| Message ID | 1481027929-13704-2-git-send-email-benjamin.gaignard@st.com |
|---|---|
| State | Superseded |
| Headers | show |
On Tue, 06 Dec 2016, Benjamin Gaignard wrote: > Add bindings information for STM32 General Purpose Timer > > version 2: > - rename stm32-mfd-timer to stm32-gptimer > - only keep one compatible string > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> > --- > .../bindings/mfd/stm32-general-purpose-timer.txt | 39 ++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt > > diff --git a/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt > new file mode 100644 > index 0000000..e92c8be > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt > @@ -0,0 +1,39 @@ > +STM32 General Purpose Timer driver bindings > + > +Required parameters: > +- compatible: must be "st,stm32-gptimer" > + > +- reg: Physical base address and length of the controller's > + registers. > +- clock-names: Set to "clk_int". > +- clocks: Phandle to the clock used by the timer module. > + For Clk properties, please refer to ../clock/clock-bindings.txt > + > +Optional parameters: > +- resets: Phandle to the parent reset controller. > + See ../reset/st,stm32-rcc.txt > + > +Optional subnodes: > +- pwm: See ../pwm/pwm-stm32.txt > +- timer: See ../iio/timer/stm32-timer-trigger.txt > + > +Example: > + gptimer@40010000 { I'm not going to push too hard, but I still thing "advanced-control" would suit better, since this is not *just* a timer. In fact, the parent device (the MFD) doesn't have any timer functionality. That's what "timer@0" does. The IP is called "Advanced Control" in the datasheet, no? > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "st,stm32-gptimer"; > + reg = <0x40010000 0x400>; > + clocks = <&rcc 0 160>; > + clock-names = "clk_int"; > + > + pwm@0 { > + compatible = "st,stm32-pwm"; > + pinctrl-0 = <&pwm1_pins>; > + pinctrl-names = "default"; > + }; > + > + timer@0 { > + compatible = "st,stm32-timer-trigger"; > + reg = <0>; > + }; > + };
[snip] > > I'm not going to push too hard, but I still thing "advanced-control" > would suit better, since this is not *just* a timer. In fact, the > parent device (the MFD) doesn't have any timer functionality. That's > what "timer@0" does. > > The IP is called "Advanced Control" in the datasheet, no? In datasheet only timers 1 and 8 are called "advanced-control" timers Timers 2 to 5 and 9 to 14 are called "general purpose" timers. Timers 6 and 7 are named "basic" timers. I have ask around in ST and it seems that "general purpose" name was the best to describe all the timers, so I would like to keep using it. > >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "st,stm32-gptimer"; >> + reg = <0x40010000 0x400>; >> + clocks = <&rcc 0 160>; >> + clock-names = "clk_int"; >> + >> + pwm@0 { >> + compatible = "st,stm32-pwm"; >> + pinctrl-0 = <&pwm1_pins>; >> + pinctrl-names = "default"; >> + }; >> + >> + timer@0 { >> + compatible = "st,stm32-timer-trigger"; >> + reg = <0>; >> + }; >> + }; > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead > Linaro.org │ Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-pwm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt new file mode 100644 index 0000000..e92c8be --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt @@ -0,0 +1,39 @@ +STM32 General Purpose Timer driver bindings + +Required parameters: +- compatible: must be "st,stm32-gptimer" + +- reg: Physical base address and length of the controller's + registers. +- clock-names: Set to "clk_int". +- clocks: Phandle to the clock used by the timer module. + For Clk properties, please refer to ../clock/clock-bindings.txt + +Optional parameters: +- resets: Phandle to the parent reset controller. + See ../reset/st,stm32-rcc.txt + +Optional subnodes: +- pwm: See ../pwm/pwm-stm32.txt +- timer: See ../iio/timer/stm32-timer-trigger.txt + +Example: + gptimer@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-gptimer"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 160>; + clock-names = "clk_int"; + + pwm@0 { + compatible = "st,stm32-pwm"; + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + }; + };
Add bindings information for STM32 General Purpose Timer version 2: - rename stm32-mfd-timer to stm32-gptimer - only keep one compatible string Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- .../bindings/mfd/stm32-general-purpose-timer.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt