| Message ID | 20220213220116.144141-1-thomas.petazzoni@bootlin.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | package/gdb: bump 11.x version to 11.2 | expand |
On 13/02/2022 23:01, Thomas Petazzoni via buildroot wrote: > This is a minor corrective release over GDB 11.1, fixing the following issues: > > PR sim/28302 (gdb fails to build with glibc 2.34) > PR build/28318 (std::thread support configure check does not use > CXX_DIALECT) > PR gdb/28405 (arm-none-eabi: internal-error: ptid_t > remote_target::select_thread_for_ambiguous_stop_reply(const > target_waitstatus*): Assertion `first_resumed_thread != nullptr' > failed) > PR tui/28483 ([gdb/tui] breakpoint creation not displayed) > PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) > PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) > PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) > PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) > > Drop patch 0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch, which was > merged upstream as commit 17d6f2152b583cdc7defafa7813b727a304bac5b. > > Drop patch 0008-Fix-build-on-rhES5.patch, which was merged upstream as > commit df9ebc472a162306dee8ba6e02b99963c2babb7c? > > Drop patch 0009-gdbserver-aarch64-support.patch, which was merged > upstream as commit eb79b2318066cafb75ffdce310e3bbd44f7c79e3. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Bugfix bump, so applied to master, thanks. Regards, Arnout > --- > ...sim-filter-out-SIGSTKSZ-PR-sim-28302.patch | 110 ------ > .../gdb/11.1/0008-Fix-build-on-rhES5.patch | 194 ----------- > .../11.1/0010-gdbserver-aarch64-support.patch | 320 ------------------ > ...e-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch | 0 > ...-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch | 0 > .../0003-use-asm-sgidefs.h.patch | 0 > .../0004-gdbserver-fix-build-for-m68k.patch | 0 > ...fork-inferior-include-linux-ptrace.h.patch | 0 > ...etrandom-compile-for-uclibc-v1.0.35.patch} | 0 > .../0007-fix-musl-build-on-riscv.patch | 0 > ...gdbserver-Makefile.in-fix-NLS-build.patch} | 0 > package/gdb/Config.in.host | 2 +- > package/gdb/gdb.hash | 2 +- > 13 files changed, 2 insertions(+), 626 deletions(-) > delete mode 100644 package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch > delete mode 100644 package/gdb/11.1/0008-Fix-build-on-rhES5.patch > delete mode 100644 package/gdb/11.1/0010-gdbserver-aarch64-support.patch > rename package/gdb/{11.1 => 11.2}/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch (100%) > rename package/gdb/{11.1 => 11.2}/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch (100%) > rename package/gdb/{11.1 => 11.2}/0003-use-asm-sgidefs.h.patch (100%) > rename package/gdb/{11.1 => 11.2}/0004-gdbserver-fix-build-for-m68k.patch (100%) > rename package/gdb/{11.1 => 11.2}/0005-nat-fork-inferior-include-linux-ptrace.h.patch (100%) > rename package/gdb/{11.1/0007-Fix-getrandom-compile-for-uclibc-v1.0.35.patch => 11.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch} (100%) > rename package/gdb/{11.1 => 11.2}/0007-fix-musl-build-on-riscv.patch (100%) > rename package/gdb/{11.1/0009-gdbserver-Makefile.in-fix-NLS-build.patch => 11.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch} (100%) > > diff --git a/package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch b/package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch > deleted file mode 100644 > index d969d98831..0000000000 > --- a/package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch > +++ /dev/null > @@ -1,110 +0,0 @@ > -From 7b3df9b8938357c2b0dcf2624e599a76fc4edc02 Mon Sep 17 00:00:00 2001 > -From: Mike Frysinger <vapier@gentoo.org> > -Date: Sun, 3 Oct 2021 12:02:53 -0400 > -Subject: [PATCH] sim: filter out SIGSTKSZ [PR sim/28302] > - > -We map target signals to host signals so we can propagate signals > -between the host & simulated worlds. That means we need to know > -the symbolic names & values of all signals that might be sent. > - > -The tools that generate that list use signal.h and include all > -symbols that start with "SIG" so as to automatically include any > -new symbols that the C library might add. Unfortunately, this > -also picks up "SIGSTKSZ" which is not actually a signal itself, > -but a signal related setting -- it's the size of the stack when > -a signal is handled. > - > -By itself this doesn't super matter as we will never see a signal > -with that same value (since the range of valid signals tend to be > -way less than 1024, and the size of the default signal stack will > -never be that small). But with recent glibc changes that make this > -into a dynamic value instead of a compile-time constant, some users > -see build failures when building the sim. > - > -As suggested by Adam Sampson, update our scripts to ignore this > -symbol to simplify everything and avoid the build failure. > - > -Bug: https://sourceware.org/PR28302 > - > -[Upstream: https://sourceware.org/git/?p=binutils-gdb.git;a=patch;h=39d53d04357606a15efd400147fa7369d71baf2c] > -Signed-off-by: Peter Seiderer <ps.report@gmx.net> > ---- > - sim/bfin/linux-targ-map.h | 5 +---- > - sim/common/gennltvals.py | 6 ++++-- > - sim/common/nltvals.def | 1 - > - 3 files changed, 5 insertions(+), 7 deletions(-) > - > -diff --git a/sim/bfin/linux-targ-map.h b/sim/bfin/linux-targ-map.h > -index e9c8c8f..0340ed5 100644 > ---- a/sim/bfin/linux-targ-map.h > -+++ b/sim/bfin/linux-targ-map.h > -@@ -30,6 +30,7 @@ echo > - # XXX: nothing uses this ? > - echo '#include <signal.h>' | \ > - bfin-uclinux-gcc -E -dD -P - | \ > -+grep -v SIGSTKSZ | \ > - sed -r -n \ > - -e '1istatic CB_TARGET_DEFS_MAP cb_linux_signal_map[] = {' \ > - -e '$i\ \ { 0, -1, -1 }\n};' \ > -@@ -1987,10 +1988,6 @@ static CB_TARGET_DEFS_MAP cb_linux_signal_map[] = > - #ifdef SIG_SETMASK > - # define TARGET_LINUX_SIG_SETMASK 2 > - { "SIG_SETMASK", SIG_SETMASK, TARGET_LINUX_SIG_SETMASK }, > --#endif > --#ifdef SIGSTKSZ > --# define TARGET_LINUX_SIGSTKSZ 8192 > -- { "SIGSTKSZ", SIGSTKSZ, TARGET_LINUX_SIGSTKSZ }, > - #endif > - { 0, -1, -1 } > - }; > -diff --git a/sim/common/gennltvals.py b/sim/common/gennltvals.py > -index b3e558d..bd4d7e9 100755 > ---- a/sim/common/gennltvals.py > -+++ b/sim/common/gennltvals.py > -@@ -67,6 +67,7 @@ FILE_HEADER = f"""\ > - def gentvals(output: TextIO, cpp: str, srctype: str, srcdir: Path, > - headers: Iterable[str], > - pattern: str, > -+ filter: str = r'^$', > - target: str = None): > - """Extract constants from the specified files using a regular expression. > - > -@@ -94,12 +95,13 @@ def gentvals(output: TextIO, cpp: str, srctype: str, srcdir: Path, > - srcfile = ''.join(f'#include <{x}>\n' for x in headers) > - syms = set() > - define_pattern = re.compile(r'^#\s*define\s+(' + pattern + ')') > -+ filter_pattern = re.compile(filter) > - for header in headers: > - with open(srcdir / header, 'r', encoding='utf-8') as fp: > - data = fp.read() > - for line in data.splitlines(): > - m = define_pattern.match(line) > -- if m: > -+ if m and not filter_pattern.search(line): > - syms.add(m.group(1)) > - for sym in sorted(syms): > - srcfile += f'#ifdef {sym}\nDEFVAL {{ "{sym}", {sym} }},\n#endif\n' > -@@ -129,7 +131,7 @@ def gen_common(output: TextIO, newlib: Path, cpp: str): > - ('errno.h', 'sys/errno.h'), 'E[A-Z0-9]*') > - > - gentvals(output, cpp, 'signal', newlib / 'newlib/libc/include', > -- ('signal.h', 'sys/signal.h'), r'SIG[A-Z0-9]*') > -+ ('signal.h', 