@@ -26,7 +26,7 @@ summary_file = None
success_file = None
def summary(txt):
- print txt
+ print(txt)
if summary_file:
with open(summary_file, 'a') as f:
f.write(txt + "\n")
@@ -43,11 +43,11 @@ def wpas_connect():
try:
ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
except OSError as error:
- print "Could not find hostapd: ", error
+ print("Could not find hostapd: ", error)
return None
if len(ifaces) < 1:
- print "No hostapd control interface found"
+ print("No hostapd control interface found")
return None
for ctrl in ifaces:
@@ -133,23 +133,23 @@ class HandoverServer(nfc.handover.HandoverServer):
def process_request(self, request):
summary("HandoverServer - request received")
try:
- print "Parsed handover request: " + request.pretty()
+ print("Parsed handover request: " + request.pretty())
except Exception as e:
- print e
- print str(request).encode("hex")
+ print(e)
+ print(str(request).encode("hex"))
sel = nfc.ndef.HandoverSelectMessage(version="1.2")
for carrier in request.carriers:
- print "Remote carrier type: " + carrier.type
+ print("Remote carrier type: " + carrier.type)
if carrier.type == "application/vnd.wfa.wsc":
summary("WPS carrier type match - add WPS carrier record")
data = wpas_get_handover_sel()
if data is None:
summary("Could not get handover select carrier record from hostapd")
continue
- print "Handover select carrier record from hostapd:"
- print data.encode("hex")
+ print("Handover select carrier record from hostapd:")
+ print(data.encode("hex"))
if "OK" in wpas_report_handover(carrier.record, data):
success_report("Handover reported successfully")
else:
@@ -158,12 +158,12 @@ class HandoverServer(nfc.handover.HandoverServer):
message = nfc.ndef.Message(data);
sel.add_carrier(message[0], "active", message[1:])
- print "Handover select:"
+ print("Handover select:")
try:
- print sel.pretty()
+ print(sel.pretty())
except Exception as e:
- print e
- print str(sel).encode("hex")
+ print(e)
+ print(str(sel).encode("hex"))
summary("Sending handover select")
self.success = True
@@ -174,7 +174,7 @@ def wps_tag_read(tag):
success = False
if len(tag.ndef.message):
for record in tag.ndef.message:
- print "record type " + record.type
+ print("record type " + record.type)
if record.type == "application/vnd.wfa.wsc":
summary("WPS tag - send to hostapd")
success = wpas_tag_read(tag.ndef.message)
@@ -193,7 +193,7 @@ def rdwr_connected_write(tag):
global write_data
tag.ndef.message = str(write_data)
success_report("Tag write succeeded")
- print "Done - remove tag"
+ print("Done - remove tag")
global only_one
if only_one:
global continue_loop
@@ -211,7 +211,7 @@ def wps_write_config_tag(clf, wait_remove=True):
summary("Could not get WPS config token from hostapd")
return
- print "Touch an NFC tag"
+ print("Touch an NFC tag")
clf.connect(rdwr={'on-connect': rdwr_connected_write})
@@ -224,7 +224,7 @@ def wps_write_password_tag(clf, wait_remove=True):
summary("Could not get WPS password token from hostapd")
return
- print "Touch an NFC tag"
+ print("Touch an NFC tag")
clf.connect(rdwr={'on-connect': rdwr_connected_write})
@@ -233,11 +233,11 @@ def rdwr_connected(tag):
summary("Tag connected: " + str(tag))
if tag.ndef:
- print "NDEF tag: " + tag.type
+ print("NDEF tag: " + tag.type)
try:
- print tag.ndef.message.pretty()
+ print(tag.ndef.message.pretty())
except Exception as e:
- print e
+ print(e)
success = wps_tag_read(tag)
if only_one and success:
global continue_loop
@@ -250,13 +250,13 @@ def rdwr_connected(tag):
def llcp_startup(clf, llc):
- print "Start LLCP server"
+ print("Start LLCP server")
global srv
srv = HandoverServer(llc)
return llc
def llcp_connected(llc):
- print "P2P LLCP connected"
+ print("P2P LLCP connected")
global wait_connection
wait_connection = False
global srv
@@ -304,7 +304,7 @@ def main():
try:
if not clf.open("usb"):
- print "Could not open connection with an NFC device"
+ print("Could not open connection with an NFC device")
raise SystemExit
if args.command == "write-config":
@@ -317,7 +317,7 @@ def main():
global continue_loop
while continue_loop:
- print "Waiting for a tag or peer to be touched"
+ print("Waiting for a tag or peer to be touched")
wait_connection = True
try:
if not clf.connect(rdwr={'on-connect': rdwr_connected},
@@ -325,7 +325,7 @@ def main():
'on-connect': llcp_connected}):
break
except Exception as e:
- print "clf.connect failed"
+ print("clf.connect failed")
global srv
if only_one and srv and srv.success:
@@ -75,11 +75,11 @@ class HWSimRadio(object):
def create(args):
- print 'Created radio %d' % c.create_radio(n_channels=args.channels,
- use_chanctx=args.chanctx)
+ print('Created radio %d' % c.create_radio(n_channels=args.channels,
+ use_chanctx=args.chanctx))
def destroy(args):
- print c.destroy_radio(args.radio)
+ print(c.destroy_radio(args.radio))
if __name__ == '__main__':
import argparse
@@ -111,7 +111,7 @@ class RFKill(object):
@classmethod
def block_all(cls, t=TYPE_ALL):
rfk = open('/dev/rfkill', 'w')
- print rfk
+ print(rfk)
s = struct.pack(_event_struct, 0, t, _OP_CHANGE_ALL, 1, 0)
rfk.write(s)
rfk.close()
@@ -145,6 +145,6 @@ class RFKill(object):
if __name__ == "__main__":
for r, s, h in RFKill.list():
- print "%d: %s: %s" % (r.idx, r.name, r.type_name)
- print "\tSoft blocked: %s" % ("yes" if s else "no")
- print "\tHard blocked: %s" % ("yes" if h else "no")
+ print("%d: %s: %s" % (r.idx, r.name, r.type_name))
+ print("\tSoft blocked: %s" % ("yes" if s else "no"))
+ print("\tHard blocked: %s" % ("yes" if h else "no"))
@@ -49,7 +49,7 @@ def reset_devs(dev, apdev):
d.reset()
except Exception as e:
logger.info("Failed to reset device " + d.ifname)
- print str(e)
+ print(str(e))
ok = False
wpas = None
@@ -76,7 +76,7 @@ def reset_devs(dev, apdev):
hapd.remove(ap['ifname'])
except Exception as e:
logger.info("Failed to remove hostapd interface")
- print str(e)
+ print(str(e))
ok = False
return ok
@@ -94,8 +94,8 @@ def add_log_file(conn, test, run, type, path):
conn.execute(sql, params)
conn.commit()
except Exception as e:
- print "sqlite: " + str(e)
- print "sql: %r" % (params, )
+ print("sqlite: " + str(e))
+ print("sql: %r" % (params, ))
def report(conn, prefill, build, commit, run, test, result, duration, logdir,
sql_commit=True):
@@ -113,8 +113,8 @@ def report(conn, prefill, build, commit, run, test, result, duration, logdir,
if sql_commit:
conn.commit()
except Exception as e:
- print "sqlite: " + str(e)
- print "sql: %r" % (params, )
+ print("sqlite: " + str(e))
+ print("sql: %r" % (params, ))
if result == "FAIL":
for log in [ "log", "log0", "log1", "log2", "log3", "log5",
@@ -142,7 +142,7 @@ class DataCollector(object):
l += self._trace_cmd.stdout.read(1)
res = self._trace_cmd.returncode
if res:
- print "Failed calling trace-cmd: returned exit status %d" % res
+ print("Failed calling trace-cmd: returned exit status %d" % res)
sys.exit(1)
if self._dbus:
output = os.path.abspath(os.path.join(self._logdir, '%s.dbus' % (self._testname, )))
@@ -152,7 +152,7 @@ class DataCollector(object):
cwd=self._logdir)
res = self._dbus_cmd.returncode
if res:
- print "Failed calling dbus-monitor: returned exit status %d" % res
+ print("Failed calling dbus-monitor: returned exit status %d" % res)
sys.exit(1)
def __exit__(self, type, value, traceback):
if self._tracing:
@@ -249,12 +249,12 @@ def main():
args = parser.parse_args()
if (args.tests and args.testmodules) or (args.tests and args.mfile) or (args.testmodules and args.mfile):
- print 'Invalid arguments - only one of (test, test modules, modules file) can be given.'
+ print('Invalid arguments - only one of (test, test modules, modules file) can be given.')
sys.exit(2)
if args.database:
if not sqlite3_imported:
- print "No sqlite3 module found"
+ print("No sqlite3 module found")
sys.exit(2)
conn = sqlite3.connect(args.database)
conn.execute('CREATE TABLE IF NOT EXISTS results (test,result,run,time,duration,build,commitid)')
@@ -295,17 +295,17 @@ def main():
for t in tests_to_run:
name = t.__name__.replace('test_', '', 1)
if t.__doc__ is None:
- print name + " - MISSING DESCRIPTION"
+ print(name + " - MISSING DESCRIPTION")
else:
- print name + " - " + t.__doc__
+ print(name + " - " + t.__doc__)
if conn:
sql = 'INSERT OR REPLACE INTO tests(test,description) VALUES (?, ?)'
