| [V3] mtd: m25p80: Make fast read configurable via DT |
2012-07-23 |
Marek Vasut |
|
New |
| [RESEND] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver |
2012-07-31 |
Brian Norris |
|
New |
| [5/5] arm: sam9_l9260_defconfig: remove non-existing config option |
2012-07-30 |
Artem Bityutskiy |
|
New |
| [1/6] bcma: export PLL reading function |
2012-09-27 |
Rafał Miłecki |
|
New |
| [V2] mtd: m25p80: Make fast read configurable via DT |
2012-07-23 |
Marek Vasut |
|
New |
| [9/9] mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID |
2012-09-25 |
Brian Norris |
|
New |
| [09/10] mtd: remove the dilnetpc map driver support |
2013-03-13 |
Artem Bityutskiy |
|
New |
| [8/9] mtd: nand: decode Hynix MLC, 6-byte ID length |
2012-09-25 |
Brian Norris |
|
New |
| [02/10] mtd: remove the dmv182 map driver |
2013-03-13 |
Artem Bityutskiy |
|
New |
| [6/9] mtd: nand: add generic READ ID length calculation functions |
2012-09-25 |
Brian Norris |
|
New |
| [RFC,-next] linux/linkage.h: fix symbol prefix handling |
2013-03-14 |
Rusty Russell |
|
New |
| [5/9] mtd: nand: split simple ID decode into its own function |
2012-09-25 |
Brian Norris |
|
New |
| mtd: onenand: remove OneNAND simulator |
2013-03-14 |
Artem Bityutskiy |
|
New |
| [7/9] mtd: nand: increase max OOB size to 640 |
2012-09-25 |
Brian Norris |
|
New |
| mtd: remove ixp2000 driver |
2013-03-13 |
Paul Bolle |
|
New |
| drivers/mtd/devices/spear_smi.c: use devm_ functions consistently |
2012-08-04 |
Julia Lawall |
|
New |
| [1/4] mtd: merge mtdchar module with mtdcore |
2013-03-14 |
Artem Bityutskiy |
|
New |
| [4/9] mtd: nand: split extended ID decoding into its own function |
2012-09-25 |
Brian Norris |
|
New |
| [GIT,PULL] UBIFS changes for 3.7-rc6 |
2012-11-15 |
Artem Bityutskiy |
|
New |
| [3/9] mtd: nand: split BB marker options decoding into its own function |
2012-09-25 |
Brian Norris |
|
New |
| [10/10] mtd: remove the ixp2000 map driver |
2013-03-13 |
Artem Bityutskiy |
|
New |
| [1/9] mtd: nand: remove unnecessary variable |
2012-09-25 |
Brian Norris |
|
New |
| [2/9] mtd: nand: remove redundant ID read |
2012-09-25 |
Brian Norris |
|
New |
| [08/10] mtd: remove the tqm8xxl map driver |
2013-03-13 |
Artem Bityutskiy |
|
New |
| [6/6] bcm47xxnflash: enable BCM4706 driver |
2012-09-27 |
Rafał Miłecki |
|
New |
| [01/10] mtd: remove the dbox2-flash map driver |
2013-03-13 |
Artem Bityutskiy |
|
New |
| [1/3] mtd nand : onfi need to be probed in 8 bits mode |
2012-11-06 |
Matthieu CASTET |
|
New |
| [3/4] arm: mach-pxa: amend Kconfig after mtdchar merge |
2013-03-14 |
Artem Bityutskiy |
|
New |
| mtd nand : print flash size during detection |
2012-11-06 |
Matthieu CASTET |
|
New |
| [5/9] ubifs: use random32_get_bytes |
2012-10-28 |
Akinobu Mita |
|
New |
| [3/3] omap3 nand : use NAND_BUSWIDTH_AUTO |
2012-11-06 |
Matthieu CASTET |
|
New |
| [4/9] mtd: nandsim: use random32_get_bytes |
2012-10-28 |
Akinobu Mita |
|
New |
| [3/3] omap nand : use onfi mode to compute optimized timings |
2012-11-06 |
Matthieu CASTET |
|
New |
| [8/9] mtd: mtd_speedtest: use random32_get_bytes |