'sys/signal.h'), r'SIG[A-Z0-9]*', filter=r'SIGSTKSZ') > - > - gentvals(output, cpp, 'open', newlib / 'newlib/libc/include', > - ('fcntl.h', 'sys/fcntl.h', 'sys/_default_fcntl.h'), r'O_[A-Z0-9]*') > -diff --git a/sim/common/nltvals.def b/sim/common/nltvals.def > -index 8ae8839..8bc6ae5 100644 > ---- a/sim/common/nltvals.def > -+++ b/sim/common/nltvals.def > -@@ -116,7 +116,6 @@ > - { "SIGPROF", 27 }, > - { "SIGQUIT", 3 }, > - { "SIGSEGV", 11 }, > -- { "SIGSTKSZ", 8192 }, > - { "SIGSTOP", 17 }, > - { "SIGSYS", 12 }, > - { "SIGTERM", 15 }, > --- > -2.33.1 > - > diff --git a/package/gdb/11.1/0008-Fix-build-on-rhES5.patch b/package/gdb/11.1/0008-Fix-build-on-rhES5.patch > deleted file mode 100644 > index 2d4e30ffe1..0000000000 > --- a/package/gdb/11.1/0008-Fix-build-on-rhES5.patch > +++ /dev/null > @@ -1,194 +0,0 @@ > -From db3aaeda1d6b156100d969edb8c0e674bca6b201 Mon Sep 17 00:00:00 2001 > -From: Tom Tromey <tromey@adacore.com> > -Date: Wed, 12 May 2021 12:39:22 -0600 > -Subject: [PATCH] Fix build on rhES5 > - > -The rhES5 build failed due to an upstream import a while back. The > -bug here is that, while the 'personality' function exists, > -ADDR_NO_RANDOMIZE is only defined in <linux/personality.h>, not > -<sys/personality.h>. > - > -However, <linux/personality.h> does not declare the 'personality' > -function, and <sys/personality.h> and <linux/personality.h> cannot > -both be included. > - > -This patch restores one of the removed configure checks and updates > -the code to check it. > - > -We had this as a local patch at AdaCore, because it seemed like there > -was no interest upstream. However, now it turns out that this fixes > -PR build/28555, so I'm sending it now. > - > -[Upstream: https://sourceware.org/git?p=binutils-gdb.git;h=0b03c6f03d51f441d999e0cee92f81af543d9373] > -Signed-off-by: Peter Seiderer <ps.report@gmx.net> > ---- > - gdb/config.in | 4 ++++ > - gdb/configure | 16 ++++++++++++++++ > - gdb/nat/linux-personality.c | 4 ++++ > - gdbserver/config.in | 4 ++++ > - gdbserver/configure | 16 ++++++++++++++++ > - gdbsupport/common.m4 | 5 +++++ > - gdbsupport/config.in | 4 ++++ > - gdbsupport/configure | 16 ++++++++++++++++ > - 8 files changed, 69 insertions(+) > - > -diff --git a/gdb/config.in b/gdb/config.in > -index 2c30504..776bee9 100644 > ---- a/gdb/config.in > -+++ b/gdb/config.in > -@@ -96,6 +96,10 @@ > - /* define if the compiler supports basic C++11 syntax */ > - #undef HAVE_CXX11 > - > -+/* Define to 1 if you have the declaration of `ADDR_NO_RANDOMIZE', and to 0 if > -+ you don't. */ > -+#undef HAVE_DECL_ADDR_NO_RANDOMIZE > -+ > - /* Define to 1 if you have the declaration of `asprintf', and to 0 if you > - don't. */ > - #undef HAVE_DECL_ASPRINTF > -diff --git a/gdb/configure b/gdb/configure > -index 5d89635..27e3194 100755 > ---- a/gdb/configure > -+++ b/gdb/configure > -@@ -13838,6 +13838,22 @@ fi > - done > - > - > -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. > -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, > -+ # only in linux/personality.h. > -+ ac_fn_c_check_decl "$LINENO" "ADDR_NO_RANDOMIZE" "ac_cv_have_decl_ADDR_NO_RANDOMIZE" "#include <sys/personality.h> > -+" > -+if test "x$ac_cv_have_decl_ADDR_NO_RANDOMIZE" = xyes; then : > -+ ac_have_decl=1 > -+else > -+ ac_have_decl=0 > -+fi > -+ > -+cat >>confdefs.h <<_ACEOF > -+#define HAVE_DECL_ADDR_NO_RANDOMIZE $ac_have_decl > -+_ACEOF > -+ > -+ > - ac_fn_c_check_decl "$LINENO" "strstr" "ac_cv_have_decl_strstr" "$ac_includes_default" > - if test "x$ac_cv_have_decl_strstr" = xyes; then : > - ac_have_decl=1 > -diff --git a/gdb/nat/linux-personality.c b/gdb/nat/linux-personality.c > -index 9ce345b..27999fd 100644 > ---- a/gdb/nat/linux-personality.c > -+++ b/gdb/nat/linux-personality.c > -@@ -22,6 +22,10 @@ > - > - #include <sys/personality.h> > - > -+# if !HAVE_DECL_ADDR_NO_RANDOMIZE > -+# define ADDR_NO_RANDOMIZE 0x0040000 > -+# endif /* ! HAVE_DECL_ADDR_NO_RANDOMIZE */ > -+ > - /* See comment on nat/linux-personality.h. */ > - > - maybe_disable_address_space_randomization:: > -diff --git a/gdbserver/config.in b/gdbserver/config.in > -index cf06c56..c9258b3 100644 > ---- a/gdbserver/config.in > -+++ b/gdbserver/config.in > -@@ -31,6 +31,10 @@ > - /* define if the compiler supports basic C++11 syntax */ > - #undef HAVE_CXX11 > - > -+/* Define to 1 if you have the declaration of `ADDR_NO_RANDOMIZE', and to 0 if > -+ you don't. */ > -+#undef HAVE_DECL_ADDR_NO_RANDOMIZE > -+ > - /* Define to 1 if you have the declaration of `asprintf', and to 0 if you > - don't. */ > - #undef HAVE_DECL_ASPRINTF > -diff --git a/gdbserver/configure b/gdbserver/configure > -index b227167..d399d71 100755 > ---- a/gdbserver/configure > -+++ b/gdbserver/configure > -@@ -7131,6 +7131,22 @@ fi > - done > - > - > -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. > -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, > -+ # only in linux/personality.h. > -+ ac_fn_c_check_decl "$LINENO" "ADDR_NO_RANDOMIZE" "ac_cv_have_decl_ADDR_NO_RANDOMIZE" "#include <sys/personality.h> > -+" > -+if test "x$ac_cv_have_decl_ADDR_NO_RANDOMIZE" = xyes; then : > -+ ac_have_decl=1 > -+else > -+ ac_have_decl=0 > -+fi > -+ > -+cat >>confdefs.h <<_ACEOF > -+#define HAVE_DECL_ADDR_NO_RANDOMIZE $ac_have_decl > -+_ACEOF > -+ > -+ > - ac_fn_c_check_decl "$LINENO" "strstr" "ac_cv_have_decl_strstr" "$ac_includes_default" > - if test "x$ac_cv_have_decl_strstr" = xyes; then : > - ac_have_decl=1 > -diff --git a/gdbsupport/common.m4 b/gdbsupport/common.m4 > -index 901c454..56a355e 100644 > ---- a/gdbsupport/common.m4 > -+++ b/gdbsupport/common.m4 > -@@ -55,6 +55,11 @@ AC_DEFUN([GDB_AC_COMMON], [ > - ptrace64 sbrk setns sigaltstack sigprocmask \ > - setpgid setpgrp getrusage getauxval sigtimedwait]) > - > -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. > -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, > -+ # only in linux/personality.h. > -+ AC_CHECK_DECLS([ADDR_NO_RANDOMIZE],,, [#include <sys/personality.h>]) > -+ > - AC_CHECK_DECLS([strstr]) > - > - # ----------------------- # > -diff --git a/gdbsupport/config.in b/gdbsupport/config.in > -index f46e261..6945a62 100644 > ---- a/gdbsupport/config.in > -+++ b/gdbsupport/config.in > -@@ -28,6 +28,10 @@ > - /* define if the compiler supports basic C++11 syntax */ > - #undef HAVE_CXX11 > - > -+/* Define to 1 if you have the declaration of `ADDR_NO_RANDOMIZE', and to 0 if > -+ you don't. */ > -+#undef HAVE_DECL_ADDR_NO_RANDOMIZE > -+ > - /* Define to 1 if you have the declaration of `asprintf', and to 0 if you > - don't. */ > - #undef HAVE_DECL_ASPRINTF > -diff --git a/gdbsupport/configure b/gdbsupport/configure > -index a9dd02c..243a03f 100755 > ---- a/gdbsupport/configure > -+++ b/gdbsupport/configure > -@@ -8144,6 +8144,22 @@ fi > - done > - > - > -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. > -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, > -+ # only in linux/personality.h. > -+ ac_fn_c_check_decl "$LINENO" "ADDR_NO_RANDOMIZE" "ac_cv_have_decl_ADDR_NO_RANDOMIZE" "#include <sys/personality.h> > -+" > -+if test "x$ac_cv_have_decl_ADDR_NO_RANDOMIZE" = xyes; then : > -+ ac_have_decl=1 > -+else > -+ ac_have_decl=0 > -+fi > -+ > -+cat >>confdefs.h <<_ACEOF > -+#define HAVE_DECL_ADDR_NO_RANDOMIZE $ac_have_decl > -+_ACEOF > -+ > -+ > - ac_fn_c_check_decl "$LINENO" "strstr" "ac_cv_have_decl_strstr" "$ac_includes_default" > - if test "x$ac_cv_have_decl_strstr" = xyes; then : > - ac_have_decl=1 > --- > -2.33.1 > - > diff --git a/package/gdb/11.1/0010-gdbserver-aarch64-support.patch b/package/gdb/11.1/0010-gdbserver-aarch64-support.patch > deleted file mode 100644 > index 3718b1b6fd..0000000000 > --- a/package/gdb/11.1/0010-gdbserver-aarch64-support.patch > +++ /dev/null > @@ -1,320 +0,0 @@ > -From eb79b2318066cafb75ffdce310e3bbd44f7c79e3 Mon Sep 17 00:00:00 2001 > -From: Luis Machado <luis.machado@linaro.org> > -Date: Fri, 29 Oct 2021 14:54:36 -0300 > -Subject: [PATCH] [AArch64] Make gdbserver register set selection dynamic > - > -The current register set selection mechanism for AArch64 is static, based > -on a pre-populated array of register sets. > - > -This means that we might potentially probe register sets that are not > -available. This is OK if the kernel errors out during ptrace, but probing the > -tag_ctl register, for example, does not result in a ptrace error if the kernel > -supports the tagged address ABI but not MTE (PR 28355). > - > -Making the register set selection dynamic, based on feature checks, solves > -this and simplifies the code a bit. It allows us to list all of the register > -sets only once, and pick and choose based on HWCAP/HWCAP2 or other properties. > - > -gdb/ChangeLog: > - > -2021-11-03 Luis Machado <luis.machado@linaro.org> > - > - PR gdb/28355 > - > - * arch/aarch64.h (struct aarch64_features): New struct. > - > -gdbserver/ChangeLog: > - > -2021-11-03 Luis Machado <luis.machado@linaro.org> > - > - PR gdb/28355 > - > - * linux-aarch64-low.cc (is_sve_tdesc): Remove. > - (aarch64_target::low_arch_setup): Rework to adjust the register sets. > - (aarch64_regsets): Update to list all register sets. > - (aarch64_regsets_info, regs_info_aarch64): Replace NULL with nullptr. > - (aarch64_sve_regsets, aarch64_sve_regsets_info) > - (regs_info_aarch64_sve): Remove. > - (aarch64_adjust_register_sets): New. > - (aarch64_target::get_regs_info): Remove references to removed structs. > - (initialize_low_arch): Likewise. > - > -Backported from: eb79b2318066cafb75ffdce310e3bbd44f7c79e3 > -Signed-off-by: Joachim Wiberg <troglobit@gmail.com> > ---- > - gdb/arch/aarch64.h | 9 ++ > - gdbserver/linux-aarch64-low.cc | 186 ++++++++++++++++++--------------- > - 4 files changed, 130 insertions(+), 85 deletions(-) > - > -diff --git a/gdb/arch/aarch64.h b/gdb/arch/aarch64.h > -index 0eb702c5b5e..95edb664b55 100644 > ---- a/gdb/arch/aarch64.h > -+++ b/gdb/arch/aarch64.h > -@@ -22,6 +22,15 @@ > - > - #include "gdbsupport/tdesc.h" > - > -+/* Holds information on what architectural features are available. This is > -+ used to select register sets. */ > -+struct aarch64_features > -+{ > -+ bool sve = false; > -+ bool pauth = false; > -+ bool mte = false; > -+}; > -+ > - /* Create the aarch64 target description. A non zero VQ value indicates both > - the presence of SVE and the Vector Quotient - the number of 128bit chunks in > - an SVE Z register. HAS_PAUTH_P indicates the presence of the PAUTH > -diff --git a/gdbserver/linux-aarch64-low.cc b/gdbserver/linux-aarch64-low.cc > -index daccfef746e..9a8cb4169a7 100644 > ---- a/gdbserver/linux-aarch64-low.cc > -+++ b/gdbserver/linux-aarch64-low.cc > -@@ -196,16 +196,6 @@ is_64bit_tdesc (void) > - return register_size (regcache->tdesc, 0) == 8; > - } > - > --/* Return true if the regcache contains the number of SVE registers. */ > -- > --static bool > --is_sve_tdesc (void) > --{ > -- struct regcache *regcache = get_thread_regcache (current_thread, 0); > -- > -- return tdesc_contains_feature (regcache->tdesc, "org.gnu.gdb.aarch64.sve"); > --} > -- > - static void > - aarch64_fill_gregset (struct regcache *regcache, void *buf) > - { > -@@ -680,40 +670,6 @@ aarch64_target::low_new_fork (process_info *parent, > - *child->priv->arch_private = *parent->priv->arch_private; > - } > - > --/* Matches HWCAP_PACA in kernel header arch/arm64/include/uapi/asm/hwcap.h. */ > --#define AARCH64_HWCAP_PACA (1 << 30) > -- > --/* Implementation of linux target ops method "low_arch_setup". */ > -- > --void > --aarch64_target::low_arch_setup () > --{ > -- unsigned int machine; > -- int is_elf64; > -- int tid; > -- > -- tid = lwpid_of (current_thread); > -- > -- is_elf64 = linux_pid_exe_is_elf_64_file (tid, &machine); > -- > -- if (is_elf64) > -- { > -- uint64_t vq = aarch64_sve_get_vq (tid); > -- unsigned long hwcap = linux_get_hwcap (8); > -- unsigned long hwcap2 = linux_get_hwcap2 (8); > -- bool pauth_p = hwcap & AARCH64_HWCAP_PACA; > -- /* MTE is AArch64-only. */ > -- bool mte_p = hwcap2 & HWCAP2_MTE; > -- > -- current_process ()->tdesc > -- = aarch64_linux_read_description (vq, pauth_p, mte_p); > -- } > -- else > -- current_process ()->tdesc = aarch32_linux_read_description (); > -- > -- aarch64_linux_get_debug_reg_capacity (lwpid_of (current_thread)); > --} > -- > - /* Wrapper for aarch64_sve_regs_copy_to_reg_buf. */ > - > - static void > -@@ -730,21 +686,36 @@ aarch64_sve_regs_copy_from_regcache (struct regcache *regcache, void *buf) > - return aarch64_sve_regs_copy_from_reg_buf (regcache, buf); > - } > - > -+/* Array containing all the possible register sets for AArch64/Linux. During > -+ architecture setup, these will be checked against the HWCAP/HWCAP2 bits for > -+ validity and enabled/disabled accordingly. > -+ > -+ Their sizes are set to 0 here, but they will be adjusted later depending > -+ on whether each register set is available or not. */ > - static struct regset_info aarch64_regsets[] = > - { > -+ /* GPR registers. */ > - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_PRSTATUS, > -- sizeof (struct user_pt_regs), GENERAL_REGS, > -+ 0, GENERAL_REGS, > - aarch64_fill_gregset, aarch64_store_gregset }, > -+ /* Floating Point (FPU) registers. */ > - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_FPREGSET, > -- sizeof (struct user_fpsimd_state), FP_REGS, > -+ 0, FP_REGS, > - aarch64_fill_fpregset, aarch64_store_fpregset > - }, > -+ /* Scalable Vector Extension (SVE) registers. */ > -+ { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_SVE, > -+ 0, EXTENDED_REGS, > -+ aarch64_sve_regs_copy_from_regcache, aarch64_sve_regs_copy_to_regcache > -+ }, > -+ /* PAC registers. */ > - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_PAC_MASK, > -- AARCH64_PAUTH_REGS_SIZE, OPTIONAL_REGS, > -- NULL, aarch64_store_pauthregset }, > -+ 0, OPTIONAL_REGS, > -+ nullptr, aarch64_store_pauthregset }, > -+ /* Tagged address control / MTE registers. */ > - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_TAGGED_ADDR_CTRL, > -- AARCH64_LINUX_SIZEOF_MTE, OPTIONAL_REGS, aarch64_fill_mteregset, > -- aarch64_store_mteregset }, > -+ 0, OPTIONAL_REGS, > -+ aarch64_fill_mteregset, aarch64_store_mteregset }, > - NULL_REGSET > - }; > - > -@@ -752,47 +723,95 @@ static struct regsets_info aarch64_regsets_info = > - { > - aarch64_regsets, /* regsets */ > - 0, /* num_regsets */ > -- NULL, /* disabled_regsets */ > -+ nullptr, /* disabled_regsets */ > - }; > - > - static struct regs_info regs_info_aarch64 = > - { > -- NULL, /* regset_bitmap */ > -- NULL, /* usrregs */ > -+ nullptr, /* regset_bitmap */ > -+ nullptr, /* usrregs */ > - &aarch64_regsets_info, > - }; > - > --static struct regset_info aarch64_sve_regsets[] = > -+/* Given FEATURES, adjust the available register sets by setting their > -+ sizes. A size of 0 means the register set is disabled and won't be > -+ used. */ > -+ > -+static void > -+aarch64_adjust_register_sets (const struct aarch64_features &features) > - { > -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_PRSTATUS, > -- sizeof (struct user_pt_regs), GENERAL_REGS, > -- aarch64_fill_gregset, aarch64_store_gregset }, > -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_SVE, > -- SVE_PT_SIZE (AARCH64_MAX_SVE_VQ, SVE_PT_REGS_SVE), EXTENDED_REGS, > -- aarch64_sve_regs_copy_from_regcache, aarch64_sve_regs_copy_to_regcache > -- }, > -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_PAC_MASK, > -- AARCH64_PAUTH_REGS_SIZE, OPTIONAL_REGS, > -- NULL, aarch64_store_pauthregset }, > -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_TAGGED_ADDR_CTRL, > -- AARCH64_LINUX_SIZEOF_MTE, OPTIONAL_REGS, aarch64_fill_mteregset, > -- aarch64_store_mteregset }, > -- NULL_REGSET > --}; > -+ struct regset_info *regset; > - > --static struct regsets_info aarch64_sve_regsets_info = > -- { > -- aarch64_sve_regsets, /* regsets. */ > -- 0, /* num_regsets. */ > -- NULL, /* disabled_regsets. */ > -- }; > -+ for (regset = aarch64_regsets; regset->size >= 0; regset++) > -+ { > -+ switch (regset->nt_type) > -+ { > -+ case NT_PRSTATUS: > -+ /* General purpose registers are always present. */ > -+ regset->size = sizeof (struct user_pt_regs); > -+ break; > -+ case NT_FPREGSET: > -+ /* This is unavailable when SVE is present. */ > -+ if (!features.sve) > -+ regset->size = sizeof (struct user_fpsimd_state); > -+ break; > -+ case NT_ARM_SVE: > -+ if (features.sve) > -+ regset->size = SVE_PT_SIZE (AARCH64_MAX_SVE_VQ, SVE_PT_REGS_SVE); > -+ break; > -+ case NT_ARM_PAC_MASK: > -+ if (features.pauth) > -+ regset->size = AARCH64_PAUTH_REGS_SIZE; > -+ break; > -+ case NT_ARM_TAGGED_ADDR_CTRL: > -+ if (features.mte) > -+ regset->size = AARCH64_LINUX_SIZEOF_MTE; > -+ break; > -+ default: > -+ gdb_assert_not_reached ("Unknown register set found."); > -+ } > -+ } > -+} > - > --static struct regs_info regs_info_aarch64_sve = > -- { > -- NULL, /* regset_bitmap. */ > -- NULL, /* usrregs. */ > -- &aarch64_sve_regsets_info, > -- }; > -+/* Matches HWCAP_PACA in kernel header arch/arm64/include/uapi/asm/hwcap.h. */ > -+#define AARCH64_HWCAP_PACA (1 << 30) > -+ > -+/* Implementation of linux target ops method "low_arch_setup". */ > -+ > -+void > -+aarch64_target::low_arch_setup () > -+{ > -+ unsigned int machine; > -+ int is_elf64; > -+ int tid; > -+ > -+ tid = lwpid_of (current_thread); > -+ > -+ is_elf64 = linux_pid_exe_is_elf_64_file (tid, &machine); > -+ > -+ if (is_elf64) > -+ { > -+ struct aarch64_features features; > -+ > -+ uint64_t vq = aarch64_sve_get_vq (tid); > -+ features.sve = (vq > 0); > -+ /* A-profile PAC is 64-bit only. */ > -+ features.pauth = linux_get_hwcap (8) & AARCH64_HWCAP_PACA; > -+ /* A-profile MTE is 64-bit only. */ > -+ features.mte = linux_get_hwcap2 (8) & HWCAP2_MTE; > -+ > -+ current_process ()->tdesc > -+ = aarch64_linux_read_description (vq, features.pauth, features.mte); > -+ > -+ /* Adjust the register sets we should use for this particular set of > -+ features. */ > -+ aarch64_adjust_register_sets (features); > -+ } > -+ else > -+ current_process ()->tdesc = aarch32_linux_read_description (); > -+ > -+ aarch64_linux_get_debug_reg_capacity (lwpid_of (current_thread)); > -+} > - > - /* Implementation of linux target ops method "get_regs_info". */ > - > -@@ -802,9 +821,7 @@ aarch64_target::get_regs_info () > - if (!is_64bit_tdesc ()) > - return ®s_info_aarch32; > - > -- if (is_sve_tdesc ()) > -- return ®s_info_aarch64_sve; > -- > -+ /* AArch64 64-bit registers. */ > - return ®s_info_aarch64; > - } > - > -@@ -3294,5 +3311,4 @@ initialize_low_arch (void) > - initialize_low_arch_aarch32 (); > - > - initialize_regsets_info (&aarch64_regsets_info); > -- initialize_regsets_info (&aarch64_sve_regsets_info); > - } > --- > -2.27.0 > - > diff --git a/package/gdb/11.1/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch b/package/gdb/11.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch > similarity index 100% > rename from package/gdb/11.1/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch > rename to package/gdb/11.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch > diff --git a/package/gdb/11.1/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch b/package/gdb/11.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch > similarity index 100% > rename from package/gdb/11.1/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch > rename to package/gdb/11.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch > diff --git a/package/gdb/11.1/0003-use-asm-sgidefs.h.patch b/package/gdb/11.2/0003-use-asm-sgidefs.h.patch > similarity index 100% > rename from package/gdb/11.1/0003-use-asm-sgidefs.h.patch > rename to package/gdb/11.2/0003-use-asm-sgidefs.h.patch > diff --git a/package/gdb/11.1/0004-gdbserver-fix-build-for-m68k.patch b/package/gdb/11.2/0004-gdbserver-fix-build-for-m68k.patch > similarity index 100% > rename from package/gdb/11.1/0004-gdbserver-fix-build-for-m68k.patch > rename to package/gdb/11.2/0004-gdbserver-fix-build-for-m68k.patch > diff --git a/package/gdb/11.1/0005-nat-fork-inferior-include-linux-ptrace.h.patch b/package/gdb/11.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch > similarity index 100% > rename from package/gdb/11.1/0005-nat-fork-inferior-include-linux-ptrace.h.patch > rename to package/gdb/11.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch > diff --git a/package/gdb/11.1/0007-Fix-getrandom-compile-for-uclibc-v1.0.35.patch b/package/gdb/11.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch > similarity index 100% > rename from package/gdb/11.1/0007-Fix-getrandom-compile-for-uclibc-v1.0.35.patch > rename to package/gdb/11.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch > diff --git a/package/gdb/11.1/0007-fix-musl-build-on-riscv.patch b/package/gdb/11.2/0007-fix-musl-build-on-riscv.patch > similarity index 100% > rename from package/gdb/11.1/0007-fix-musl-build-on-riscv.patch > rename to package/gdb/11.2/0007-fix-musl-build-on-riscv.patch > diff --git a/package/gdb/11.1/0009-gdbserver-Makefile.in-fix-NLS-build.patch b/package/gdb/11.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch > similarity index 100% > rename from package/gdb/11.1/0009-gdbserver-Makefile.in-fix-NLS-build.patch > rename to package/gdb/11.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch > diff --git a/package/gdb/Config.in.host b/package/gdb/Config.in.host > index 56999fa9e0..d3dea0b0a7 100644 > --- a/package/gdb/Config.in.host > +++ b/package/gdb/Config.in.host > @@ -71,7 +71,7 @@ config BR2_GDB_VERSION > default "4ecb98fbc2f94dbe01b69384afbc515107de73df" if BR2_csky > default "9.2" if BR2_GDB_VERSION_9_2 > default "10.2" if BR2_GDB_VERSION_10 || !BR2_PACKAGE_HOST_GDB > - default "11.1" if BR2_GDB_VERSION_11 > + default "11.2" if BR2_GDB_VERSION_11 > depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDB > > # recent gdb versions (>= 10) have gdbserver moved at the top-level, > diff --git a/package/gdb/gdb.hash b/package/gdb/gdb.hash > index d3e83af0b9..e7933374f1 100644 > --- a/package/gdb/gdb.hash > +++ b/package/gdb/gdb.hash > @@ -1,7 +1,7 @@ > # From ftp://gcc.gnu.org/pub/gdb/releases/sha512.sum > sha512 73635f00f343117aa5e2436f1e1597099e2bfb31ef7bb162b273fa1ea282c3fa9b0f52762e70bfc7ad0334addb8d159e9ac7cbe5998ca4f755ea8cf90714d274 gdb-9.2.tar.xz > sha512 3653762ac008e065c37cd641653184c9ff7ce51ee2222ade1122bec9d6cc64dffd4fb74888ef11ac1942064a08910e96b7865112ad37f4602eb0a16bed074caa gdb-10.2.tar.xz > -sha512 c40bf970e2f7c2107b29c5aa6a7150daa709d75ddadb73ac20742419d4637d158e3063a4c6ff6e47fae8ca8e1d36253973f85ea15445d004be6d5d7a2dd9bd46 gdb-11.1.tar.xz > +sha512 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127 gdb-11.2.tar.xz > > # Locally calculated (fetched from Github) > sha512 5a2acf2fd33ab2ff589e1037ca40abda54328997dcff26b2b49b874bd3be980be5a63342962254f3c3bda98e32ce7a33af704d37353352833dee193135600458 gdb-arc-2020.09-release-gdb.tar.gz