params = (name, t.__doc__)
try:
conn.execute(sql, params)
except Exception as e:
- print "sqlite: " + str(e)
- print "sql: %r" % (params,)
+ print("sqlite: " + str(e))
+ print("sql: %r" % (params,))
if conn:
conn.commit()
conn.close()
@@ -385,7 +385,7 @@ def main():
count = 0
if args.stdin_ctrl:
- print "READY"
+ print("READY")
sys.stdout.flush()
num_tests = 0
else:
@@ -413,7 +413,7 @@ def main():
t = tt
break
if not t:
- print "NOT-FOUND"
+ print("NOT-FOUND")
sys.stdout.flush()
continue
else:
@@ -463,7 +463,7 @@ def main():
msg = "START {} {}/{}".format(name, count, num_tests)
logger.info(msg)
if args.loglevel == logging.WARNING:
- print msg
+ print(msg)
sys.stdout.flush()
if t.__doc__:
logger.info("Test: " + t.__doc__)
@@ -480,7 +480,7 @@ def main():
except Exception as e:
logger.info("Failed to issue TEST-START before " + name + " for " + d.ifname)
logger.info(e)
- print "FAIL " + name + " - could not start test"
+ print("FAIL " + name + " - could not start test")
if conn:
conn.close()
conn = None
@@ -504,7 +504,7 @@ def main():
if country != "00":
d.dump_monitor()
logger.info("Country code not reset back to 00: is " + country)
- print "Country code not reset back to 00: is " + country
+ print("Country code not reset back to 00: is " + country)
result = "FAIL"
# Try to wait for cfg80211 regulatory state to
@@ -516,10 +516,10 @@ def main():
if country == "00":
break
if country == "00":
- print "Country code cleared back to 00"
+ print("Country code cleared back to 00")
logger.info("Country code cleared back to 00")
else:
- print "Country code remains set - expect following test cases to fail"
+ print("Country code remains set - expect following test cases to fail")
logger.info("Country code remains set - expect following test cases to fail")
break
except HwsimSkip as e:
@@ -535,7 +535,7 @@ def main():
logger.info(e)
traceback.print_exc()
if args.loglevel == logging.WARNING:
- print "Exception: " + str(e)
+ print("Exception: " + str(e))
result = "FAIL"
open('/dev/kmsg', 'w').write('TEST-STOP %s @%.6f\n' % (name, time.time()))
for d in dev:
@@ -547,7 +547,7 @@ def main():
logger.info(e)
result = "FAIL"
if args.no_reset:
- print "Leaving devices in current state"
+ print("Leaving devices in current state")
else:
reset_ok = reset_devs(dev, apdev)
wpas = None
@@ -566,8 +566,8 @@ def main():
try:
hapd = HostapdGlobal()
except Exception as e:
- print "Failed to connect to hostapd interface"
- print str(e)
+ print("Failed to connect to hostapd interface")
+ print(str(e))
reset_ok = False
result = "FAIL"
hapd = None
@@ -609,11 +609,11 @@ def main():
result = "{} {} {} {}".format(result, name, diff.total_seconds(), end)
logger.info(result)
if args.loglevel == logging.WARNING:
- print result
+ print(result)
sys.stdout.flush()
if not reset_ok:
- print "Terminating early due to device reset failure"
+ print("Terminating early due to device reset failure")
break
if args.stdin_ctrl:
set_term_echo(sys.stdin.fileno(), True)
@@ -635,15 +635,15 @@ def main():
logger.info("skipped {} test case(s)".format(len(skipped)))
logger.info("failed tests: " + ' '.join(failed))
if args.loglevel == logging.WARNING:
- print "failed tests: " + ' '.join(failed)
+ print("failed tests: " + ' '.join(failed))
sys.exit(1)
logger.info("passed all {} test case(s)".format(len(passed)))
if len(skipped):
logger.info("skipped {} test case(s)".format(len(skipped)))
if args.loglevel == logging.WARNING:
- print "passed all {} test case(s)".format(len(passed))
+ print("passed all {} test case(s)".format(len(passed)))
if len(skipped):
- print "skipped {} test case(s)".format(len(skipped))
+ print("skipped {} test case(s)".format(len(skipped)))
if __name__ == "__main__":
main()
@@ -3365,7 +3365,7 @@ def test_ap_hs20_req_operator_icon(dev, apdev):
if "hs20_operator_icon_metadata" not in bss:
raise Exception("hs20_operator_icon_metadata missing from BSS entry")
if bss["hs20_operator_icon_metadata"] != binascii.hexlify(value):
- print binascii.hexlify(value)
+ print(binascii.hexlify(value))
raise Exception("Unexpected hs20_operator_icon_metadata value: " +
bss["hs20_operator_icon_metadata"])
@@ -9292,7 +9292,7 @@ def test_ap_wps_upnp_web_oom(dev, apdev, params):
conn.request("GET", "/unknown")
try:
resp = conn.getresponse()
- print resp.status
+ print(resp.status)
except:
pass
@@ -1695,7 +1695,7 @@ def test_gas_anqp_venue_url2(dev, apdev):
if 'anqp[277]' not in bss:
raise Exception("Venue URL ANQP-element not seen")
if bss['anqp[277]'] != venue_url:
- print venue_url
+ print(venue_url)
raise Exception("Unexpected Venue URL ANQP-element value: " + bss['anqp[277]'])
if 'anqp_capability_list' not in bss:
@@ -1316,7 +1316,7 @@ def test_p2p_msg_go_neg_req(dev, apdev):
hapd.mgmt_tx(msg)
frame = hapd.mgmt_rx(timeout=0.1)
if frame is not None:
- print frame
+ print(frame)
raise Exception("Unexpected GO Neg Response")
# missing atributes
@@ -1485,7 +1485,7 @@ def test_wpas_ctrl_dump(dev, apdev):
if res == 'FAIL\n':
res = "null"
if res != vals[field]:
- print "'{}' != '{}'".format(res, vals[field])
+ print("'{}' != '{}'".format(res, vals[field]))
raise Exception("Mismatch in config field " + field)
if "beacon_int" not in vals:
raise Exception("Missing config field")
@@ -374,7 +374,7 @@ def main():
if args.long:
extra_args += [ '--long' ]
if args.codecov:
- print "Code coverage - build separate binaries"
+ print("Code coverage - build separate binaries")
logdir = os.path.join(dir, str(timestamp))
os.makedirs(logdir)
subprocess.check_call([os.path.join(scriptsdir, 'build-codecov.sh'),
@@ -427,7 +427,7 @@ def main():
vm = {}
for i in range(0, num_servers):
- print("\rStarting virtual machine {}/{}".format(i + 1, num_servers)),
+ print(("\rStarting virtual machine {}/{}".format(i + 1, num_servers)), end=' ')
logger.info("Starting virtual machine {}/{}".format(i + 1, num_servers))
cmd = [os.path.join(scriptsdir, 'vm-run.sh'), '--delay', str(i),
'--timestamp', str(timestamp),
@@ -448,7 +448,7 @@ def main():
fd = stream.fileno()
fl = fcntl.fcntl(fd, fcntl.F_GETFL)
fcntl.fcntl(fd, fcntl.F_SETFL, fl | os.O_NONBLOCK)
- print
+ print()
curses.wrapper(show_progress)
@@ -459,26 +459,26 @@ def main():
failed = get_failed(vm)
if first_run_failures:
- print "To re-run same failure sequence(s):"
+ print("To re-run same failure sequence(s):")
for i in range(0, num_servers):
if len(vm[i]['failed']) == 0:
continue
- print "./vm-run.sh",
+ print("./vm-run.sh", end=' ')
if args.long:
- print "--long",
+ print("--long", end=' ')
skip = len(vm[i]['fail_seq'])
skip -= min(skip, 30)
for t in vm[i]['fail_seq']:
if skip > 0:
skip -= 1
continue
- print t,
- print
- print "Failed test cases:"
+ print(t, end=' ')
+ print()
+ print("Failed test cases:")
for f in first_run_failures:
- print f,
+ print(f, end=' ')
logger.info("Failed: " + f)
- print
+ print()
double_failed = []
for name in failed:
double_failed.append(name)
@@ -487,21 +487,21 @@ def main():
if not rerun_failures:
pass
elif failed and not double_failed:
- print "All failed cases passed on retry"
+ print("All failed cases passed on retry")
logger.info("All failed cases passed on retry")
elif double_failed:
- print "Failed even on retry:"
+ print("Failed even on retry:")
for f in double_failed:
- print f,
+ print(f, end=' ')
logger.info("Failed on retry: " + f)
- print
+ print()
res = "TOTAL={} PASS={} FAIL={} SKIP={}".format(total_started,
total_passed,
total_failed,
total_skipped)
print(res)
logger.info(res)
- print "Logs: " + dir + '/' + str(timestamp)
+ print("Logs: " + dir + '/' + str(timestamp))
logger.info("Logs: " + dir + '/' + str(timestamp))
for i in range(0, num_servers):
@@ -511,11 +511,11 @@ def main():
log = '{}/{}.srv.{}/console'.format(dir, timestamp, i + 1)
with open(log, 'r') as f:
if "Kernel panic" in f.read():
- print "Kernel panic in " + log
+ print("Kernel panic in " + log)
logger.info("Kernel panic in " + log)
if codecov:
- print "Code coverage - preparing report"
+ print("Code coverage - preparing report")
for i in range(num_servers):
subprocess.check_call([os.path.join(scriptsdir,
'process-codecov.sh'),
@@ -523,7 +523,7 @@ def main():
str(i)])
subprocess.check_call([os.path.join(scriptsdir, 'combine-codecov.sh'),
logdir])
- print "file://%s/index.html" % logdir
+ print("file://%s/index.html" % logdir)
logger.info("Code coverage report: file://%s/index.html" % logdir)
if double_failed or (failed and not rerun_failures):
@@ -240,7 +240,7 @@ class WpaSupplicant:
iter = iter + 1
if iter == 60:
logger.error(self.ifname + ": Driver scan state did not clear")
- print "Trying to clear cfg80211/mac80211 scan state"
+ print("Trying to clear cfg80211/mac80211 scan state")
status, buf = self.host.execute(["ifconfig", self.ifname, "down"])
if status != 0:
logger.info("ifconfig failed: " + buf)
@@ -30,10 +30,10 @@ from utils import HwsimSkip
from hwsim_wrapper import run_hwsim_test
def usage():
- print "USAGE: " + sys.argv[0] + " -t devices"
- print "USAGE: " + sys.argv[0] + " -t check_devices"
- print "USAGE: " + sys.argv[0] + " -d <dut_name> -t <all|sanity|tests_to_run> [-r <ref_name>] [-c <cfg_file.py>] [-m <all|monitor_name>] [-h hwsim_tests][-R][-T][-P][-v]"
- print "USAGE: " + sys.argv[0]
+ print("USAGE: " + sys.argv[0] + " -t devices")
+ print("USAGE: " + sys.argv[0] + " -t check_devices")
+ print("USAGE: " + sys.argv[0] + " -d <dut_name> -t <all|sanity|tests_to_run> [-r <ref_name>] [-c <cfg_file.py>] [-m <all|monitor_name>] [-h hwsim_tests][-R][-T][-P][-v]")
+ print("USAGE: " + sys.argv[0])
def get_devices(devices, duts, refs, monitors):
for dut in duts:
@@ -215,15 +215,15 @@ def main():
# print help
if requested_tests[0] == "help" and len(requested_hwsim_tests) == 0:
usage()
- print "\nAvailable Devices:"
+ print("\nAvailable Devices:")
for device in devices:
- print "\t", device['name']
- print "\nAvailable tests:"
+ print("\t", device['name'])
+ print("\nAvailable tests:")
for test in test_names:
- print "\t", test
- print "\nAvailable hwsim tests:"
+ print("\t", test)
+ print("\nAvailable hwsim tests:")
for hwsim_test in hwsim_tests:
- print "\t", hwsim_test.__name__.replace('test_', '', 1)
+ print("\t", hwsim_test.__name__.replace('test_', '', 1))
return
# show/check devices
@@ -24,57 +24,57 @@ import hostapd
def show_devices(devices, setup_params):
"""Show/check available devices"""
- print "Devices:"
+ print("Devices:")
for device in devices:
host = rutils.get_host(devices, device['name'])
# simple check if authorized_keys works correctly
status, buf = host.execute(["id"])
if status != 0:
- print "[" + host.name + "] - ssh communication: FAILED"
+ print("[" + host.name + "] - ssh communication: FAILED")
continue
else:
- print "[" + host.name + "] - ssh communication: OK"
+ print("[" + host.name + "] - ssh communication: OK")
# check setup_hw works correctly
rutils.setup_hw_host(host, setup_params)
# show uname
status, buf = host.execute(["uname", "-s", "-n", "-r", "-m", "-o"])
- print "\t" + buf
+ print("\t" + buf)
# show ifconfig
ifaces = re.split('; | |, ', host.ifname)
for iface in ifaces:
status, buf = host.execute(["ifconfig", iface])
if status != 0:
- print "\t" + iface + " failed\n"
+ print("\t" + iface + " failed\n")
continue
lines = buf.splitlines()
for line in lines:
- print "\t" + line
+ print("\t" + line)
# check hostapd, wpa_supplicant, iperf exist
status, buf = host.execute([setup_params['wpa_supplicant'], "-v"])
if status != 0:
- print "\t" + setup_params['wpa_supplicant'] + " not find\n"
+ print("\t" + setup_params['wpa_supplicant'] + " not find\n")
continue
lines = buf.splitlines()
for line in lines:
- print "\t" + line
- print ""
+ print("\t" + line)
+ print("")
status, buf = host.execute([setup_params['hostapd'], "-v"])
if status != 1:
- print "\t" + setup_params['hostapd'] + " not find\n"
+ print("\t" + setup_params['hostapd'] + " not find\n")
continue
lines = buf.splitlines()
for line in lines:
- print "\t" + line
- print ""
+ print("\t" + line)
+ print("")
status, buf = host.execute([setup_params['iperf'], "-v"])
if status != 0 and status != 1:
- print "\t" + setup_params['iperf'] + " not find\n"
+ print("\t" + setup_params['iperf'] + " not find\n")
continue
lines = buf.splitlines()
for line in lines:
- print "\t" + line
- print ""
+ print("\t" + line)
+ print("")
def check_device(devices, setup_params, dev_name, monitor=False):
host = rutils.get_host(devices, dev_name)
@@ -136,7 +136,7 @@ def main():
results = res[i].get(False)
except:
results = "N/A"
- print "%d: %s" % (i, results)
+ print("%d: %s" % (i, results))
if __name__ == "__main__":
main()
@@ -12,21 +12,21 @@ WPAS_DBUS_OPATH = "/fi/w1/wpa_supplicant1"
WPAS_DBUS_INTERFACES_INTERFACE = "fi.w1.wpa_supplicant1.Interface"
def usage():
- print "Usage: %s <ifname>" % sys.argv[0]
- print "Press Ctrl-C to stop"
+ print("Usage: %s <ifname>" % sys.argv[0])
+ print("Press Ctrl-C to stop")
def ProbeRequest(args):
if 'addr' in args:
- print '%.2x:%.2x:%.2x:%.2x:%.2x:%.2x' % tuple(args['addr']),
+ print('%.2x:%.2x:%.2x:%.2x:%.2x:%.2x' % tuple(args['addr']), end=' ')
if 'dst' in args:
- print '-> %.2x:%.2x:%.2x:%.2x:%.2x:%.2x' % tuple(args['dst']),
+ print('-> %.2x:%.2x:%.2x:%.2x:%.2x:%.2x' % tuple(args['dst']), end=' ')
if 'bssid' in args:
- print '(bssid %.2x:%.2x:%.2x:%.2x:%.2x:%.2x)' % tuple(args['dst']),
+ print('(bssid %.2x:%.2x:%.2x:%.2x:%.2x:%.2x)' % tuple(args['dst']), end=' ')
if 'signal' in args:
- print 'signal:%d' % args['signal'],
+ print('signal:%d' % args['signal'], end=' ')
if 'ies' in args:
- print 'have IEs (%d bytes)' % len(args['ies']),
- print ''
+ print('have IEs (%d bytes)' % len(args['ies']), end=' ')
+ print('')
if __name__ == "__main__":
global bus
@@ -25,11 +25,11 @@ def wpas_connect():
try:
ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
except OSError as error:
- print "Could not find wpa_supplicant: ", error
+ print("Could not find wpa_supplicant: ", error)
return None
if len(ifaces) < 1:
- print "No wpa_supplicant control interface found"
+ print("No wpa_supplicant control interface found")
return None
for ctrl in ifaces:
@@ -55,27 +55,27 @@ def dpp_logcat():
continue
if not uri.startswith('DPP:'):
continue
- print "Found DPP bootstrap info URI:"
- print uri
+ print("Found DPP bootstrap info URI:")
+ print(uri)
wpas = wpas_connect()
if not wpas:
- print "Could not connect to wpa_supplicant"
- print
+ print("Could not connect to wpa_supplicant")
+ print()
continue
res = wpas.request("DPP_QR_CODE " + uri);
try:
id = int(res)
except ValueError:
- print "QR Code URI rejected"
+ print("QR Code URI rejected")
continue
- print "QR Code URI accepted - ID=%d" % id
- print wpas.request("DPP_BOOTSTRAP_INFO %d" % id)
+ print("QR Code URI accepted - ID=%d" % id)
+ print(wpas.request("DPP_BOOTSTRAP_INFO %d" % id))
del wpas
def dpp_display(curve):
wpas = wpas_connect()
if not wpas:
- print "Could not connect to wpa_supplicant"
+ print("Could not connect to wpa_supplicant")
return
res = wpas.request("STATUS")
addr = None
@@ -93,18 +93,18 @@ def dpp_display(curve):
try:
id = int(res)
except ValueError:
- print "Failed to generate bootstrap info URI"
+ print("Failed to generate bootstrap info URI")
return
- print "Bootstrap information - ID=%d" % id
- print wpas.request("DPP_BOOTSTRAP_INFO %d" % id)
+ print("Bootstrap information - ID=%d" % id)
+ print(wpas.request("DPP_BOOTSTRAP_INFO %d" % id))
uri = wpas.request("DPP_BOOTSTRAP_GET_URI %d" % id)
- print uri
- print "ID=%d" % id
+ print(uri)
+ print("ID=%d" % id)
qr = qrcode.QRCode(error_correction=qrcode.constants.ERROR_CORRECT_M,
border=3)
qr.add_data(uri, optimize=5)
qr.print_ascii(tty=True)
- print "ID=%d" % id
+ print("ID=%d" % id)
del wpas
def main():
@@ -37,7 +37,7 @@ summary_file = None
success_file = None
def summary(txt):
- print txt
+ print(txt)
if summary_file:
with open(summary_file, 'a') as f:
f.write(txt + "\n")
@@ -54,11 +54,11 @@ def wpas_connect():
try:
ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
except OSError as error:
- print "Could not find wpa_supplicant: ", error
+ print("Could not find wpa_supplicant: ", error)
return None
if len(ifaces) < 1:
- print "No wpa_supplicant control interface found"
+ print("No wpa_supplicant control interface found")
return None
for ctrl in ifaces:
@@ -66,7 +66,7 @@ def wpas_connect():
if ifname not in ctrl:
continue
try:
- print "Trying to use control interface " + ctrl
+ print("Trying to use control interface " + ctrl)
wpas = wpaspy.Ctrl(ctrl)
return wpas
except Exception as e:
@@ -160,30 +160,30 @@ def p2p_handover_client(llc):
if (data == None):
summary("Could not get handover request carrier record from wpa_supplicant")
return
- print "Handover request carrier record from wpa_supplicant: " + data.encode("hex")
+ print("Handover request carrier record from wpa_supplicant: " + data.encode("hex"))
datamsg = nfc.ndef.Message(data)
message.add_carrier(datamsg[0], "active", datamsg[1:])
global include_wps_req
if include_wps_req:
- print "Handover request (pre-WPS):"
+ print("Handover request (pre-WPS):")
try:
- print message.pretty()
+ print(message.pretty())
except Exception as e:
- print e
+ print(e)
data = wpas_get_handover_req_wps()
if data:
- print "Add WPS request in addition to P2P"
+ print("Add WPS request in addition to P2P")
datamsg = nfc.ndef.Message(data)
message.add_carrier(datamsg[0], "active", datamsg[1:])
- print "Handover request:"
+ print("Handover request:")
try:
- print message.pretty()
+ print(message.pretty())
except Exception as e:
- print e
- print str(message).encode("hex")
+ print(e)
+ print(str(message).encode("hex"))
client = nfc.handover.HandoverClient(llc)
try:
@@ -217,41 +217,41 @@ def p2p_handover_client(llc):
client.close()
return
- print "Received message"
+ print("Received message")
try:
- print message.pretty()
+ print(message.pretty())
except Exception as e:
- print e
- print str(message).encode("hex")
+ print(e)
+ print(str(message).encode("hex"))
message = nfc.ndef.HandoverSelectMessage(message)
summary("Handover select received")
try:
- print message.pretty()
+ print(message.pretty())
except Exception as e:
- print e
+ print(e)
for carrier in message.carriers:
- print "Remote carrier type: " + carrier.type
+ print("Remote carrier type: " + carrier.type)
if carrier.type == "application/vnd.wfa.p2p":
- print "P2P carrier type match - send to wpa_supplicant"
+ print("P2P carrier type match - send to wpa_supplicant")
if "OK" in wpas_report_handover(data, carrier.record, "INIT"):
success_report("P2P handover reported successfully (initiator)")
else:
summary("P2P handover report rejected")
break
- print "Remove peer"
+ print("Remove peer")
client.close()
- print "Done with handover"
+ print("Done with handover")
global only_one
if only_one:
- print "only_one -> stop loop"
+ print("only_one -> stop loop")
global continue_loop
continue_loop = False
global no_wait
if no_wait:
- print "Trying to exit.."
