diff mbox series

[3/5] ARM: dts: imx7d-pinfunc: add mux for OSC32K_32K_OUT via GPIO1_IO03

Message ID 20231127-b4-imx7-var-som-gome-v1-3-f26f88f2d0bc@pengutronix.de
State Not Applicable
Headers show
Series ARM: dts: add support for Gossen Metrawatt Profitest | expand

Commit Message

Roland Hieber Nov. 27, 2023, 9:11 p.m. UTC 
From: Philipp Zabel <p.zabel@pengutronix.de>

Add the missing pinmux setting for alternate function 4 on the
GPIO1_IO03 pin, which muxes the pin as 32 kHz oscillator output.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
index 69f2c1ec8254..1530631b0d70 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
@@ -33,6 +33,7 @@ 
 #define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT                        0x000C 0x003C 0x0000 0x1 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2               0x000C 0x003C 0x0570 0x2 0x3
 #define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK                       0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__OSC32K_32K_OUT                  0x000C 0x003C 0x0000 0x4 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2                       0x000C 0x003C 0x0000 0x5 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT                    0x000C 0x003C 0x0000 0x6 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID                     0x000C 0x003C 0x0730 0x7 0x3