>>>>> "Thomas" == Thomas Petazzoni via buildroot <buildroot@buildroot.org> writes: > This is a minor corrective release over GDB 11.1, fixing the following issues: > PR sim/28302 (gdb fails to build with glibc 2.34) > PR build/28318 (std::thread support configure check does not use > CXX_DIALECT) > PR gdb/28405 (arm-none-eabi: internal-error: ptid_t > remote_target::select_thread_for_ambiguous_stop_reply(const > target_waitstatus*): Assertion `first_resumed_thread != nullptr' > failed) > PR tui/28483 ([gdb/tui] breakpoint creation not displayed) > PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) > PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) > PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) > PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) > Drop patch 0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch, which was > merged upstream as commit 17d6f2152b583cdc7defafa7813b727a304bac5b. > Drop patch 0008-Fix-build-on-rhES5.patch, which was merged upstream as > commit df9ebc472a162306dee8ba6e02b99963c2babb7c? > Drop patch 0009-gdbserver-aarch64-support.patch, which was merged > upstream as commit eb79b2318066cafb75ffdce310e3bbd44f7c79e3. > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Committed to 2021.11.x, thanks.
diff --git a/package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch b/package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch deleted file mode 100644 index d969d98831..0000000000 --- a/package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch +++ /dev/null @@ -1,110 +0,0 @@ -From 7b3df9b8938357c2b0dcf2624e599a76fc4edc02 Mon Sep 17 00:00:00 2001 -From: Mike Frysinger <vapier@gentoo.org> -Date: Sun, 3 Oct 2021 12:02:53 -0400 -Subject: [PATCH] sim: filter out SIGSTKSZ [PR sim/28302] - -We map target signals to host signals so we can propagate signals -between the host & simulated worlds. That means we need to know -the symbolic names & values of all signals that might be sent. - -The tools that generate that list use signal.h and include all -symbols that start with "SIG" so as to automatically include any -new symbols that the C library might add. Unfortunately, this -also picks up "SIGSTKSZ" which is not actually a signal itself, -but a signal related setting -- it's the size of the stack when -a signal is handled. - -By itself this doesn't super matter as we will never see a signal -with that same value (since the range of valid signals tend to be -way less than 1024, and the size of the default signal stack will -never be that small). But with recent glibc changes that make this -into a dynamic value instead of a compile-time constant, some users -see build failures when building the sim. - -As suggested by Adam Sampson, update our scripts to ignore this -symbol to simplify everything and avoid the build failure. - -Bug: https://sourceware.org/PR28302 - -[Upstream: https://sourceware.org/git/?p=binutils-gdb.git;a=patch;h=39d53d04357606a15efd400147fa7369d71baf2c] -Signed-off-by: Peter Seiderer <ps.report@gmx.net> ---- - sim/bfin/linux-targ-map.h | 5 +---- - sim/common/gennltvals.py | 6 ++++-- - sim/common/nltvals.def | 1 - - 3 files changed, 5 insertions(+), 7 deletions(-) - -diff --git a/sim/bfin/linux-targ-map.h b/sim/bfin/linux-targ-map.h -index e9c8c8f..0340ed5 100644 ---- a/sim/bfin/linux-targ-map.h -+++ b/sim/bfin/linux-targ-map.h -@@ -30,6 +30,7 @@ echo - # XXX: nothing uses this ? - echo '#include <signal.h>' | \ - bfin-uclinux-gcc -E -dD -P - | \ -+grep -v SIGSTKSZ | \ - sed -r -n \ - -e '1istatic CB_TARGET_DEFS_MAP cb_linux_signal_map[] = {' \ - -e '$i\ \ { 0, -1, -1 }\n};' \ -@@ -1987,10 +1988,6 @@ static CB_TARGET_DEFS_MAP cb_linux_signal_map[] = - #ifdef SIG_SETMASK - # define TARGET_LINUX_SIG_SETMASK 2 - { "SIG_SETMASK", SIG_SETMASK, TARGET_LINUX_SIG_SETMASK }, --#endif --#ifdef SIGSTKSZ --# define TARGET_LINUX_SIGSTKSZ 8192 -- { "SIGSTKSZ", SIGSTKSZ, TARGET_LINUX_SIGSTKSZ }, - #endif - { 0, -1, -1 } - }; -diff --git a/sim/common/gennltvals.py b/sim/common/gennltvals.py -index b3e558d..bd4d7e9 100755 ---- a/sim/common/gennltvals.py -+++ b/sim/common/gennltvals.py -@@ -67,6 +67,7 @@ FILE_HEADER = f"""\ - def gentvals(output: TextIO, cpp: str, srctype: str, srcdir: Path, - headers: Iterable[str], - pattern: str, -+ filter: str = r'^$', - target: str = None): - """Extract constants from the specified files using a regular expression. - -@@ -94,12 +95,13 @@ def gentvals(output: TextIO, cpp: str, srctype: str, srcdir: Path, - srcfile = ''.join(f'#include <{x}>\n' for x in headers) - syms = set() - define_pattern = re.compile(r'^#\s*define\s+(' + pattern + ')') -+ filter_pattern = re.compile(filter) - for header in headers: - with open(srcdir / header, 'r', encoding='utf-8') as fp: - data = fp.read() - for line in data.splitlines(): - m = define_pattern.match(line) -- if m: -+ if m and not filter_pattern.search(line): - syms.add(m.group(1)) - for sym in sorted(syms): - srcfile += f'#ifdef {sym}\nDEFVAL {{ "{sym}", {sym} }},\n#endif\n' -@@ -129,7 +131,7 @@ def gen_common(output: TextIO, newlib: Path, cpp: str): - ('errno.h', 'sys/errno.h'), 'E[A-Z0-9]*') - - gentvals(output, cpp, 'signal', newlib / 'newlib/libc/include', -- ('signal.h', 'sys/signal.h'), r'SIG[A-Z0-9]*') -+ ('signal.h', 'sys/signal.h'), r'SIG[A-Z0-9]*', filter=r'SIGSTKSZ') - - gentvals(output, cpp, 'open', newlib / 'newlib/libc/include', - ('fcntl.h', 'sys/fcntl.h', 'sys/_default_fcntl.h'), r'O_[A-Z0-9]*') -diff --git a/sim/common/nltvals.def b/sim/common/nltvals.def -index 8ae8839..8bc6ae5 100644 ---- a/sim/common/nltvals.def -+++ b/sim/common/nltvals.def -@@ -116,7 +116,6 @@ - { "SIGPROF", 27 }, - { "SIGQUIT", 3 }, - { "SIGSEGV", 11 }, -- { "SIGSTKSZ", 8192 }, - { "SIGSTOP", 17 }, - { "SIGSYS", 12 }, - { "SIGTERM", 15 }, --- -2.33.1 - diff --git a/package/gdb/11.1/0008-Fix-build-on-rhES5.patch b/package/gdb/11.1/0008-Fix-build-on-rhES5.patch deleted file mode 100644 index 2d4e30ffe1..0000000000 --- a/package/gdb/11.1/0008-Fix-build-on-rhES5.patch +++ /dev/null @@ -1,194 +0,0 @@ -From db3aaeda1d6b156100d969edb8c0e674bca6b201 Mon Sep 17 00:00:00 2001 -From: Tom Tromey <tromey@adacore.com> -Date: Wed, 12 May 2021 12:39:22 -0600 -Subject: [PATCH] Fix build on rhES5 - -The rhES5 build failed due to an upstream import a while back. The -bug here is that, while the 'personality' function exists, -ADDR_NO_RANDOMIZE is only defined in <linux/personality.h>, not -<sys/personality.h>. - -However, <linux/personality.h> does not declare the 'personality' -function, and <sys/personality.h> and <linux/personality.h> cannot -both be included. - -This patch restores one of the removed configure checks and updates -the code to check it. - -We had this as a local patch at AdaCore, because it seemed like there -was no interest upstream. However, now it turns out that this fixes -PR build/28555, so I'm sending it now. - -[Upstream: https://sourceware.org/git?p=binutils-gdb.git;h=0b03c6f03d51f441d999e0cee92f81af543d9373] -Signed-off-by: Peter