| [V2,2/5] ARM: i.MX53: Add clocks for i.mx53 onewire master. |
2013-01-16 |
Martin Fuzzey |
|
New |
| [V2,2/7] arm/imx6: add imx6q sabrelite board support |
2011-12-13 |
Richard Zhao |
|
New |
| [V2,2/8] ARM: dts: OMAP36xx: Add CPU OPP table |
2013-03-19 |
Nishanth Menon |
|
New |
| [V2,3/3] ARM: imx: enable RBC to support anatop LPM mode |
2013-03-20 |
Anson Huang |
|
New |
| [V2,3/4] ARM: AM335x: Fix warning in timer.c |
2012-11-28 |
Hunter, Jon |
|
New |
| [V2,3/4] CS89x0 : add CS89x0 platform device to the iMX31ADS board |
2012-01-10 |
Jaccon Bastiaansen |
|
New |
| [V2,3/4] arm/imx6q: register arm_clk as cpu to clkdev |
2011-12-16 |
Mark Langsdorf |
|
New |
| [V2,3/4] arm/imx6q: register arm_clk as cpu to clkdev |
2011-12-16 |
Richard Zhao |
|
New |
| [V2,3/7] arm/imx: cpufreq: add multi-core support |
2011-12-13 |
Richard Zhao |
|
New |
| [V2,3/8] ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU |
2013-03-19 |
Nishanth Menon |
|
New |
| [V2,4/4] arm/imx6q: select ARCH_HAS_CPUFREQ |
2011-12-16 |
Richard Zhao |
|
New |
| [V2,4/7] ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h |
2012-10-01 |
Lokesh Vutla |
|
New |
| [V2,4/7] arm/imx: fix cpufreq section mismatch |
2011-12-13 |
Richard Zhao |
|
New |
| [V2,4/8] ARM: dts: OMAP443x: Add CPU OPP table |
2013-03-19 |
Nishanth Menon |
|
New |
| [V2,5/7] arm/imx: add cpu_voltage to cpu_op |
2011-12-13 |
Richard Zhao |
|
New |
| [V2,5/8] ARM: dts: omap4-panda: move generic sections to panda-common |
2013-03-19 |
Nishanth Menon |
|
New |
| [V2,6/7] arm/imx6q: register arm_clk as cpu_clk to clkdev |
2011-12-13 |
Richard Zhao |
|
New |
| [V2,6/8] ARM: dts: OMAP4460: Add CPU OPP table |
2013-03-19 |
Nishanth Menon |
|
New |
| [V2,7/7] arm/imx6q: add cpufreq support |
2011-12-13 |
Richard Zhao |
|
New |
| [V2,7/8] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot |
2013-03-19 |
Nishanth Menon |
|
New |
| [V2,8/8] cpufreq: OMAP: donot allow to be used with device tree |
2013-03-19 |
Nishanth Menon |
|
New |
| [V2] ARM: i.MX5: Allow DT clock providers |
2013-04-15 |
Martin Fuzzey |
|
New |
| [V2] ARM: imx27: add a clock gate to activate SPLL clock |
2013-01-13 |
Gwenhael Goavec-Merou |
|
New |
| [V2] ARM: mx28: Skip OCOTP FEC MAC setup if in DT |
2012-09-25 |
Marek Vasut |
|
New |
| [V2] ARM: mx5: use generic irq chip pm interface for pm functions on |
2011-10-09 |
Jason Wang |
|
New |
| [V2] ARM: mxs: Add initial support for DENX MX28 |
2011-09-07 |
Stefano Babic |
|
New |
| [V2] Add CS890x0 ethernet controller support to the i.MX21ADS |
2011-09-27 |
Jaccon Bastiaansen |
|
New |
| [V2] Add platform driver support to the CS890x driver |
2011-09-27 |
Jaccon Bastiaansen |
|
New |
| [V2] Enable 32 bit flash support for iMX21ADS board |
2011-12-29 |
