[v2,0/5] Add initial Keem Bay SoC / Board support

Hi,

This patch-set adds initial support for a new Intel Movidius SoC code-named
Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel Movidius VPU.

This initial patch-set enables only the minimal set of components required
to make the Keem Bay EVM board boot into initramfs.

Changes from v1 to v2:
* Moved keembay-scmi-mailbox driver to a separate patchset
* Removed Keem Bay SCMI mailbox and SCMI node from Keem Bay SoC device tree

Regards,
Daniele


Daniele Alessandrelli (5):
  arm64: Add config for Keem Bay SoC
  dt-bindings: arm: Add Keem Bay bindings
  MAINTAINERS: Add maintainers for Keem Bay SoC
  arm64: dts: keembay: Add device tree for Keem Bay SoC
  arm64: dts: keembay: Add device tree for Keem Bay EVM board

 .../devicetree/bindings/arm/keembay.yaml      |  19 ++
 MAINTAINERS                                   |  10 +
 arch/arm64/Kconfig.platforms                  |   5 +
 arch/arm64/boot/dts/intel/Makefile            |   1 +
 arch/arm64/boot/dts/intel/keembay-evm.dts     |  39 ++++
 arch/arm64/boot/dts/intel/keembay-soc.dtsi    | 125 ++++++++++++
 include/dt-bindings/clock/keembay-clocks.h    | 188 ++++++++++++++++++
 include/dt-bindings/power/keembay-power.h     |  19 ++
 8 files changed, 406 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
 create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
 create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
 create mode 100644 include/dt-bindings/clock/keembay-clocks.h
 create mode 100644 include/dt-bindings/power/keembay-power.h

On Wed, Jul 8, 2020 at 7:50 PM Daniele Alessandrelli
<daniele.alessandrelli@linux.intel.com> wrote:
>
> Hi,
>
> This patch-set adds initial support for a new Intel Movidius SoC code-named
> Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel Movidius VPU.
>
> This initial patch-set enables only the minimal set of components required
> to make the Keem Bay EVM board boot into initramfs.
>
> Changes from v1 to v2:
> * Moved keembay-scmi-mailbox driver to a separate patchset
> * Removed Keem Bay SCMI mailbox and SCMI node from Keem Bay SoC device tree

This all looks basically ok, but I noticed that the DT bindings ands
DTS files all have a
"GPL-2.0-only" tag. Usually we make those dual-licensed in order to
make it easier
to distribute them with a non-GPL bootloader and synchronize them between
projects.

Do you know if the GPL-2.0-only part was picked intentionally, or if it can
be changed to dual-licensed?

      Arnd

On Tue, 2020-07-14 at 14:40 +0200, Arnd Bergmann wrote:
> On Wed, Jul 8, 2020 at 7:50 PM Daniele Alessandrelli
> <daniele.alessandrelli@linux.intel.com> wrote:
> > Hi,
> > 
> > This patch-set adds initial support for a new Intel Movidius SoC
> > code-named
> > Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel
> > Movidius VPU.
> > 
> > This initial patch-set enables only the minimal set of components
> > required
> > to make the Keem Bay EVM board boot into initramfs.
> > 
> > Changes from v1 to v2:
> > * Moved keembay-scmi-mailbox driver to a separate patchset
> > * Removed Keem Bay SCMI mailbox and SCMI node from Keem Bay SoC
> > device tree
> 
> This all looks basically ok, but I noticed that the DT bindings ands
> DTS files all have a
> "GPL-2.0-only" tag. Usually we make those dual-licensed in order to
> make it easier
> to distribute them with a non-GPL bootloader and synchronize them
> between
> projects.
> 
> Do you know if the GPL-2.0-only part was picked intentionally, or if
> it can
> be changed to dual-licensed?

Thanks for reviewing the patchset. I'll change those files to dual-
licensed and re-submit.