+ print("Trying to exit..")
global terminate_now
terminate_now = True
@@ -283,33 +283,33 @@ class HandoverServer(nfc.handover.HandoverServer):
def process_request(self, request):
self.ho_server_processing = True
clear_raw_mode()
- print "HandoverServer - request received"
+ print("HandoverServer - request received")
try:
- print "Parsed handover request: " + request.pretty()
+ print("Parsed handover request: " + request.pretty())
except Exception as e:
- print e
+ print(e)
sel = nfc.ndef.HandoverSelectMessage(version="1.2")
found = False
for carrier in request.carriers:
- print "Remote carrier type: " + carrier.type
+ print("Remote carrier type: " + carrier.type)
if carrier.type == "application/vnd.wfa.p2p":
- print "P2P carrier type match - add P2P carrier record"
+ print("P2P carrier type match - add P2P carrier record")
found = True
self.received_carrier = carrier.record
- print "Carrier record:"
+ print("Carrier record:")
try:
- print carrier.record.pretty()
+ print(carrier.record.pretty())
except Exception as e:
- print e
+ print(e)
data = wpas_get_handover_sel()
if data is None:
- print "Could not get handover select carrier record from wpa_supplicant"
+ print("Could not get handover select carrier record from wpa_supplicant")
continue
- print "Handover select carrier record from wpa_supplicant:"
- print data.encode("hex")
+ print("Handover select carrier record from wpa_supplicant:")
+ print(data.encode("hex"))
self.sent_carrier = data
if "OK" in wpas_report_handover(self.received_carrier, self.sent_carrier, "RESP"):
success_report("P2P handover reported successfully (responder)")
@@ -324,22 +324,22 @@ class HandoverServer(nfc.handover.HandoverServer):
for carrier in request.carriers:
if found:
break
- print "Remote carrier type: " + carrier.type
+ print("Remote carrier type: " + carrier.type)
if carrier.type == "application/vnd.wfa.wsc":
- print "WSC carrier type match - add WSC carrier record"
+ print("WSC carrier type match - add WSC carrier record")
found = True
self.received_carrier = carrier.record
- print "Carrier record:"
+ print("Carrier record:")
try:
- print carrier.record.pretty()
+ print(carrier.record.pretty())
except Exception as e:
- print e
+ print(e)
data = wpas_get_handover_sel_wps()
if data is None:
- print "Could not get handover select carrier record from wpa_supplicant"
+ print("Could not get handover select carrier record from wpa_supplicant")
continue
- print "Handover select carrier record from wpa_supplicant:"
- print data.encode("hex")
+ print("Handover select carrier record from wpa_supplicant:")
+ print(data.encode("hex"))
self.sent_carrier = data
if "OK" in wpas_report_handover_wsc(self.received_carrier, self.sent_carrier, "RESP"):
success_report("WSC handover reported successfully")
@@ -352,12 +352,12 @@ class HandoverServer(nfc.handover.HandoverServer):
found = True
break
- print "Handover select:"
+ print("Handover select:")
try:
- print sel.pretty()
+ print(sel.pretty())
except Exception as e:
- print e
- print str(sel).encode("hex")
+ print(e)
+ print(str(sel).encode("hex"))
summary("Sending handover select")
self.success = True
@@ -396,7 +396,7 @@ def p2p_tag_read(tag):
success = False
if len(tag.ndef.message):
for record in tag.ndef.message:
- print "record type " + record.type
+ print("record type " + record.type)
if record.type == "application/vnd.wfa.wsc":
summary("WPS tag - send to wpa_supplicant")
success = wpas_tag_read(tag.ndef.message)
@@ -419,7 +419,7 @@ def rdwr_connected_p2p_write(tag):
global p2p_sel_data
tag.ndef.message = str(p2p_sel_data)
success_report("Tag write succeeded")
- print "Done - remove tag"
+ print("Done - remove tag")
global only_one
if only_one:
global continue_loop
@@ -428,7 +428,7 @@ def rdwr_connected_p2p_write(tag):
return p2p_sel_wait_remove
def wps_write_p2p_handover_sel(clf, wait_remove=True):
- print "Write P2P handover select"
+ print("Write P2P handover select")
data = wpas_get_handover_sel(tag=True)
if (data == None):
summary("Could not get P2P handover select from wpa_supplicant")
@@ -440,14 +440,14 @@ def wps_write_p2p_handover_sel(clf, wait_remove=True):
p2p_sel_data = nfc.ndef.HandoverSelectMessage(version="1.2")
message = nfc.ndef.Message(data);
p2p_sel_data.add_carrier(message[0], "active", message[1:])
- print "Handover select:"
+ print("Handover select:")
try:
- print p2p_sel_data.pretty()
+ print(p2p_sel_data.pretty())
except Exception as e:
- print e
- print str(p2p_sel_data).encode("hex")
+ print(e)
+ print(str(p2p_sel_data).encode("hex"))
- print "Touch an NFC tag"
+ print("Touch an NFC tag")
clf.connect(rdwr={'on-connect': rdwr_connected_p2p_write})
@@ -456,11 +456,11 @@ def rdwr_connected(tag):
summary("Tag connected: " + str(tag))
if tag.ndef:
- print "NDEF tag: " + tag.type
+ print("NDEF tag: " + tag.type)
try:
- print tag.ndef.message.pretty()
+ print(tag.ndef.message.pretty())
except Exception as e:
- print e
+ print(e)
success = p2p_tag_read(tag)
if only_one and success:
global continue_loop
@@ -475,15 +475,15 @@ def rdwr_connected(tag):
def llcp_worker(llc):
global init_on_touch
if init_on_touch:
- print "Starting handover client"
+ print("Starting handover client")
p2p_handover_client(llc)
return
global no_input
if no_input:
- print "Wait for handover to complete"
+ print("Wait for handover to complete")
else:
- print "Wait for handover to complete - press 'i' to initiate ('w' for WPS only, 'p' for P2P only)"
+ print("Wait for handover to complete - press 'i' to initiate ('w' for WPS only, 'p' for P2P only)")
global srv
global wait_connection
while not wait_connection and srv.sent_carrier is None:
@@ -506,21 +506,21 @@ def llcp_worker(llc):
else:
continue
clear_raw_mode()
- print "Starting handover client"
+ print("Starting handover client")
p2p_handover_client(llc)
return
clear_raw_mode()
- print "Exiting llcp_worker thread"
+ print("Exiting llcp_worker thread")
def llcp_startup(clf, llc):
- print "Start LLCP server"
+ print("Start LLCP server")
global srv
srv = HandoverServer(llc)
return llc
def llcp_connected(llc):
- print "P2P LLCP connected"
+ print("P2P LLCP connected")
global wait_connection
wait_connection = False
global init_on_touch
@@ -587,7 +587,7 @@ def main():
if args.ifname:
global ifname
ifname = args.ifname
- print "Selected ifname " + ifname
+ print("Selected ifname " + ifname)
if args.no_wps_req:
global include_wps_req
@@ -610,7 +610,7 @@ def main():
try:
if not clf.open("usb"):
- print "Could not open connection with an NFC device"
+ print("Could not open connection with an NFC device")
raise SystemExit
if args.command == "write-p2p-sel":
@@ -619,7 +619,7 @@ def main():
global continue_loop
while continue_loop:
- print "Waiting for a tag or peer to be touched"
+ print("Waiting for a tag or peer to be touched")
wait_connection = True
try:
if args.tag_read_only:
@@ -637,7 +637,7 @@ def main():
terminate=terminate_loop):
break
except Exception as e:
- print "clf.connect failed"
+ print("clf.connect failed")
global srv
if only_one and srv and srv.success:
@@ -13,40 +13,40 @@ from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> -m <wps_method> \ " \
- % sys.argv[0]
- print " -a <addr> [-p <pin>] [-g <go_intent>] \ "
- print " [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -m = wps method"
- print " -a = peer address"
- print " -p = pin number (8 digits)"
- print " -g = group owner intent"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i wlan0 -a 0015008352c0 -m display -p 12345670" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> -m <wps_method> \ " \
+ % sys.argv[0])
+ print(" -a <addr> [-p <pin>] [-g <go_intent>] \ ")
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -m = wps method")
+ print(" -a = peer address")
+ print(" -p = pin number (8 digits)")
+ print(" -g = group owner intent")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0 -a 0015008352c0 -m display -p 12345670" % sys.argv[0])
# Required Signals
def GONegotiationSuccess(status):
- print "Go Negotiation Success"
+ print("Go Negotiation Success")
def GONegotiationFailure(status):
- print 'Go Negotiation Failed. Status:'
- print format(status)
+ print('Go Negotiation Failed. Status:')
+ print(format(status))
os._exit(0)
def GroupStarted(properties):
if properties.has_key("group_object"):
- print 'Group Formation Complete %s' \
- % properties["group_object"]
+ print('Group Formation Complete %s' \
+ % properties["group_object"])
os._exit(0)
def WpsFailure(status, etc):
- print "WPS Authentication Failure".format(status)
- print etc
+ print("WPS Authentication Failure".format(status))
+ print(etc)
os._exit(0)
class P2P_Connect():
@@ -157,12 +157,12 @@ class P2P_Connect():
if (self.pin != None):
self.p2p_connect_arguements.update({'pin':self.pin})
else:
- print "Error:\n Pin required for wps_method=display"
+ print("Error:\n Pin required for wps_method=display")
usage()
quit()
if (self.go_intent != None and int(self.go_intent) != 15):
- print "go_intent overwritten to 15"
+ print("go_intent overwritten to 15")