Jaccon Bastiaansen |
|
New |
| [V2] MMC: PM: add suspend/resume in atmel-mci |
2011-06-30 |
Nicolas Ferre |
|
New |
| [V2] MXS: Remove MMAP_MIN_ADDR setting from mxs_defconfig |
2012-08-03 |
Marek Vasut |
|
New |
| [V2] i2c: imx: make bitrate an u32 type |
2012-07-09 |
Wolfram Sang |
|
New |
| [V3,02/14] ARM: mxc: time: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,04/19] cpuidle: remove en_core_tk_irqen flag |
2013-04-12 |
Daniel Lezcano |
|
New |
| [V3,05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,10/14] ARM: mxs: add clk_prepare/clk_unprepare |
2011-11-11 |
Richard Zhao |
|
New |
| [V3,19/19] ARM: imx: cpuidle: use init/exit common routine |
2013-04-12 |
Daniel Lezcano |
|
New |
| [V3,2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board |
2012-01-14 |
Jaccon Bastiaansen |
|
New |
| [V3,2/5] ARM: i.MX53: Add clocks for i.mx53 onewire master. |
2013-01-29 |
Martin Fuzzey |
|
New |
| [V3,2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp |
2011-12-19 |
Richard Zhao |
|
New |
| [V3,3/3] ARM: imx: enable RBC to support anatop LPM mode |
2013-03-21 |
Anson Huang |
|
New |
| [V3,3/4] arm/imx6: add imx6q sabrelite board support |
2011-12-14 |
Richard Zhao |
|
New |
| [V3,4/4] CS89x0 : add CS89x0 platform device to the iMX31ADS board |
2012-01-14 |
Jaccon Bastiaansen |
|
New |
| [V3,4/4] arm/imx6q-sabrelite: add enet phy ksz9021rn fixup |
2011-12-14 |
Richard Zhao |
|
New |
| [V3,6/7] arm/imx6q: register arm_clk as cpu to clkdev |
2011-12-19 |
Richard Zhao |
|
New |
| [V3,7/7] arm/imx6q: select ARCH_HAS_CPUFREQ |
2011-12-19 |
Richard Zhao |
|
New |
| [V3] ARM: i.MX5: Allow DT clock providers |
2013-04-18 |
Martin Fuzzey |
|
New |
| [V3] ARM: mxs: Update DENX M28 machine and dts file |
2012-08-26 |
Marek Vasut |
|
New |
| [V4,01/15] cpuidle: remove en_core_tk_irqen flag |
2013-04-23 |
Daniel Lezcano |
|
New |
| [V4,02/14] ARM: mxc: time: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,03/15] cpuidle: make a single register function for all |
2013-04-23 |
Daniel Lezcano |
|
New |
| [V4,04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28 |
2011-06-29 |
Huang Shijie |
|
New |
| [V4,10/14] ARM: mxs: add clk_prepare/clk_unprepare |
2011-11-15 |
Richard Zhao |
|
New |
| [V4,15/15] ARM: imx: cpuidle: use init/exit common routine |
2013-04-23 |
Daniel Lezcano |
|
New |
| [V4,2/3] ARM: mxs: add GPMI-NFC device for imx23 |
2011-06-29 |
Huang Shijie |
|
New |
| [V4,2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board |
2012-01-19 |
Jaccon Bastiaansen |
|
New |
| [V4,3/3] ARM: mxs: add GPMI-NFC device for imx28 |
2011-06-29 |
Huang Shijie |
|
New |
| [V4,4/4] CS89x0 : add CS89x0 platform device to the iMX31ADS board |
2012-01-19 |
Jaccon Bastiaansen |
|
New |
