 				  0x02000000 0 0xa0000000
 				  0 0x20000000
@@ -525,3 +100,6 @@ 
 		};
 	};
 };
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
new file mode 100644
index 0000000..1462e4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -0,0 +1,141 @@ 
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+	i2c@3100 {
+		rtc@68 {
+			compatible = "dallas,ds3232";
+			reg = <0x68>;
+			interrupts = <0 0x1 0 0>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			partition@u-boot {
+				label = "u-boot";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@kernel {
+				label = "kernel";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@dtb {
+				label = "dtb";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@fs {
+				label = "file system";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+		flash@1 {
+			compatible = "spansion,s25sl12801";
+			reg = <1>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@2 {
+			compatible = "spansion,s25sl12801";
+			reg = <2>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@3 {
+			compatible = "spansion,s25sl12801";
+			reg = <3>;
+			spi-max-frequency = <40000000>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 0x1 0 0>;
+			reg = <0>;
+			device_type = "ethernet-phy";
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 0x1 0 0>;
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@26520 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,gianfar-tbi";
+		reg = <0x26520 0x20>;
+
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	usb@2b000 {
+		dr_mode = "peripheral";
+		phy_type = "ulpi";
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index d95b260..8f4b929 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -1,5 +1,5 @@ 
 /*
- * MPC8536 DS Device Tree Source
+ * MPC8536DS Device Tree Source (36-bit address map)
  *
  * Copyright 2008-2009 Freescale Semiconductor, Inc.
  *
@@ -9,24 +9,11 @@ 
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
 	compatible = "fsl,mpc8536ds";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-	};
 
 	cpus {
 		#cpus = <1>;
@@ -45,351 +32,34 @@ 
 		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	soc@fffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8536-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8536-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0 0x1>;
-				interrupt-parent = <&mpic>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
-			reg = <0x21300 4>;
-			ranges = <0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8536-dma-channel",
-					     "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		usb@22000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
-		};
-
-		usb@23000 {
-			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <0>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 0x1>;
-					reg = <1>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		usb@2b000 {
-			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
-			reg = <0x2b000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&mpic>;
-			interrupts = <60 0x2>;
-			dr_mode = "peripheral";
-			phy_type = "ulpi";
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			clock-frequency = <250000000>;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			cell-index = <1>;
-			interrupts = <74 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			cell-index = <2>;
-			interrupts = <41 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			big-endian;
-		};
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+	};
 
-		msi@41600 {
-			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
 	};
 
-	pci0: pci@fffe08000 {
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
+	pci0: pci@ffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0 0 1 &mpic 1 1
-			0x8800 0 0 2 &mpic 2 1
-			0x8800 0 0 3 &mpic 3 1
-			0x8800 0 0 4 &mpic 4 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 0x2>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xf 0xffe08000 0 0x1000>;
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
 	};
 
-	pci1: pcie@fffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
+	pci1: pcie@ffe09000 {
 		reg = <0xf 0xffe09000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
 			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xf8000000
 				  0x02000000 0 0xf8000000
 				  0 0x08000000
@@ -401,31 +71,10 @@ 
 	};
 
 	pci2: pcie@fffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe0a000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
 			  0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
-			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xf8000000
 				  0x02000000 0 0xf8000000
 				  0 0x08000000
@@ -437,32 +86,10 @@ 
 	};
 
 	pci3: pcie@fffe0b000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf 0xffe0b000 0 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <27 0x2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 8 1
-			0000 0 0 2 &mpic 9 1
-			0000 0 0 3 &mpic 10 1
-			0000 0 0 4 &mpic 11 1
-			>;
-
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x20000000
@@ -473,3 +100,6 @@ 
 		};
 	};
 };
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"