Seiderer <ps.report@gmx.net> ---- - gdb/config.in | 4 ++++ - gdb/configure | 16 ++++++++++++++++ - gdb/nat/linux-personality.c | 4 ++++ - gdbserver/config.in | 4 ++++ - gdbserver/configure | 16 ++++++++++++++++ - gdbsupport/common.m4 | 5 +++++ - gdbsupport/config.in | 4 ++++ - gdbsupport/configure | 16 ++++++++++++++++ - 8 files changed, 69 insertions(+) - -diff --git a/gdb/config.in b/gdb/config.in -index 2c30504..776bee9 100644 ---- a/gdb/config.in -+++ b/gdb/config.in -@@ -96,6 +96,10 @@ - /* define if the compiler supports basic C++11 syntax */ - #undef HAVE_CXX11 - -+/* Define to 1 if you have the declaration of `ADDR_NO_RANDOMIZE', and to 0 if -+ you don't. */ -+#undef HAVE_DECL_ADDR_NO_RANDOMIZE -+ - /* Define to 1 if you have the declaration of `asprintf', and to 0 if you - don't. */ - #undef HAVE_DECL_ASPRINTF -diff --git a/gdb/configure b/gdb/configure -index 5d89635..27e3194 100755 ---- a/gdb/configure -+++ b/gdb/configure -@@ -13838,6 +13838,22 @@ fi - done - - -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, -+ # only in linux/personality.h. -+ ac_fn_c_check_decl "$LINENO" "ADDR_NO_RANDOMIZE" "ac_cv_have_decl_ADDR_NO_RANDOMIZE" "#include <sys/personality.h> -+" -+if test "x$ac_cv_have_decl_ADDR_NO_RANDOMIZE" = xyes; then : -+ ac_have_decl=1 -+else -+ ac_have_decl=0 -+fi -+ -+cat >>confdefs.h <<_ACEOF -+#define HAVE_DECL_ADDR_NO_RANDOMIZE $ac_have_decl -+_ACEOF -+ -+ - ac_fn_c_check_decl "$LINENO" "strstr" "ac_cv_have_decl_strstr" "$ac_includes_default" - if test "x$ac_cv_have_decl_strstr" = xyes; then : - ac_have_decl=1 -diff --git a/gdb/nat/linux-personality.c b/gdb/nat/linux-personality.c -index 9ce345b..27999fd 100644 ---- a/gdb/nat/linux-personality.c -+++ b/gdb/nat/linux-personality.c -@@ -22,6 +22,10 @@ - - #include <sys/personality.h> - -+# if !HAVE_DECL_ADDR_NO_RANDOMIZE -+# define ADDR_NO_RANDOMIZE 0x0040000 -+# endif /* ! HAVE_DECL_ADDR_NO_RANDOMIZE */ -+ - /* See comment on nat/linux-personality.h. */ - - maybe_disable_address_space_randomization:: -diff --git a/gdbserver/config.in b/gdbserver/config.in -index cf06c56..c9258b3 100644 ---- a/gdbserver/config.in -+++ b/gdbserver/config.in -@@ -31,6 +31,10 @@ - /* define if the compiler supports basic C++11 syntax */ - #undef HAVE_CXX11 - -+/* Define to 1 if you have the declaration of `ADDR_NO_RANDOMIZE', and to 0 if -+ you don't. */ -+#undef HAVE_DECL_ADDR_NO_RANDOMIZE -+ - /* Define to 1 if you have the declaration of `asprintf', and to 0 if you - don't. */ - #undef HAVE_DECL_ASPRINTF -diff --git a/gdbserver/configure b/gdbserver/configure -index b227167..d399d71 100755 ---- a/gdbserver/configure -+++ b/gdbserver/configure -@@ -7131,6 +7131,22 @@ fi - done - - -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, -+ # only in linux/personality.h. -+ ac_fn_c_check_decl "$LINENO" "ADDR_NO_RANDOMIZE" "ac_cv_have_decl_ADDR_NO_RANDOMIZE" "#include <sys/personality.h> -+" -+if test "x$ac_cv_have_decl_ADDR_NO_RANDOMIZE" = xyes; then : -+ ac_have_decl=1 -+else -+ ac_have_decl=0 -+fi -+ -+cat >>confdefs.h <<_ACEOF -+#define HAVE_DECL_ADDR_NO_RANDOMIZE $ac_have_decl -+_ACEOF -+ -+ - ac_fn_c_check_decl "$LINENO" "strstr" "ac_cv_have_decl_strstr" "$ac_includes_default" - if test "x$ac_cv_have_decl_strstr" = xyes; then : - ac_have_decl=1 -diff --git a/gdbsupport/common.m4 b/gdbsupport/common.m4 -index 901c454..56a355e 100644 ---- a/gdbsupport/common.m4 -+++ b/gdbsupport/common.m4 -@@ -55,6 +55,11 @@ AC_DEFUN([GDB_AC_COMMON], [ - ptrace64 sbrk setns sigaltstack sigprocmask \ - setpgid setpgrp getrusage getauxval sigtimedwait]) - -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, -+ # only in linux/personality.h. -+ AC_CHECK_DECLS([ADDR_NO_RANDOMIZE],,, [#include <sys/personality.h>]) -+ - AC_CHECK_DECLS([strstr]) - - # ----------------------- # -diff --git a/gdbsupport/config.in b/gdbsupport/config.in -index f46e261..6945a62 100644 ---- a/gdbsupport/config.in -+++ b/gdbsupport/config.in -@@ -28,6 +28,10 @@ - /* define if the compiler supports basic C++11 syntax */ - #undef HAVE_CXX11 - -+/* Define to 1 if you have the declaration of `ADDR_NO_RANDOMIZE', and to 0 if -+ you don't. */ -+#undef HAVE_DECL_ADDR_NO_RANDOMIZE -+ - /* Define to 1 if you have the declaration of `asprintf', and to 0 if you - don't. */ - #undef HAVE_DECL_ASPRINTF -diff --git a/gdbsupport/configure b/gdbsupport/configure -index a9dd02c..243a03f 100755 ---- a/gdbsupport/configure -+++ b/gdbsupport/configure -@@ -8144,6 +8144,22 @@ fi - done - - -+ # This is needed for RHEL 5 and uclibc-ng < 1.0.39. -+ # These did not define ADDR_NO_RANDOMIZE in sys/personality.h, -+ # only in linux/personality.h. -+ ac_fn_c_check_decl "$LINENO" "ADDR_NO_RANDOMIZE" "ac_cv_have_decl_ADDR_NO_RANDOMIZE" "#include <sys/personality.h> -+" -+if test "x$ac_cv_have_decl_ADDR_NO_RANDOMIZE" = xyes; then : -+ ac_have_decl=1 -+else -+ ac_have_decl=0 -+fi -+ -+cat >>confdefs.h <<_ACEOF -+#define HAVE_DECL_ADDR_NO_RANDOMIZE $ac_have_decl -+_ACEOF -+ -+ - ac_fn_c_check_decl "$LINENO" "strstr" "ac_cv_have_decl_strstr" "$ac_includes_default" - if test "x$ac_cv_have_decl_strstr" = xyes; then : - ac_have_decl=1 --- -2.33.1 - diff --git a/package/gdb/11.1/0010-gdbserver-aarch64-support.patch b/package/gdb/11.1/0010-gdbserver-aarch64-support.patch deleted file mode 100644 index 3718b1b6fd..0000000000 --- a/package/gdb/11.1/0010-gdbserver-aarch64-support.patch +++ /dev/null @@ -1,320 +0,0 @@ -From eb79b2318066cafb75ffdce310e3bbd44f7c79e3 Mon Sep 17 00:00:00 2001 -From: Luis Machado <luis.machado@linaro.org> -Date: Fri, 29 Oct 2021 14:54:36 -0300 -Subject: [PATCH] [AArch64] Make gdbserver register set selection dynamic - -The current register set selection mechanism for AArch64 is static, based -on a pre-populated array of register sets. - -This means that we might potentially probe register sets that are not -available. This is OK if the kernel errors out during ptrace, but probing the -tag_ctl register, for example, does not result in a ptrace error if the kernel -supports the tagged address ABI but not MTE (PR 28355). - -Making the register set selection dynamic, based on feature checks, solves -this and simplifies the code a bit. It allows us to list all of the register -sets only once, and pick and choose based on HWCAP/HWCAP2 or other properties. - -gdb/ChangeLog: - -2021-11-03 Luis Machado <luis.machado@linaro.org> - - PR gdb/28355 - - * arch/aarch64.h (struct aarch64_features): New struct. - -gdbserver/ChangeLog: - -2021-11-03 Luis Machado <luis.machado@linaro.org> - - PR gdb/28355 - - * linux-aarch64-low.cc (is_sve_tdesc): Remove. - (aarch64_target::low_arch_setup): Rework to adjust the register sets. - (aarch64_regsets): Update to list all register sets. - (aarch64_regsets_info, regs_info_aarch64): Replace NULL with nullptr. - (aarch64_sve_regsets, aarch64_sve_regsets_info) - (regs_info_aarch64_sve): Remove. - (aarch64_adjust_register_sets): New. - (aarch64_target::get_regs_info): Remove references to removed structs. - (initialize_low_arch): Likewise. - -Backported from: eb79b2318066cafb75ffdce310e3bbd44f7c79e3 -Signed-off-by: Joachim Wiberg <troglobit@gmail.com> ---- - gdb/arch/aarch64.h | 9 ++ - gdbserver/linux-aarch64-low.cc | 186 ++++++++++++++++++--------------- - 4 files changed, 130 insertions(+), 85 deletions(-) - -diff --git a/gdb/arch/aarch64.h b/gdb/arch/aarch64.h -index 0eb702c5b5e..95edb664b55 100644 ---- a/gdb/arch/aarch64.h -+++ b/gdb/arch/aarch64.h -@@ -22,6 +22,15 @@ - - #include "gdbsupport/tdesc.h" - -+/* Holds information on what architectural features are available. This is -+ used to select register sets. */ -+struct aarch64_features -+{ -+ bool sve = false; -+ bool pauth = false; -+ bool mte = false; -+}; -+ - /* Create the aarch64 target description. A non zero VQ value indicates both - the presence of SVE and the Vector Quotient - the number of 128bit chunks in - an SVE Z register. HAS_PAUTH_P indicates the presence of the PAUTH -diff --git a/gdbserver/linux-aarch64-low.cc b/gdbserver/linux-aarch64-low.cc -index daccfef746e..9a8cb4169a7 100644 ---- a/gdbserver/linux-aarch64-low.cc -+++ b/gdbserver/linux-aarch64-low.cc -@@ -196,16 +196,6 @@ is_64bit_tdesc (void) - return register_size (regcache->tdesc, 0) == 8; - } - --/* Return true if the regcache contains the number of SVE registers. */ -- --static bool --is_sve_tdesc (void) --{ -- struct regcache *regcache = get_thread_regcache (current_thread, 0); -- -- return tdesc_contains_feature (regcache->tdesc, "org.gnu.gdb.aarch64.sve"); --} -- - static void - aarch64_fill_gregset (struct regcache *regcache, void *buf) - { -@@ -680,40 +670,6 @@ aarch64_target::low_new_fork (process_info *parent, - *child->priv->arch_private = *parent->priv->arch_private; - } - --/* Matches HWCAP_PACA in kernel header arch/arm64/include/uapi/asm/hwcap.h. */ --#define AARCH64_HWCAP_PACA (1 << 30) -- --/* Implementation of linux target ops method "low_arch_setup". */ -- --void --aarch64_target::low_arch_setup () --{ -- unsigned int machine; -- int is_elf64; -- int tid; -- -- tid = lwpid_of (current_thread); -- -- is_elf64 = linux_pid_exe_is_elf_64_file (tid, &machine); -- -- if (is_elf64) -- { -- uint64_t vq = aarch64_sve_get_vq (tid); -- unsigned long hwcap = linux_get_hwcap (8); -- unsigned long hwcap2 = linux_get_hwcap2 (8); -- bool pauth_p = hwcap & AARCH64_HWCAP_PACA; -- /* MTE is AArch64-only. */ -- bool mte_p = hwcap2 & HWCAP2_MTE; -- -- current_process ()->tdesc -- = aarch64_linux_read_description (vq, pauth_p, mte_p); -- } -- else -- current_process ()->tdesc = aarch32_linux_read_description (); -- -- aarch64_linux_get_debug_reg_capacity (lwpid_of (current_thread)); --} -- - /* Wrapper for aarch64_sve_regs_copy_to_reg_buf. */ - - static void -@@ -730,21 +686,36 @@ aarch64_sve_regs_copy_from_regcache (struct regcache *regcache, void *buf) - return aarch64_sve_regs_copy_from_reg_buf (regcache, buf); - } - -+/* Array containing all the possible register sets for AArch64/Linux. During -+ architecture setup, these will be checked against the HWCAP/HWCAP2 bits for -+ validity and enabled/disabled accordingly. -+ -+ Their sizes are set to 0 here, but they will be adjusted later depending -+ on whether each register set is available or not. */ - static struct regset_info aarch64_regsets[] = - { -+ /* GPR registers. */ - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_PRSTATUS, -- sizeof (struct user_pt_regs), GENERAL_REGS, -+ 0, GENERAL_REGS, - aarch64_fill_gregset, aarch64_store_gregset }, -+ /* Floating Point (FPU) registers. */ - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_FPREGSET, -- sizeof (struct user_fpsimd_state), FP_REGS, -+ 0, FP_REGS, - aarch64_fill_fpregset, aarch64_store_fpregset - }, -+ /* Scalable Vector Extension (SVE) registers. */ -+ { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_SVE, -+ 0, EXTENDED_REGS, -+ aarch64_sve_regs_copy_from_regcache, aarch64_sve_regs_copy_to_regcache -+ }, -+ /* PAC registers. */ - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_PAC_MASK, -- AARCH64_PAUTH_REGS_SIZE, OPTIONAL_REGS, -- NULL, aarch64_store_pauthregset }, -+ 0, OPTIONAL_REGS, -+ nullptr, aarch64_store_pauthregset }, -+ /* Tagged address control / MTE registers. */ - { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_TAGGED_ADDR_CTRL, -- AARCH64_LINUX_SIZEOF_MTE, OPTIONAL_REGS, aarch64_fill_mteregset, -- aarch64_store_mteregset }, -+ 0, OPTIONAL_REGS, -+ aarch64_fill_mteregset, aarch64_store_mteregset }, - NULL_REGSET - }; - -@@ -752,47 +723,95 @@ static struct regsets_info aarch64_regsets_info = - { - aarch64_regsets, /* regsets */ - 0, /* num_regsets */ -- NULL, /* disabled_regsets */ -+ nullptr, /* disabled_regsets */ - }; - - static struct regs_info regs_info_aarch64 = - { -- NULL, /* regset_bitmap */ -- NULL, /* usrregs */ -+ nullptr, /* regset_bitmap */ -+ nullptr, /* usrregs */ - &aarch64_regsets_info, - }; - --static struct regset_info aarch64_sve_regsets[] = -+/* Given FEATURES, adjust the available register sets by setting their -+ sizes. A size of 0 means the register set is disabled and won't be -+ used. */ -+ -+static void -+aarch64_adjust_register_sets (const struct aarch64_features &features) - { -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_PRSTATUS, -- sizeof (struct user_pt_regs), GENERAL_REGS, -- aarch64_fill_gregset, aarch64_store_gregset }, -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_SVE, -- SVE_PT_SIZE (AARCH64_MAX_SVE_VQ, SVE_PT_REGS_SVE), EXTENDED_REGS, -- aarch64_sve_regs_copy_from_regcache, aarch64_sve_regs_copy_to_regcache -- }, -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_PAC_MASK, -- AARCH64_PAUTH_REGS_SIZE, OPTIONAL_REGS, -- NULL, aarch64_store_pauthregset }, -- { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_ARM_TAGGED_ADDR_CTRL, -- AARCH64_LINUX_SIZEOF_MTE, OPTIONAL_REGS, aarch64_fill_mteregset, -- aarch64_store_mteregset }, -- NULL_REGSET --}; -+ struct regset_info *regset; - --static struct regsets_info aarch64_sve_regsets_info = -- { -- aarch64_sve_regsets, /* regsets. */ -- 0, /* num_regsets. */ -- NULL, /* disabled_regsets. */ -- }; -+ for (regset = aarch64_regsets; regset->size >= 0; regset++) -+ { -+ switch (regset->nt_type) -+ { -+ case NT_PRSTATUS: -+ /* General purpose registers are always present. */ -+ regset->size = sizeof (struct user_pt_regs); -+ break; -+ case NT_FPREGSET: -+ /* This is unavailable when SVE is present. */ -+ if (!features.sve) -+ regset->size = sizeof (struct user_fpsimd_state); -+ break; -+ case NT_ARM_SVE: -+ if (features.sve) -+ regset->size = SVE_PT_SIZE (AARCH64_MAX_SVE_VQ, SVE_PT_REGS_SVE); -+ break; -+ case NT_ARM_PAC_MASK: -+ if (features.pauth) -+ regset->size = AARCH64_PAUTH_REGS_SIZE; -+ break; -+ case NT_ARM_TAGGED_ADDR_CTRL: -+ if (features.mte) -+ regset->size = AARCH64_LINUX_SIZEOF_MTE; -+ break; -+ default: -+ gdb_assert_not_reached ("Unknown register set found."); -+ } -+ } -+} - --static struct regs_info regs_info_aarch64_sve = -- { -- NULL, /* regset_bitmap. */ -- NULL, /* usrregs. */ -- &aarch64_sve_regsets_info, -- }; -+/* Matches HWCAP_PACA in kernel header arch/arm64/include/uapi/asm/hwcap.h. */ -+#define AARCH64_HWCAP_PACA (1 << 30) -+ -+/* Implementation of linux target ops method "low_arch_setup". */ -+ -+void -+aarch64_target::low_arch_setup () -+{ -+ unsigned int machine; -+ int is_elf64; -+ int tid; -+ -+ tid = lwpid_of (current_thread); -+ -+ is_elf64 = linux_pid_exe_is_elf_64_file (tid, &machine); -+ -+ if (is_elf64) -+ { -+ struct aarch64_features features; -+ -+ uint64_t vq = aarch64_sve_get_vq (tid); -+ features.sve = (vq > 0); -+ /* A-profile PAC is 64-bit only. */ -+ features.pauth = linux_get_hwcap (8) & AARCH64_HWCAP_PACA; -+ /* A-profile MTE is 64-bit only. */ -+ features.mte = linux_get_hwcap2 (8) & HWCAP2_MTE; -+ -+ current_process ()->tdesc -+ = aarch64_linux_read_description (vq, features.pauth, features.mte); -+ -+ /* Adjust the register sets we should use for this particular set of -+ features. */ -+ aarch64_adjust_register_sets (features); -+ } -+ else -+ current_process ()->tdesc = aarch32_linux_read_description (); -+ -+ aarch64_linux_get_debug_reg_capacity (lwpid_of (current_thread)); -+} - - /* Implementation of linux target ops method "get_regs_info". */ - -@@ -802,9 +821,7 @@ aarch64_target::get_regs_info () - if (!is_64bit_tdesc ()) - return ®s_info_aarch32; - -- if (is_sve_tdesc ()) -- return ®s_info_aarch64_sve; -- -+ /* AArch64 64-bit registers. */ - return ®s_info_aarch64; - } - -@@ -3294,5 +3311,4 @@ initialize_low_arch (void) - initialize_low_arch_aarch32 (); - - initialize_regsets_info (&aarch64_regsets_info); -- initialize_regsets_info (&aarch64_sve_regsets_info); - } --- -2.27.0 - diff --git a/package/gdb/11.1/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch b/package/gdb/11.