| [V4] ARM: i.MX5: Allow DT clock providers |
2013-04-23 |
Martin Fuzzey |
|
New |
| [V5,2/4] CS89x0 : add CS89x0 platform device to the iMX21ADS board |
2012-01-26 |
Jaccon Bastiaansen |
|
New |
| [V5,2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp |
2011-12-27 |
Richard Zhao |
|
New |
| [V5,4/4] CS89x0 : add CS89x0 platform device to the iMX31ADS board |
2012-01-26 |
Jaccon Bastiaansen |
|
New |
| [V5,6/7] arm/imx6q: register arm_clk as cpu to clkdev |
2011-12-27 |
Richard Zhao |
|
New |
| [V5,7/7] arm/imx6q: select ARCH_HAS_CPUFREQ |
2011-12-27 |
Richard Zhao |
|
New |
| [V6,1/5] AHCI Add the AHCI SATA feature on the MX53 platforms |
2011-08-29 |
Richard Zhu |
|
New |
| [V6,2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate for smp |
2011-12-30 |
Richard Zhao |
|
New |
| [V6,3/5] MX53 Enable the AHCI SATA on MX53 ARD board |
2011-08-29 |
Richard Zhu |
|
New |
| [V6,4/5] MX53 Enable the AHCI SATA on MX53 LOCO board |
2011-08-29 |
Richard Zhu |
|
New |
| [V6,5/5] MX53 Enable the AHCI SATA on MX53 SMD board |
2011-08-29 |
Richard Zhu |
|
New |
| [V6,6/7] arm/imx6q: register arm_clk as cpu to clkdev |
2011-12-30 |
Richard Zhao |
|
New |
| [V6,7/7] arm/imx6q: select ARCH_HAS_CPUFREQ |
2011-12-30 |
Richard Zhao |
|
New |
| [V7,1/5] AHCI Add the AHCI SATA feature on the MX53 platforms |
2011-08-30 |
Richard Zhu |
|
New |
| [V7,1/5] AHCI Add the AHCI SATA feature on the MX53 platforms |
2011-08-31 |
Richard Zhu |
|
New |
| [V7,3/5] MX53 Enable the AHCI SATA on MX53 ARD board |
2011-08-30 |
Richard Zhu |
|
New |
| [V7,3/5] MX53 Enable the AHCI SATA on MX53 ARD board |
2011-08-31 |
Richard Zhu |
|
New |
| [V7,4/5] MX53 Enable the AHCI SATA on MX53 LOCO board |
2011-08-30 |
Richard Zhu |
|
New |
| [V7,4/5] MX53 Enable the AHCI SATA on MX53 LOCO board |
2011-08-31 |
Richard Zhu |
|
New |
| [V7,5/5] MX53 Enable the AHCI SATA on MX53 SMD board |
2011-08-30 |
Richard Zhu |
|
New |
| [V7,5/5] MX53 Enable the AHCI SATA on MX53 SMD board |
2011-08-31 |
Richard Zhu |
|
New |
| [V8,1/5] AHCI Add the AHCI SATA feature on the MX53 platforms |
2011-09-22 |
Richard Zhu |
|
New |
| [V8,3/5] MX53 Enable the AHCI SATA on MX53 ARD board |
2011-09-22 |
Richard Zhu |
|
New |
| [V8,4/5] MX53 Enable the AHCI SATA on MX53 LOCO board |
2011-09-22 |
Richard Zhu |
|
New |
| [V8,5/5] MX53 Enable the AHCI SATA on MX53 SMD board |
2011-09-22 |
Richard Zhu |
|
New |
| [V9,1/5] AHCI Add the AHCI SATA feature on the MX53 platforms |
2011-09-28 |
Richard Zhu |
|
New |
| [V9,3/5] MX53 Enable the AHCI SATA on MX53 ARD board |
2011-09-28 |
Richard Zhu |
|
New |
| [V9,4/5] MX53 Enable the AHCI SATA on MX53 LOCO board |
2011-09-28 |
Richard Zhu |
|
New |
| [V9,5/5] MX53 Enable the AHCI SATA on MX53 SMD board |
2011-09-28 |
Richard Zhu |
|
New |
