@@ -624,32 +624,20 @@ static int sti_pwm_probe(struct platform_device *pdev)
return ret;
if (cdata->pwm_num_devs) {
- pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+ pc->pwm_clk = devm_clk_get_prepared(dev, "pwm");
if (IS_ERR(pc->pwm_clk)) {
dev_err(dev, "failed to get PWM clock\n");
return PTR_ERR(pc->pwm_clk);
}
-
- ret = clk_prepare(pc->pwm_clk);
- if (ret) {
- dev_err(dev, "failed to prepare clock\n");
- return ret;
- }
}
if (cdata->cpt_num_devs) {
- pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
+ pc->cpt_clk = devm_clk_get_prepared(dev, "capture");
if (IS_ERR(pc->cpt_clk)) {
dev_err(dev, "failed to get PWM capture clock\n");
return PTR_ERR(pc->cpt_clk);
}
- ret = clk_prepare(pc->cpt_clk);
- if (ret) {
- dev_err(dev, "failed to prepare clock\n");
- return ret;
- }
-
cdata->ddata = devm_kzalloc(dev, cdata->cpt_num_devs * sizeof(*cdata->ddata), GFP_KERNEL);
if (!cdata->ddata)
return -ENOMEM;
@@ -664,27 +652,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
mutex_init(&ddata->lock);
}
- ret = pwmchip_add(chip);
- if (ret < 0) {
- clk_unprepare(pc->pwm_clk);
- clk_unprepare(pc->cpt_clk);
- return ret;
- }
-
- platform_set_drvdata(pdev, chip);
-
- return 0;
-}
-
-static void sti_pwm_remove(struct platform_device *pdev)
-{
- struct pwm_chip *chip = platform_get_drvdata(pdev);
- struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
-
- pwmchip_remove(chip);
-
- clk_unprepare(pc->pwm_clk);
- clk_unprepare(pc->cpt_clk);
+ return devm_pwmchip_add(dev, chip);
}
static const struct of_device_id sti_pwm_of_match[] = {
@@ -699,7 +667,6 @@ static struct platform_driver sti_pwm_driver = {
.of_match_table = sti_pwm_of_match,
},
.probe = sti_pwm_probe,
- .remove_new = sti_pwm_remove,
};
module_platform_driver(sti_pwm_driver);
Instead of of_clk_get_by_name() use devm_clk_get_prepared() which has several advantages: - Combines getting the clock and a call to clk_prepare(). The latter can be dropped from sti_pwm_probe() accordingly. - Cares for calling clk_put() which is missing in both probe's error path and the remove function. - Cares for calling clk_unprepare() which can be dropped from the error paths and the remove function. (Note that not all error path got this right.) With additionally using devm_pwmchip_add() instead of pwmchip_add() the remove callback can be dropped completely. With it the last user of platform_get_drvdata() goes away and so platform_set_drvdata() can be dropped from the probe function, too. Fixes: 378fe115d19d ("pwm: sti: Add new driver for ST's PWM IP") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- drivers/pwm/pwm-sti.c | 39 +++------------------------------------ 1 file changed, 3 insertions(+), 36 deletions(-)