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch similarity index 100% rename from package/gdb/11.1/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch rename to package/gdb/11.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch diff --git a/package/gdb/11.1/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch b/package/gdb/11.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch similarity index 100% rename from package/gdb/11.1/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch rename to package/gdb/11.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch diff --git a/package/gdb/11.1/0003-use-asm-sgidefs.h.patch b/package/gdb/11.2/0003-use-asm-sgidefs.h.patch similarity index 100% rename from package/gdb/11.1/0003-use-asm-sgidefs.h.patch rename to package/gdb/11.2/0003-use-asm-sgidefs.h.patch diff --git a/package/gdb/11.1/0004-gdbserver-fix-build-for-m68k.patch b/package/gdb/11.2/0004-gdbserver-fix-build-for-m68k.patch similarity index 100% rename from package/gdb/11.1/0004-gdbserver-fix-build-for-m68k.patch rename to package/gdb/11.2/0004-gdbserver-fix-build-for-m68k.patch diff --git a/package/gdb/11.1/0005-nat-fork-inferior-include-linux-ptrace.h.patch b/package/gdb/11.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch similarity index 100% rename from package/gdb/11.1/0005-nat-fork-inferior-include-linux-ptrace.h.patch rename to package/gdb/11.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch diff --git a/package/gdb/11.1/0007-Fix-getrandom-compile-for-uclibc-v1.0.35.patch b/package/gdb/11.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch similarity index 100% rename from package/gdb/11.1/0007-Fix-getrandom-compile-for-uclibc-v1.0.35.patch rename to package/gdb/11.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch diff --git a/package/gdb/11.1/0007-fix-musl-build-on-riscv.patch b/package/gdb/11.2/0007-fix-musl-build-on-riscv.patch similarity index 100% rename from package/gdb/11.1/0007-fix-musl-build-on-riscv.patch rename to package/gdb/11.2/0007-fix-musl-build-on-riscv.patch diff --git a/package/gdb/11.1/0009-gdbserver-Makefile.in-fix-NLS-build.patch b/package/gdb/11.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch similarity index 100% rename from package/gdb/11.1/0009-gdbserver-Makefile.in-fix-NLS-build.patch rename to package/gdb/11.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch diff --git a/package/gdb/Config.in.host b/package/gdb/Config.in.host index 56999fa9e0..d3dea0b0a7 100644 --- a/package/gdb/Config.in.host +++ b/package/gdb/Config.in.host @@ -71,7 +71,7 @@ config BR2_GDB_VERSION default "4ecb98fbc2f94dbe01b69384afbc515107de73df" if BR2_csky default "9.2" if BR2_GDB_VERSION_9_2 default "10.2" if BR2_GDB_VERSION_10 || !BR2_PACKAGE_HOST_GDB - default "11.1" if BR2_GDB_VERSION_11 + default "11.2" if BR2_GDB_VERSION_11 depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDB # recent gdb versions (>= 10) have gdbserver moved at the top-level, diff --git a/package/gdb/gdb.hash b/package/gdb/gdb.hash index d3e83af0b9..e7933374f1 100644 --- a/package/gdb/gdb.hash +++ b/package/gdb/gdb.hash @@ -1,7 +1,7 @@ # From ftp://gcc.gnu.org/pub/gdb/releases/sha512.sum sha512 73635f00f343117aa5e2436f1e1597099e2bfb31ef7bb162b273fa1ea282c3fa9b0f52762e70bfc7ad0334addb8d159e9ac7cbe5998ca4f755ea8cf90714d274 gdb-9.2.tar.xz sha512 3653762ac008e065c37cd641653184c9ff7ce51ee2222ade1122bec9d6cc64dffd4fb74888ef11ac1942064a08910e96b7865112ad37f4602eb0a16bed074caa gdb-10.2.tar.xz -sha512 c40bf970e2f7c2107b29c5aa6a7150daa709d75ddadb73ac20742419d4637d158e3063a4c6ff6e47fae8ca8e1d36253973f85ea15445d004be6d5d7a2dd9bd46 gdb-11.1.tar.xz +sha512 07e9026423438049b11f4f784d57401ece4e940570f613bd6958b3714fe7fbc2c048470bcce3e7d7d9f93331cdf3881d30dcc964cb113a071143a02b28e5b127 gdb-11.2.tar.xz # Locally calculated (fetched from Github) sha512 5a2acf2fd33ab2ff589e1037ca40abda54328997dcff26b2b49b874bd3be980be5a63342962254f3c3bda98e32ce7a33af704d37353352833dee193135600458 gdb-arc-2020.09-release-gdb.tar.gz
This is a minor corrective release over GDB 11.1, fixing the following issues: PR sim/28302 (gdb fails to build with glibc 2.34) PR build/28318 (std::thread support configure check does not use CXX_DIALECT) PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed) PR tui/28483 ([gdb/tui] breakpoint creation not displayed) PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) Drop patch 0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch, which was merged upstream as commit 17d6f2152b583cdc7defafa7813b727a304bac5b. Drop patch 0008-Fix-build-on-rhES5.patch, which was merged upstream as commit df9ebc472a162306dee8ba6e02b99963c2babb7c? Drop patch 0009-gdbserver-aarch64-support.patch, which was merged upstream as commit eb79b2318066cafb75ffdce310e3bbd44f7c79e3. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> --- ...sim-filter-out-SIGSTKSZ-PR-sim-28302.patch | 110 ------ .../gdb/11.1/0008-Fix-build-on-rhES5.patch | 194 ----------- .../11.1/0010-gdbserver-aarch64-support.patch | 320 ------------------ ...e-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch | 0 ...-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch | 0 .../0003-use-asm-sgidefs.h.patch | 0 .../0004-gdbserver-fix-build-for-m68k.patch | 0 ...fork-inferior-include-linux-ptrace.h.patch | 0 ...etrandom-compile-for-uclibc-v1.0.35.patch} | 0 .../0007-fix-musl-build-on-riscv.patch | 0 ...gdbserver-Makefile.in-fix-NLS-build.patch} | 0 package/gdb/Config.in.host | 2 +- package/gdb/gdb.hash | 2 +- 13 files changed, 2 insertions(+), 626 deletions(-) delete mode 100644 package/gdb/11.1/0006-sim-filter-out-SIGSTKSZ-PR-sim-28302.patch delete mode 100644 package/gdb/11.1/0008-Fix-build-on-rhES5.patch delete mode 100644 package/gdb/11.1/0010-gdbserver-aarch64-support.patch rename package/gdb/{11.1 => 11.2}/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch (100%) rename package/gdb/{11.1 => 11.2}/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch (100%) rename package/gdb/{11.1 => 11.2}/0003-use-asm-sgidefs.h.patch (100%) rename package/gdb/{11.1 => 11.2}/0004-gdbserver-fix-build-for-m68k.patch (100%) rename package/gdb/{11.1 => 11.2}/0005-nat-fork-inferior-include-linux-ptrace.h.patch (100%) rename package/gdb/{11.1/0007-Fix-getrandom-compile-for-uclibc-v1.0.35.patch => 11.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch} (100%) rename package/gdb/{11.1 => 11.2}/0007-fix-musl-build-on-riscv.patch (100%) rename package/gdb/{11.1/0009-gdbserver-Makefile.in-fix-NLS-build.patch => 11.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch} (100%)