self.go_intent = '15'
@@ -171,14 +171,14 @@ class P2P_Connect():
if (self.pin != None):
self.p2p_connect_arguements.update({'pin':self.pin})
else:
- print "Error:\n Pin required for wps_method=keypad"
+ print("Error:\n Pin required for wps_method=keypad")
usage()
quit()
if (self.go_intent != None and int(self.go_intent) == 15):
error = "Error :\n Group Owner intent cannot be" + \
" 15 for wps_method=keypad"
- print error
+ print(error)
usage()
quit()
@@ -186,15 +186,15 @@ class P2P_Connect():
# for ./wpa_cli, p2p_connect [mac] [pin#], wps_method=keypad
elif (self.wps_method == 'pin'):
if (self.pin != None):
- print "pin ignored"
+ print("pin ignored")
# No pin is required for pbc so it is ignored
elif (self.wps_method == 'pbc'):
if (self.pin != None):
- print "pin ignored"
+ print("pin ignored")
else:
- print "Error:\n wps_method not supported or does not exist"
+ print("Error:\n wps_method not supported or does not exist")
usage()
quit()
@@ -214,7 +214,7 @@ class P2P_Connect():
if (self.wps_method == 'pin' and \
not self.p2p_connect_arguements.has_key('pin') ):
- print "Connect return with pin value of %d " % int(result_pin)
+ print("Connect return with pin value of %d " % int(result_pin))
gobject.MainLoop().run()
if __name__ == "__main__":
@@ -268,19 +268,19 @@ if __name__ == "__main__":
# Required Arguements check
if (interface_name == None or wps_method == None or addr == None):
- print "Error:\n Required arguements not specified"
+ print("Error:\n Required arguements not specified")
usage()
quit()
# Group Owner Intent Check
if (go_intent != None and (int(go_intent) > 15 or int(go_intent) < 0) ):
- print "Error:\n Group Owner Intent must be between 0 and 15 inclusive"
+ print("Error:\n Group Owner Intent must be between 0 and 15 inclusive")
usage()
quit()
# Pin Check
if (pin != None and len(pin) != 8):
- print "Error:\n Pin is not 8 digits"
+ print("Error:\n Pin is not 8 digits")
usage()
quit()
@@ -289,7 +289,7 @@ if __name__ == "__main__":
addr,pin,wps_method,go_intent)
except:
- print "Error:\n Invalid Arguements"
+ print("Error:\n Invalid Arguements")
usage()
quit()
@@ -12,19 +12,19 @@ import getopt
from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> \ " \
- % sys.argv[0]
- print " [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i p2p-wlan0-0" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i p2p-wlan0-0" % sys.argv[0])
# Required Signals
def GroupFinished(status, etc):
- print "Disconnected"
+ print("Disconnected")
os._exit(0)
class P2P_Disconnect (threading.Thread):
@@ -84,7 +84,7 @@ class P2P_Disconnect (threading.Thread):
except dbus.DBusException as exc:
error = 'Error:\n Interface ' + self.interface_name \
+ ' was not found'
- print error
+ print(error)
usage()
os._exit(0)
@@ -142,7 +142,7 @@ if __name__ == "__main__":
# Interface name is required and was not given
if (interface_name == None):
- print "Error:\n interface_name is required"
+ print("Error:\n interface_name is required")
usage()
quit()
@@ -152,7 +152,7 @@ if __name__ == "__main__":
wpas_dbus_interface,timeout)
except:
- print "Error:\n Invalid wpas_dbus_interface"
+ print("Error:\n Invalid wpas_dbus_interface")
usage()
quit()
@@ -165,5 +165,5 @@ if __name__ == "__main__":
except:
pass
- print "Disconnect timed out"
+ print("Disconnect timed out")
quit()
@@ -13,23 +13,23 @@ import getopt
from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> [-t <timeout>] \ " \
- % sys.argv[0]
- print " [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -t = timeout = 0s (infinite)"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i wlan0 -t 10" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> [-t <timeout>] \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -t = timeout = 0s (infinite)")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0 -t 10" % sys.argv[0])
# Required Signals
def deviceFound(devicepath):
- print "Device found: %s" % (devicepath)
+ print("Device found: %s" % (devicepath))
def deviceLost(devicepath):
- print "Device lost: %s" % (devicepath)
+ print("Device lost: %s" % (devicepath))
class P2P_Find (threading.Thread):
# Needed Variables
@@ -88,7 +88,7 @@ class P2P_Find (threading.Thread):
except dbus.DBusException as exc:
error = 'Error:\n Interface ' + self.interface_name \
+ ' was not found'
- print error
+ print(error)
usage()
os._exit(0)
@@ -150,7 +150,7 @@ if __name__ == "__main__":
if ( int(value) >= 0):
timeout = value
else:
- print "Error:\n Timeout cannot be negative"
+ print("Error:\n Timeout cannot be negative")
usage()
quit()
# Dbus interface
@@ -161,7 +161,7 @@ if __name__ == "__main__":
# Interface name is required and was not given
if (interface_name == None):
- print "Error:\n interface_name is required"
+ print("Error:\n interface_name is required")
usage()
quit()
@@ -170,7 +170,7 @@ if __name__ == "__main__":
p2p_find_test = P2P_Find(interface_name, wpas_dbus_interface, timeout)
except:
- print "Error:\n Invalid wpas_dbus_interface"
+ print("Error:\n Invalid wpas_dbus_interface")
usage()
quit()
@@ -13,19 +13,19 @@ import getopt
from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> \ " \
- % sys.argv[0]
- print " [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i wlan0" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0" % sys.argv[0])
# Required Signals\
def deviceLost(devicepath):
- print "Device lost: %s" % (devicepath)
+ print("Device lost: %s" % (devicepath))
class P2P_Flush (threading.Thread):
# Needed Variables
@@ -84,7 +84,7 @@ class P2P_Flush (threading.Thread):
except dbus.DBusException as exc:
error = 'Error:\n Interface ' + self.interface_name \
+ ' was not found'
- print error
+ print(error)
usage()
os._exit(0)
@@ -142,7 +142,7 @@ if __name__ == "__main__":
# Interface name is required and was not given
if (interface_name == None):
- print "Error:\n interface_name is required"
+ print("Error:\n interface_name is required")
usage()
quit()
@@ -151,7 +151,7 @@ if __name__ == "__main__":
p2p_flush_test = P2P_Flush(interface_name, wpas_dbus_interface,timeout)
except:
- print "Error:\n Invalid wpas_dbus_interface"
+ print("Error:\n Invalid wpas_dbus_interface")
usage()
quit()
@@ -164,5 +164,5 @@ if __name__ == "__main__":
except:
pass
- print "p2p_flush complete"
+ print("p2p_flush complete")
quit()
@@ -11,30 +11,30 @@ import threading
from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> [-p <persistent>] \ " \
- % sys.argv[0]
- print " [-f <frequency>] [-o <group_object_path>] \ "
- print " [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -p = persistant group = 0 (0=false, 1=true)"
- print " -f = frequency"
- print " -o = persistent group object path"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i wlan0" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> [-p <persistent>] \ " \
+ % sys.argv[0])
+ print(" [-f <frequency>] [-o <group_object_path>] \ ")
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -p = persistant group = 0 (0=false, 1=true)")
+ print(" -f = frequency")
+ print(" -o = persistent group object path")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0" % sys.argv[0])
# Required Signals
def GroupStarted(properties):
if properties.has_key("group_object"):
- print 'Group Formation Complete %s' \
- % properties["group_object"]
+ print('Group Formation Complete %s' \
+ % properties["group_object"])
os._exit(0)
def WpsFailure(status, etc):
- print "WPS Authentication Failure".format(status)
- print etc
+ print("WPS Authentication Failure".format(status))
+ print(etc)
os._exit(0)
class P2P_Group_Add (threading.Thread):
@@ -102,7 +102,7 @@ class P2P_Group_Add (threading.Thread):
except dbus.DBusException as exc:
error = 'Error:\n Interface ' + self.interface_name \
+ ' was not found'
- print error
+ print(error)
usage()
os._exit(0)
@@ -127,7 +127,7 @@ class P2P_Group_Add (threading.Thread):
if (int(self.frequency) > 0):
self.P2PDictionary.update({'frequency':int(self.frequency)})
else:
- print "Error:\n Frequency must be greater than 0"
+ print("Error:\n Frequency must be greater than 0")
usage()
os._exit(0)
@@ -141,7 +141,7 @@ class P2P_Group_Add (threading.Thread):
self.p2p_interface.GroupAdd(self.P2PDictionary)
except:
- print "Error:\n Could not preform group add"
+ print("Error:\n Could not preform group add")
usage()
os._exit(0)
@@ -188,7 +188,7 @@ if __name__ == "__main__":
elif (value == '1'):
persistent = True
else:
- print "Error:\n Persistent can only be 1 or 0"
+ print("Error:\n Persistent can only be 1 or 0")
usage()
os._exit(0)
# Frequency
@@ -205,7 +205,7 @@ if __name__ == "__main__":
# Interface name is required and was not given
if (interface_name == None):
- print "Error:\n interface_name is required"
+ print("Error:\n interface_name is required")
usage()
quit()
@@ -213,10 +213,10 @@ if __name__ == "__main__":
p2p_group_add_test = P2P_Group_Add(interface_name,wpas_dbus_interface,
persistent,frequency,persistent_group_object)
except:
- print "Error:\n Invalid Arguements"
+ print("Error:\n Invalid Arguements")
p2p_group_add_test.constructArguements()
