diff mbox series

[RFC,3/3] arm64: dts: allwinner: enhance A64 .dtsi with new pinctrl binding

Message ID 20171113012523.2328-4-andre.przywara@arm.com
State New
Headers show
Series pinctrl: sunxi: Add DT-based generic pinctrl driver | expand

Commit Message

Andre Przywara Nov. 13, 2017, 1:25 a.m. UTC
Enhance the existing pinctrl DT nodes for the Allwinner A64 SoC to
include the new properties the generic, DT-based binding introduced.
This allows any generic driver to support this SoC as well.
The DT nodes stay fully compatible with the old binding, so existing
drivers continue to work without restrictions.
But on top of that new DT users can directly use the information here
and can do without a hardcoded table.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 8c8db1b057df..58fdae32240a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -269,7 +269,8 @@ 
 		};
 
 		pio: pinctrl@1c20800 {
-			compatible = "allwinner,sun50i-a64-pinctrl";
+			compatible = "allwinner,sun50i-a64-pinctrl",
+				     "allwinner,sunxi-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
@@ -279,16 +280,22 @@ 
 			#gpio-cells = <3>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
+			allwinner,gpio-pins = <0 10 17 25 18 7 14 12>;
+			allwinner,irq-pin-map = <0 0 1 0 6 10>,
+						<1 0 6 0 6 14>,
+						<2 0 7 0 6 12>;
 
 			i2c1_pins: i2c1_pins {
 				pins = "PH2", "PH3";
 				function = "i2c1";
+				pinmux = <2>;
 			};
 
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
 				function = "mmc0";
+				pinmux = <2>;
 				drive-strength = <30>;
 				bias-pull-up;
 			};
@@ -297,6 +304,7 @@ 
 				pins = "PG0", "PG1", "PG2", "PG3",
 				       "PG4", "PG5";
 				function = "mmc1";
+				pinmux = <2>;
 				drive-strength = <30>;
 				bias-pull-up;
 			};
@@ -306,6 +314,7 @@ 
 				       "PC10","PC11", "PC12", "PC13",
 				       "PC14", "PC15", "PC16";
 				function = "mmc2";
+				pinmux = <3>;
 				drive-strength = <30>;
 				bias-pull-up;
 			};
@@ -314,6 +323,7 @@ 
 				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
 				       "PD18", "PD19", "PD20", "PD22", "PD23";
 				function = "emac";
+				pinmux = <4>;
 				drive-strength = <40>;
 			};
 
@@ -322,42 +332,50 @@ 
 				       "PD13", "PD15", "PD16", "PD17", "PD18",
 				       "PD19", "PD20", "PD21", "PD22", "PD23";
 				function = "emac";
+				pinmux = <4>;
 				drive-strength = <40>;
 			};
 
 			uart0_pins_a: uart0@0 {
 				pins = "PB8", "PB9";
 				function = "uart0";
+				pinmux = <4>;
 			};
 
 			uart1_pins: uart1_pins {
 				pins = "PG6", "PG7";
 				function = "uart1";
+				pinmux = <2>;
 			};
 
 			uart1_rts_cts_pins: uart1_rts_cts_pins {
 				pins = "PG8", "PG9";
 				function = "uart1";
+				pinmux = <2>;
 			};
 
 			uart2_pins: uart2-pins {
 				pins = "PB0", "PB1";
 				function = "uart2";
+				pinmux = <2>;
 			};
 
 			uart3_pins: uart3-pins {
 				pins = "PD0", "PD1";
 				function = "uart3";
+				pinmux = <3>;
 			};
 
 			uart4_pins: uart4-pins {
 				pins = "PD2", "PD3";
 				function = "uart4";
+				pinmux = <3>;
 			};
 
 			uart4_rts_cts_pins: uart4-rts-cts-pins {
 				pins = "PD4", "PD5";
 				function = "uart4";
+				pinmux = <3>;
 			};
 		};
 
@@ -487,7 +505,8 @@ 
 		};
 
 		r_pio: pinctrl@01f02c00 {
-			compatible = "allwinner,sun50i-a64-r-pinctrl";
+			compatible = "allwinner,sun50i-a64-r-pinctrl",
+				     "allwinner,sunxi-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
@@ -496,10 +515,14 @@ 
 			#gpio-cells = <3>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
+			allwinner,gpio-pins = <13>;
+			allwinner,port-base = <11>;
+			allwinner,irq-pin-map = <0 0 11 0 6 13>;
 
 			r_rsb_pins: rsb@0 {
 				pins = "PL0", "PL1";
 				function = "s_rsb";
+				pinmux = <2>;
 			};
 		};