2012-10-28 |
Akinobu Mita |
|
New |
| [3/9] mtd: mtd_nandecctest: use random32_get_bytes instead of get_random_bytes() |
2012-10-28 |
Akinobu Mita |
|
New |
| UBI:Force ubi driver load after mtd device drivers |
2012-08-08 |
Jiang Lu |
|
New |
| ubifs: remove __DATE__ and __TIME__ |
2012-08-09 |
Jiri Slaby |
|
New |
| Per-partition NAND ECC? |
2012-09-24 |
Andreas Bießmann |
|
New |
| Kernel crashes when CONFIG_MTD_NAND_VERIFY_WRITE=y |
2012-08-10 |
Fabio Estevam |
|
New |
| [2/3] mtd nand : get timings from onfi |
2012-11-06 |
Matthieu CASTET |
|
New |
| mtd: gpmi: add NAND write verify support |
2012-08-10 |
Huang Shijie |
|
New |
| [2/6] mtd: prepare place for BCMA NAND flash driver(s) |
2012-09-27 |
Rafał Miłecki |
|
New |
| [14/14] MTD: atmel_nand: add pinctrl consumer support |
2012-08-10 |
Jean-Christophe PLAGNIOL-VILLARD |
|
New |
| [5/6] mtd: bcm47xxnflash: implement reading |
2012-09-27 |
Rafał Miłecki |
|
New |
| mtd: gpmi: add NAND write verify support |
2012-08-10 |
Fabio Estevam |
|
New |
| plat-nand DT support |
2013-03-03 |
Alexander Clouter |
|
New |
| mtd: gpmi-nand: Fix kernel crash due to missing verify_buf |
2012-08-10 |
Fabio Estevam |
|
New |
| [v2] mtd: gpmi: add NAND write verify support |
2012-08-11 |
Huang Shijie |
|
New |
| [v3] mtd: gpmi: add NAND write verify support |
2012-08-11 |
Huang Shijie |
|
New |
| mtd: maps: pci: remove dead code |
2012-08-11 |
Wolfram Sang |
|
New |
| [v4] mtd: gpmi: add NAND write verify support |
2012-08-12 |
Huang Shijie |
|
New |
| [6/6] mtd: remove h720x flash support |
2013-03-14 |
Arnd Bergmann |
|
New |
| mtd: nand: Added a device flag for subpage read support |
2012-08-13 |
Jeff Westfahl |
|
New |
| [v2] davinci_nand: fix modular build with CONFIG_OF=y |
2013-01-03 |
Sergei Shtylyov |
|
New |
| [1/1] drivers/mtd/devices/m25p80.c: Fix whole device erase |
2012-09-21 |
Cédric Cano |
|
New |
| mtd: fsmc_nand: fix error return code in fsmc_nand_probe() |
2013-05-13 |
Wei Yongjun |
|
New |
| mtd: nand: subpage write support for hardware based ECC schemes |
2013-03-15 |
pekon gupta |
|
New |
| mtd: m25p80: add support for Micron N25Q256A |
2012-08-14 |
Vivien Didelot |
|
New |
| mtd: kill MTD_NAND_VERIFY_WRITE |
2012-08-15 |
Huang Shijie |
|
New |
| kconfig: remove CONFIG_MTD_NAND_VERIFY_WRITE |
2012-08-15 |
Huang Shijie |
|
New |
| [1/2] mtd: remove the ppchameleonevb NAND driver |
2013-03-15 |
Artem Bityutskiy |
|
New |
| [03/10] UBI: Export next_sqnum() |
2012-09-24 |
Richard Weinberger |
|
New |
| [v2] mxc_nand : allow swapping the Bad block Indicator for NFC v1. |
2012-08-15 |
Gaëtan Carlier |
|
New |
| [2/2] mtd: remove the h1910 NAND driver |
2013-03-15 |
Artem Bityutskiy |
|
New |
| [3/4] UBI: use the whole MTD device size to get bad_peb_limit |
2012-08-15 |
Artem Bityutskiy |
|
New |
| mtd: nand: fsmc: update of OF support |
2013-04-29 |
Linus Walleij |
|
New |
| [RESEND,1/2] MTD: autcpu12-nvram: Fix compile breakage |
2012-08-15 |
Alexander Shiyan |
|
New |
| [RESEND,2/2] MTD: autcpu12-nvram: Convert driver to platform_device |
2012-08-15 |
Alexander Shiyan |
|
New |