p2p_group_add_test.start()
time.sleep(5)
- print "Error:\n Group formation timed out"
+ print("Error:\n Group formation timed out")
os._exit(0)
@@ -11,29 +11,29 @@ import threading
from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> -a <addr> \ " \
- % sys.argv[0]
- print " [-o <persistent_group_object>] [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -a = address of peer"
- print " -o = persistent group object path"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i p2p-wlan0-0 -a 00150083523c" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> -a <addr> \ " \
+ % sys.argv[0])
+ print(" [-o <persistent_group_object>] [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -a = address of peer")
+ print(" -o = persistent group object path")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i p2p-wlan0-0 -a 00150083523c" % sys.argv[0])
# Required Signals
def InvitationResult(invite_result):
- print "Inviation Result signal :"
+ print("Inviation Result signal :")
status = invite_result['status']
- print "status = ", status
+ print("status = ", status)
if invite_result.has_key('BSSID'):
bssid = invite_result['BSSID']
- print "BSSID = ", hex(bssid[0]) , ":" , \
+ print("BSSID = ", hex(bssid[0]) , ":" , \
hex(bssid[1]) , ":" , hex(bssid[2]) , ":", \
hex(bssid[3]) , ":" , hex(bssid[4]) , ":" , \
- hex(bssid[5])
+ hex(bssid[5]))
os._exit(0)
class P2P_Invite (threading.Thread):
@@ -99,7 +99,7 @@ class P2P_Invite (threading.Thread):
except dbus.DBusException as exc:
error = 'Error:\n Interface ' + self.interface_name \
+ ' was not found'
- print error
+ print(error)
usage()
os._exit(0)
@@ -127,7 +127,7 @@ class P2P_Invite (threading.Thread):
self.p2p_interface.Invite(self.P2PDictionary)
except:
- print "Error:\n Invalid Arguements"
+ print("Error:\n Invalid Arguements")
usage()
os._exit(0)
@@ -176,12 +176,12 @@ if __name__ == "__main__":
# Interface name is required and was not given
if (interface_name == None):
- print "Error:\n interface_name is required"
+ print("Error:\n interface_name is required")
usage()
quit()
if (addr == None):
- print "Error:\n peer address is required"
+ print("Error:\n peer address is required")
usage()
quit()
@@ -190,12 +190,12 @@ if __name__ == "__main__":
P2P_Invite(interface_name,wpas_dbus_interface,
addr,persistent_group_object)
except:
- print "Error:\n Invalid Arguements"
+ print("Error:\n Invalid Arguements")
usage()
os._exit(1)
p2p_invite_test.constructArguements()
p2p_invite_test.start()
time.sleep(10)
- print "Error:\n p2p_invite timed out"
+ print("Error:\n p2p_invite timed out")
os._exit(0)
@@ -13,20 +13,20 @@ import getopt
from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> [-t <timeout>] \ " \
- % sys.argv[0]
- print " [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -t = timeout = 0s (infinite)"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i wlan0 -t 5" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> [-t <timeout>] \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -t = timeout = 0s (infinite)")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0 -t 5" % sys.argv[0])
# Required Signals
def p2pStateChange(status):
- print status
+ print(status)
class P2P_Listen(threading.Thread):
# Needed Variables
@@ -85,7 +85,7 @@ class P2P_Listen(threading.Thread):
except dbus.DBusException as exc:
error = 'Error:\n Interface ' + self.interface_name \
+ ' was not found'
- print error
+ print(error)
usage()
os._exit(0)
@@ -140,7 +140,7 @@ if __name__ == "__main__":
if ( int(value) >= 0):
timeout = value
else:
- print "Error:\n Timeout cannot be negative"
+ print("Error:\n Timeout cannot be negative")
usage()
quit()
# Dbus interface
@@ -151,7 +151,7 @@ if __name__ == "__main__":
# Interface name is required and was not given
if (interface_name == None):
- print "Error:\n interface_name is required"
+ print("Error:\n interface_name is required")
usage()
quit()
@@ -160,7 +160,7 @@ if __name__ == "__main__":
p2p_listen_test = P2P_Listen(interface_name, wpas_dbus_interface, timeout)
except:
- print "Error:\n Invalid wpas_dbus_interface"
+ print("Error:\n Invalid wpas_dbus_interface")
usage()
quit()
@@ -11,22 +11,22 @@ import getopt
from dbus.mainloop.glib import DBusGMainLoop
def usage():
- print "Usage:"
- print " %s -i <interface_name> \ " \
- % sys.argv[0]
- print " [-w <wpas_dbus_interface>]"
- print "Options:"
- print " -i = interface name"
- print " -w = wpas dbus interface = fi.w1.wpa_supplicant1"
- print "Example:"
- print " %s -i wlan0" % sys.argv[0]
+ print("Usage:")
+ print(" %s -i <interface_name> \ " \
+ % sys.argv[0])
+ print(" [-w <wpas_dbus_interface>]")
+ print("Options:")
+ print(" -i = interface name")
+ print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
+ print("Example:")
+ print(" %s -i wlan0" % sys.argv[0])
# Required Signals
def deviceLost(devicepath):
- print "Device lost: %s" % (devicepath)
+ print("Device lost: %s" % (devicepath))
def p2pStateChange(status):
- print status
+ print(status)
os._exit(0)
class P2P_Stop_Find (threading.Thread):
@@ -86,7 +86,7 @@ class P2P_Stop_Find (threading.Thread):
except dbus.DBusException as exc:
error = 'Error:\n Interface ' + self.interface_name \
+ ' was not found'
- print error
+ print(error)
usage()
os._exit(0)
@@ -147,7 +147,7 @@ if __name__ == "__main__":
# Interface name is required and was not given
if (interface_name == None):
- print "Error:\n interface_name is required"
+ print("Error:\n interface_name is required")
usage()
quit()
@@ -157,7 +157,7 @@ if __name__ == "__main__":
wpas_dbus_interface,timeout)
except:
- print "Error:\n Invalid wpas_dbus_interface"
+ print("Error:\n Invalid wpas_dbus_interface")
usage()
quit()
@@ -170,5 +170,5 @@ if __name__ == "__main__":
except:
pass
- print "p2p find stopped"
+ print("p2p find stopped")
quit()
@@ -11,8 +11,8 @@ def main():
"/fi/w1/wpa_supplicant1")
props = wpas_obj.GetAll("fi.w1.wpa_supplicant1",
dbus_interface=dbus.PROPERTIES_IFACE)
- print "GetAll(fi.w1.wpa_supplicant1, /fi/w1/wpa_supplicant1):"
- print props
+ print("GetAll(fi.w1.wpa_supplicant1, /fi/w1/wpa_supplicant1):")
+ print(props)
if len(sys.argv) != 2:
os._exit(1)
@@ -24,15 +24,15 @@ def main():
if_obj = bus.get_object("fi.w1.wpa_supplicant1", path)
props = if_obj.GetAll("fi.w1.wpa_supplicant1.Interface",
dbus_interface=dbus.PROPERTIES_IFACE)
- print
- print "GetAll(fi.w1.wpa_supplicant1.Interface, %s):" % (path)
- print props
+ print()
+ print("GetAll(fi.w1.wpa_supplicant1.Interface, %s):" % (path))
+ print(props)
props = if_obj.GetAll("fi.w1.wpa_supplicant1.Interface.WPS",
dbus_interface=dbus.PROPERTIES_IFACE)
- print
- print "GetAll(fi.w1.wpa_supplicant1.Interface.WPS, %s):" % (path)
- print props
+ print()
+ print("GetAll(fi.w1.wpa_supplicant1.Interface.WPS, %s):" % (path))
+ print(props)
res = if_obj.Get("fi.w1.wpa_supplicant1.Interface", 'BSSs',
dbus_interface=dbus.PROPERTIES_IFACE)
@@ -40,9 +40,9 @@ def main():
bss_obj = bus.get_object("fi.w1.wpa_supplicant1", res[0])
props = bss_obj.GetAll("fi.w1.wpa_supplicant1.BSS",
dbus_interface=dbus.PROPERTIES_IFACE)
- print
- print "GetAll(fi.w1.wpa_supplicant1.BSS, %s):" % (res[0])
- print props
+ print()
+ print("GetAll(fi.w1.wpa_supplicant1.BSS, %s):" % (res[0]))
+ print(props)
res = if_obj.Get("fi.w1.wpa_supplicant1.Interface", 'Networks',
dbus_interface=dbus.PROPERTIES_IFACE)
@@ -50,9 +50,9 @@ def main():
net_obj = bus.get_object("fi.w1.wpa_supplicant1", res[0])
props = net_obj.GetAll("fi.w1.wpa_supplicant1.Network",
dbus_interface=dbus.PROPERTIES_IFACE)
- print
- print "GetAll(fi.w1.wpa_supplicant1.Network, %s):" % (res[0])
- print props
+ print()
+ print("GetAll(fi.w1.wpa_supplicant1.Network, %s):" % (res[0]))
+ print(props)
if __name__ == "__main__":
main()
@@ -32,17 +32,17 @@ def list_interfaces(wpas_obj):
if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
ifname = if_obj.Get(WPAS_DBUS_INTERFACES_INTERFACE, 'Ifname',
dbus_interface=dbus.PROPERTIES_IFACE)
- print ifname
+ print(ifname)
def interfaceAdded(interface, properties):
- print "InterfaceAdded(%s): Ifname=%s" % (interface, properties['Ifname'])
+ print("InterfaceAdded(%s): Ifname=%s" % (interface, properties['Ifname']))
def interfaceRemoved(interface):
- print "InterfaceRemoved(%s)" % (interface)
+ print("InterfaceRemoved(%s)" % (interface))
def propertiesChanged(properties):
for i in properties:
- print "PropertiesChanged: %s=%s" % (i, properties[i])
+ print("PropertiesChanged: %s=%s" % (i, properties[i]))
def showBss(bss):
net_obj = bus.get_object(WPAS_DBUS_SERVICE, bss)
@@ -80,48 +80,48 @@ def showBss(bss):
else:
maxrate = 0
- print " %s :: ssid='%s' wpa=%s wpa2=%s signal=%d rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq)
+ print(" %s :: ssid='%s' wpa=%s wpa2=%s signal=%d rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq))
def scanDone(success):
gobject.MainLoop().quit()
- print "Scan done: success=%s" % success
+ print("Scan done: success=%s" % success)
def scanDone2(success, path=None):
- print "Scan done: success=%s [path=%s]" % (success, path)
