@@ -107,6 +107,29 @@ config SOC_AT91SAM9
AT91SAM9X35
AT91SAM9XE
+comment "Clocksource driver selection"
+
+config ATMEL_CLOCKSOURCE_PIT
+ bool "Periodic Interval Timer (PIT) support"
+ depends on SOC_AT91SAM9 || SOC_SAMA5
+ default SOC_AT91SAM9 || SOC_SAMA5
+ select ATMEL_PIT
+ help
+ Select this to get a clocksource based on the Atmel Periodic Interval
+ Timer. It has a relatively low resolution and the TC Block clocksource
+ should be preferred.
+
+config ATMEL_CLOCKSOURCE_TCB
+ bool "Timer Counter Blocks (TCB) support"
+ default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5
+ select ATMEL_TCB_CLKSRC
+ help
+ Select this to get a high precision clocksource based on a
+ TC block with a 5+ MHz base clock rate.
+ On platforms with 16-bit counters, two timer channels are combined
+ to make a single 32-bit timer.
+ It can also be used as a clock event device supporting oneshot mode.
+
config HAVE_AT91_UTMI
bool
Allow selecting and unselecting the PIT clocksource driver so it doesn't have to be compiled when unused. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/arm/mach-at91/Kconfig | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)