| nand: gpmi-nand: Fix clock registration |
2012-10-08 |
Fabio Estevam |
|
New |
| nand: gpmi-nand: Fix clock registration |
2012-10-08 |
Fabio Estevam |
|
New |
| [04/10] UBI: Add self_check_eba() |
2012-09-24 |
Richard Weinberger |
|
New |
| [6/6] mtd: remove h720x flash support |
2013-03-14 |
Arnd Bergmann |
|
New |
| [v2,02/14] mtd: onenand: omap: cleanup gpmc dependency |
2012-10-08 |
Mohammed Afzal |
|
New |
| [v2,01/14] ARM: OMAP2+: gpmc: annotate exit sections properly |
2012-10-08 |
Mohammed Afzal |
|
New |
| dma: amba-pl08x: Export pl08x_filter_id |
2012-08-16 |
stigge@antcom.de |
|
New |
| [v2,03/14] mtd: nand: omap: free region as per resource size |
2012-10-08 |
Mohammed Afzal |
|
New |
| [1/2] UBI: use the whole MTD device size to get bad_peb_limit |
2012-08-16 |
Artem Bityutskiy |
|
New |
| [2/2] arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit |
2012-08-16 |
Artem Bityutskiy |
|
New |
| [v2,04/14] mtd: nand: omap: read nand using register address |
2012-10-08 |
Mohammed Afzal |
|
New |
| [RFC,v2,2/2] mtd: davinci - remove DaVinci architecture depedency |
2012-11-06 |
Karicheri, Muralidharan |
|
New |
| mtd: lpc32xx_slc: Make driver independent of AMBA DMA engine driver |
2012-08-16 |
stigge@antcom.de |
|
New |
| [RFC,v2,1/2] memory: davinci - add aemif controller platform driver |
2012-11-06 |
Karicheri, Muralidharan |
|
New |
| mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driver |
2012-08-16 |
stigge@antcom.de |
|
New |
| [v3] fs/ext*,f2fs,jffs2,reiserfs: give comments for acl size and count calculation |
2013-01-04 |
Chen Gang |
|
New |
| ARM: LPC32xx: Provide DMA filter callbacks via platform data |
2012-08-16 |
stigge@antcom.de |
|
New |
| [v2] fs/ext*,f2fs,jffs2,reiserfs: give comments for acl size and count calculation |
2013-01-04 |
Chen Gang |
|
New |
| [2/2] UBI: add ioctl for max_beb_per1024 |
2012-08-16 |
Richard Genoud |
|
New |
| [1/2] UBI: replace MTD_UBI_BEB_LIMIT with module parameter |
2012-08-16 |
Richard Genoud |
|
New |
| UBI: use a config value for default BEB limit |
2012-08-16 |
Richard Genoud |
|
New |
| [3/8] mtd: uninitialized variable warning in map.h |
2012-11-06 |
Arnd Bergmann |
|
New |
| [02/10] UBI: Add fastmap stuff to ubi.h |
2012-09-24 |
Richard Weinberger |
|
New |
| [v2,05/14] ARM: OMAP2+: onenand: connected soc info in pdata |
2012-10-08 |
Mohammed Afzal |
|
New |
| [v2,08/14] ARM: OMAP2+: nand: header cleanup |
2012-10-08 |
Mohammed Afzal |
|
New |
| [05/10] UBI: Add fastmap bits to build.c |
2012-09-24 |
Richard Weinberger |
|
New |
| mtd: spear_smi: fix compilation warning |
2012-08-17 |
Artem Bityutskiy |
|
New |
| [5/8] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev |
2012-08-17 |
Richard Genoud |
|
New |
| [v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property |
2012-08-17 |
Stefan Roese |
|
New |
| [v2,14/14] ARM: OMAP2+: gpmc: localize gpmc header |
2012-10-08 |
Mohammed Afzal |
|
New |
| [10/10] UBI: Wire-up fastmap |
2012-09-24 |
Richard Weinberger |
|
New |
| [8/8] UBI: drop CONFIG_MTD_UBI_BEB_LIMIT |
2012-08-17 |
Richard Genoud |
|
New |