+ print("Scan done: success=%s [path=%s]" % (success, path))
def bssAdded(bss, properties):
- print "BSS added: %s" % (bss)
+ print("BSS added: %s" % (bss))
showBss(bss)
def bssRemoved(bss):
- print "BSS removed: %s" % (bss)
+ print("BSS removed: %s" % (bss))
def blobAdded(blob):
- print "BlobAdded(%s)" % (blob)
+ print("BlobAdded(%s)" % (blob))
def blobRemoved(blob):
- print "BlobRemoved(%s)" % (blob)
+ print("BlobRemoved(%s)" % (blob))
def networkAdded(network, properties):
- print "NetworkAdded(%s)" % (network)
+ print("NetworkAdded(%s)" % (network))
def networkRemoved(network):
- print "NetworkRemoved(%s)" % (network)
+ print("NetworkRemoved(%s)" % (network))
def networkSelected(network):
- print "NetworkSelected(%s)" % (network)
+ print("NetworkSelected(%s)" % (network))
def propertiesChangedInterface(properties):
for i in properties:
- print "PropertiesChanged(interface): %s=%s" % (i, properties[i])
+ print("PropertiesChanged(interface): %s=%s" % (i, properties[i]))
def propertiesChangedBss(properties):
for i in properties:
- print "PropertiesChanged(BSS): %s=%s" % (i, properties[i])
+ print("PropertiesChanged(BSS): %s=%s" % (i, properties[i]))
def propertiesChangedNetwork(properties):
for i in properties:
- print "PropertiesChanged(Network): %s=%s" % (i, properties[i])
+ print("PropertiesChanged(Network): %s=%s" % (i, properties[i]))
def main():
dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
@@ -15,23 +15,23 @@ WPAS_DBUS_WPS_INTERFACE = "fi.w1.wpa_supplicant1.Interface.WPS"
def propertiesChanged(properties):
if properties.has_key("State"):
- print "PropertiesChanged: State: %s" % (properties["State"])
+ print("PropertiesChanged: State: %s" % (properties["State"]))
def scanDone(success):
- print "Scan done: success=%s" % success
+ print("Scan done: success=%s" % success)
def bssAdded(bss, properties):
- print "BSS added: %s" % (bss)
+ print("BSS added: %s" % (bss))
def bssRemoved(bss):
- print "BSS removed: %s" % (bss)
+ print("BSS removed: %s" % (bss))
def wpsEvent(name, args):
- print "WPS event: %s" % (name)
- print args
+ print("WPS event: %s" % (name))
+ print(args)
def credentials(cred):
- print "WPS credentials: %s" % (cred)
+ print("WPS credentials: %s" % (cred))
def main():
dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
@@ -40,7 +40,7 @@ def main():
wpas_obj = bus.get_object(WPAS_DBUS_SERVICE, WPAS_DBUS_OPATH)
if len(sys.argv) != 2:
- print "Missing ifname argument"
+ print("Missing ifname argument")
os._exit(1)
wpas = dbus.Interface(wpas_obj, WPAS_DBUS_INTERFACE)
@@ -31,11 +31,11 @@ def list_interfaces(wpas_obj):
if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
ifname = if_obj.Get(WPAS_DBUS_INTERFACES_INTERFACE, 'Ifname',
dbus_interface=dbus.PROPERTIES_IFACE)
- print ifname
+ print(ifname)
def propertiesChanged(properties):
if properties.has_key("State"):
- print "PropertiesChanged: State: %s" % (properties["State"])
+ print("PropertiesChanged: State: %s" % (properties["State"]))
def showBss(bss):
net_obj = bus.get_object(WPAS_DBUS_SERVICE, bss)
@@ -73,25 +73,25 @@ def showBss(bss):
else:
maxrate = 0
- print " %s :: ssid='%s' wpa=%s wpa2=%s signal=%d rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq)
+ print(" %s :: ssid='%s' wpa=%s wpa2=%s signal=%d rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq))
def scanDone(success):
- print "Scan done: success=%s" % success
+ print("Scan done: success=%s" % success)
res = if_obj.Get(WPAS_DBUS_INTERFACES_INTERFACE, 'BSSs',
dbus_interface=dbus.PROPERTIES_IFACE)
- print "Scanned wireless networks:"
+ print("Scanned wireless networks:")
for opath in res:
- print opath
+ print(opath)
showBss(opath)
def bssAdded(bss, properties):
- print "BSS added: %s" % (bss)
+ print("BSS added: %s" % (bss))
showBss(bss)
def bssRemoved(bss):
- print "BSS removed: %s" % (bss)
+ print("BSS removed: %s" % (bss))
def main():
dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
@@ -24,7 +24,7 @@ def byte_array_to_string(s):
def main():
if len(sys.argv) != 2:
- print "Usage: wpas-test.py <interface>"
+ print("Usage: wpas-test.py <interface>")
os._exit(1)
ifname = sys.argv[1]
@@ -53,7 +53,7 @@ def main():
time.sleep(5)
res = iface.scanResults()
- print "Scanned wireless networks:"
+ print("Scanned wireless networks:")
for opath in res:
net_obj = bus.get_object(WPAS_DBUS_SERVICE, opath)
net = dbus.Interface(net_obj, WPAS_DBUS_BSSID_INTERFACE)
@@ -80,7 +80,7 @@ def main():
noise = props["noise"]
maxrate = props["maxrate"] / 1000000
- print " %s :: ssid='%s' wpa=%s wpa2=%s quality=%d%% rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, qual, maxrate, freq)
+ print(" %s :: ssid='%s' wpa=%s wpa2=%s quality=%d%% rate=%d freq=%d" % (bssid, ssid, wpa, wpa2, qual, maxrate, freq))
wpas.removeInterface(dbus.ObjectPath(path))
# Should fail here with unknown interface error
@@ -30,7 +30,7 @@ summary_file = None
success_file = None
def summary(txt):
- print txt
+ print(txt)
if summary_file:
with open(summary_file, 'a') as f:
f.write(txt + "\n")
@@ -47,11 +47,11 @@ def wpas_connect():
try:
ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
except OSError as error:
- print "Could not find wpa_supplicant: ", error
+ print("Could not find wpa_supplicant: ", error)
return None
if len(ifaces) < 1:
- print "No wpa_supplicant control interface found"
+ print("No wpa_supplicant control interface found")
return None
for ctrl in ifaces:
@@ -163,22 +163,22 @@ class HandoverServer(nfc.handover.HandoverServer):
self.ho_server_processing = True
summary("HandoverServer - request received")
try:
- print "Parsed handover request: " + request.pretty()
+ print("Parsed handover request: " + request.pretty())
except Exception as e:
- print e
+ print(e)
sel = nfc.ndef.HandoverSelectMessage(version="1.2")
for carrier in request.carriers:
- print "Remote carrier type: " + carrier.type
+ print("Remote carrier type: " + carrier.type)
if carrier.type == "application/vnd.wfa.wsc":
summary("WPS carrier type match - add WPS carrier record")
data = wpas_get_handover_sel(self.uuid)
if data is None:
summary("Could not get handover select carrier record from wpa_supplicant")
continue
- print "Handover select carrier record from wpa_supplicant:"
- print data.encode("hex")
+ print("Handover select carrier record from wpa_supplicant:")
+ print(data.encode("hex"))
self.sent_carrier = data
if "OK" in wpas_report_handover(carrier.record, self.sent_carrier, "RESP"):
success_report("Handover reported successfully (responder)")
@@ -188,12 +188,12 @@ class HandoverServer(nfc.handover.HandoverServer):
message = nfc.ndef.Message(data);
sel.add_carrier(message[0], "active", message[1:])
- print "Handover select:"
+ print("Handover select:")
try:
- print sel.pretty()
+ print(sel.pretty())
except Exception as e:
- print e
- print str(sel).encode("hex")
+ print(e)
+ print(str(sel).encode("hex"))
summary("Sending handover select")
self.success = True
@@ -207,19 +207,19 @@ def wps_handover_init(llc):
if (data == None):
summary("Could not get handover request carrier record from wpa_supplicant")
return
- print "Handover request carrier record from wpa_supplicant: " + data.encode("hex")
+ print("Handover request carrier record from wpa_supplicant: " + data.encode("hex"))
message = nfc.ndef.HandoverRequestMessage(version="1.2")
message.nonce = random.randint(0, 0xffff)
datamsg = nfc.ndef.Message(data)
message.add_carrier(datamsg[0], "active", datamsg[1:])
- print "Handover request:"
+ print("Handover request:")
try:
- print message.pretty()
+ print(message.pretty())
except Exception as e:
- print e
- print str(message).encode("hex")
+ print(e)
+ print(str(message).encode("hex"))
client = nfc.handover.HandoverClient(llc)
try:
@@ -253,23 +253,23 @@ def wps_handover_init(llc):
client.close()
return
- print "Received message"
+ print("Received message")
try:
- print message.pretty()
+ print(message.pretty())
except Exception as e:
- print e
- print str(message).encode("hex")
+ print(e)
+ print(str(message).encode("hex"))
message = nfc.ndef.HandoverSelectMessage(message)
summary("Handover select received")
try:
- print message.pretty()
+ print(message.pretty())
except Exception as e:
- print e
+ print(e)
for carrier in message.carriers:
- print "Remote carrier type: " + carrier.type
+ print("Remote carrier type: " + carrier.type)
if carrier.type == "application/vnd.wfa.wsc":
- print "WPS carrier type match - send to wpa_supplicant"
+ print("WPS carrier type match - send to wpa_supplicant")
if "OK" in wpas_report_handover(data, carrier.record, "INIT"):
success_report("Handover reported successfully (initiator)")
else:
@@ -278,9 +278,9 @@ def wps_handover_init(llc):
#wifi = nfc.ndef.WifiConfigRecord(carrier.record)
#print wifi.pretty()
- print "Remove peer"
+ print("Remove peer")
client.close()
- print "Done with handover"
+ print("Done with handover")
global only_one
if only_one:
global continue_loop
@@ -288,7 +288,7 @@ def wps_handover_init(llc):
global no_wait
if no_wait:
- print "Trying to exit.."
