diff mbox series

[v2,1/2] configs/beaglebone: bump Linux version to 5.10.162-ti-r56

Message ID 20230207082136.90164-1-dario.binacchi@amarulasolutions.com
State Accepted
Headers show
Series [v2,1/2] configs/beaglebone: bump Linux version to 5.10.162-ti-r56 | expand

Commit Message

Dario Binacchi Feb. 7, 2023, 8:21 a.m. UTC 
The previous version failed to boot from sd card with a log reported by
the document [1]. In my case it always failed, a 100% failure against
75% reported by the document.

Instead of adding the patch to fix the problem, I preferred to update
the kernel version.

Tested on beaglebone black.

[1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v2:
- bump version to 5.10.162-ti-r56.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
 configs/beaglebone_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Thomas Petazzoni Feb. 7, 2023, 9:04 a.m. UTC | #1 
On Tue,  7 Feb 2023 09:21:36 +0100
Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:

> The previous version failed to boot from sd card with a log reported by
> the document [1]. In my case it always failed, a 100% failure against
> 75% reported by the document.
> 
> Instead of adding the patch to fix the problem, I preferred to update
> the kernel version.
> 
> Tested on beaglebone black.
> 
> [1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> 
> ---

Applied to master, thanks. However, when you send a v2, please always
resend the full series, otherwise it's very confusing for us on the
maintainer side to figure out where are the other patches of the same
series.

Thanks a lot!

Thomas
diff mbox series

Patch

diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
index 639b491e9746..3ce5721265c3 100644
--- a/configs/beaglebone_defconfig
+++ b/configs/beaglebone_defconfig
@@ -20,7 +20,7 @@  BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglebone/genimage.cfg"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,5.10.30-ti-r3)/linux-5.10.30-ti-r3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,5.10.162-ti-r56)/linux-5.10.162-ti-r56.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk am335x-boneblue am335x-boneblack-wireless am335x-bonegreen-wireless"