+ print("Trying to exit..")
global terminate_now
terminate_now = True
@@ -296,7 +296,7 @@ def wps_tag_read(tag, wait_remove=True):
success = False
if len(tag.ndef.message):
for record in tag.ndef.message:
- print "record type " + record.type
+ print("record type " + record.type)
if record.type == "application/vnd.wfa.wsc":
summary("WPS tag - send to wpa_supplicant")
success = wpas_tag_read(tag.ndef.message)
@@ -308,7 +308,7 @@ def wps_tag_read(tag, wait_remove=True):
success_report("Tag read succeeded")
if wait_remove:
- print "Remove tag"
+ print("Remove tag")
while tag.is_present:
time.sleep(0.1)
@@ -320,7 +320,7 @@ def rdwr_connected_write(tag):
global write_data
tag.ndef.message = str(write_data)
success_report("Tag write succeeded")
- print "Done - remove tag"
+ print("Done - remove tag")
global only_one
if only_one:
global continue_loop
@@ -330,41 +330,41 @@ def rdwr_connected_write(tag):
time.sleep(0.1)
def wps_write_config_tag(clf, id=None, wait_remove=True):
- print "Write WPS config token"
+ print("Write WPS config token")
global write_data, write_wait_remove
write_wait_remove = wait_remove
write_data = wpas_get_config_token(id)
if write_data == None:
- print "Could not get WPS config token from wpa_supplicant"
+ print("Could not get WPS config token from wpa_supplicant")
sys.exit(1)
return
- print "Touch an NFC tag"
+ print("Touch an NFC tag")
clf.connect(rdwr={'on-connect': rdwr_connected_write})
def wps_write_er_config_tag(clf, uuid, wait_remove=True):
- print "Write WPS ER config token"
+ print("Write WPS ER config token")
global write_data, write_wait_remove
write_wait_remove = wait_remove
write_data = wpas_get_er_config_token(uuid)
if write_data == None:
- print "Could not get WPS config token from wpa_supplicant"
+ print("Could not get WPS config token from wpa_supplicant")
return
- print "Touch an NFC tag"
+ print("Touch an NFC tag")
clf.connect(rdwr={'on-connect': rdwr_connected_write})
def wps_write_password_tag(clf, wait_remove=True):
- print "Write WPS password token"
+ print("Write WPS password token")
global write_data, write_wait_remove
write_wait_remove = wait_remove
write_data = wpas_get_password_token()
if write_data == None:
- print "Could not get WPS password token from wpa_supplicant"
+ print("Could not get WPS password token from wpa_supplicant")
return
- print "Touch an NFC tag"
+ print("Touch an NFC tag")
clf.connect(rdwr={'on-connect': rdwr_connected_write})
@@ -373,11 +373,11 @@ def rdwr_connected(tag):
summary("Tag connected: " + str(tag))
if tag.ndef:
- print "NDEF tag: " + tag.type
+ print("NDEF tag: " + tag.type)
try:
- print tag.ndef.message.pretty()
+ print(tag.ndef.message.pretty())
except Exception as e:
- print e
+ print(e)
success = wps_tag_read(tag, not only_one)
if only_one and success:
global continue_loop
@@ -393,7 +393,7 @@ def llcp_worker(llc):
global arg_uuid
if arg_uuid is None:
wps_handover_init(llc)
- print "Exiting llcp_worker thread"
+ print("Exiting llcp_worker thread")
return
global srv
@@ -405,19 +405,19 @@ def llcp_worker(llc):
def llcp_startup(clf, llc):
global arg_uuid
if arg_uuid:
- print "Start LLCP server"
+ print("Start LLCP server")
global srv
srv = HandoverServer(llc)
if arg_uuid is "ap":
- print "Trying to handle WPS handover"
+ print("Trying to handle WPS handover")
srv.uuid = None
else:
- print "Trying to handle WPS handover with AP " + arg_uuid
+ print("Trying to handle WPS handover with AP " + arg_uuid)
srv.uuid = arg_uuid
return llc
def llcp_connected(llc):
- print "P2P LLCP connected"
+ print("P2P LLCP connected")
global wait_connection
wait_connection = False
global arg_uuid
@@ -426,7 +426,7 @@ def llcp_connected(llc):
srv.start()
else:
threading.Thread(target=llcp_worker, args=(llc,)).start()
- print "llcp_connected returning"
+ print("llcp_connected returning")
return True
@@ -482,7 +482,7 @@ def main():
try:
if not clf.open("usb"):
- print "Could not open connection with an NFC device"
+ print("Could not open connection with an NFC device")
raise SystemExit
if args.command == "write-config":
@@ -499,7 +499,7 @@ def main():
global continue_loop
while continue_loop:
- print "Waiting for a tag or peer to be touched"
+ print("Waiting for a tag or peer to be touched")
wait_connection = True
try:
if not clf.connect(rdwr={'on-connect': rdwr_connected},
@@ -508,7 +508,7 @@ def main():
terminate=terminate_loop):
break
except Exception as e:
- print "clf.connect failed"
+ print("clf.connect failed")
global srv
if only_one and srv and srv.success:
@@ -28,7 +28,7 @@ if __name__ == "__main__":
input = sys.argv[1]
pcap = sys.argv[2]
except IndexError:
- print "Usage: %s <log file> <pcap file>" % sys.argv[0]
+ print("Usage: %s <log file> <pcap file>" % sys.argv[0])
sys.exit(2)
input_file = open(input, 'r')
@@ -21,18 +21,18 @@ def wpas_connect(host=None, port=9877):
wpas = wpaspy.Ctrl(host, port)
return wpas
except:
- print "Could not connect to host: ", host
+ print("Could not connect to host: ", host)
return None
if os.path.isdir(wpas_ctrl):
try:
ifaces = [os.path.join(wpas_ctrl, i) for i in os.listdir(wpas_ctrl)]
except OSError as error:
- print "Could not find wpa_supplicant: ", error
+ print("Could not find wpa_supplicant: ", error)
return None
if len(ifaces) < 1:
- print "No wpa_supplicant control interface found"
+ print("No wpa_supplicant control interface found")
return None
for ctrl in ifaces:
@@ -45,21 +45,21 @@ def wpas_connect(host=None, port=9877):
def main(host=None, port=9877):
- print "Testing wpa_supplicant control interface connection"
+ print("Testing wpa_supplicant control interface connection")
wpas = wpas_connect(host, port)
if wpas is None:
return
- print "Connected to wpa_supplicant"
- print wpas.request('PING')
+ print("Connected to wpa_supplicant")
+ print(wpas.request('PING'))
mon = wpas_connect(host, port)
if mon is None:
- print "Could not open event monitor connection"
+ print("Could not open event monitor connection")
return
mon.attach()
- print "Scan"
- print wpas.request('SCAN')
+ print("Scan")
+ print(wpas.request('SCAN'))
count = 0
while count < 10:
@@ -67,10 +67,10 @@ def main(host=None, port=9877):
time.sleep(1)
while mon.pending():
ev = mon.recv()
- print ev
+ print(ev)
if 'CTRL-EVENT-SCAN-RESULTS' in ev:
- print 'Scan completed'
- print wpas.request('SCAN_RESULTS')
+ print('Scan completed')
+ print(wpas.request('SCAN_RESULTS'))
count = 10
pass
This patch is made by using 2to3 command. $ find . -name *.py | xargs 2to3 -f print -w -n Signed-off-by: Masashi Honma <masashi.honma@gmail.com> --- hostapd/wps-ap-nfc.py | 50 +++---- tests/hwsim/hwsim.py | 6 +- tests/hwsim/rfkill.py | 8 +- tests/hwsim/run-tests.py | 60 ++++---- tests/hwsim/test_ap_hs20.py | 2 +- tests/hwsim/test_ap_wps.py | 2 +- tests/hwsim/test_gas.py | 2 +- tests/hwsim/test_p2p_messages.py | 2 +- tests/hwsim/test_wpas_ctrl.py | 2 +- tests/hwsim/vm/parallel-vm.py | 38 ++--- tests/hwsim/wpasupplicant.py | 2 +- tests/remote/run-tests.py | 20 +-- tests/remote/test_devices.py | 30 ++-- wpa_supplicant/eapol_test.py | 2 +- wpa_supplicant/examples/dbus-listen-preq.py | 16 +- wpa_supplicant/examples/dpp-qrcode.py | 32 ++-- wpa_supplicant/examples/p2p-nfc.py | 140 +++++++++--------- wpa_supplicant/examples/p2p/p2p_connect.py | 66 ++++----- wpa_supplicant/examples/p2p/p2p_disconnect.py | 28 ++-- wpa_supplicant/examples/p2p/p2p_find.py | 32 ++-- wpa_supplicant/examples/p2p/p2p_flush.py | 28 ++-- wpa_supplicant/examples/p2p/p2p_group_add.py | 48 +++--- wpa_supplicant/examples/p2p/p2p_invite.py | 42 +++--- wpa_supplicant/examples/p2p/p2p_listen.py | 30 ++-- wpa_supplicant/examples/p2p/p2p_stop_find.py | 30 ++-- .../examples/wpas-dbus-new-getall.py | 28 ++-- .../examples/wpas-dbus-new-signals.py | 34 ++--- wpa_supplicant/examples/wpas-dbus-new-wps.py | 16 +- wpa_supplicant/examples/wpas-dbus-new.py | 16 +- wpa_supplicant/examples/wpas-test.py | 6 +- wpa_supplicant/examples/wps-nfc.py | 104 ++++++------- wpa_supplicant/utils/log2pcap.py | 2 +- wpaspy/test.py | 24 +-- 33 files changed, 474 insertions(+), 474 deletions(-)