diff mbox series

[1/1] configs/pcengines_apu2_defconfig: bump kernel to 5.16

Message ID 20220116211557.71866ff6@c3po
State Superseded
Headers show
Series [1/1] configs/pcengines_apu2_defconfig: bump kernel to 5.16 | expand

Commit Message

Danilo Bargen Jan. 16, 2022, 8:15 p.m. UTC 
This fixes the compile errors that were present with the previous kernel
version (4.19).

Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
---
 configs/pcengines_apu2_defconfig | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

--
2.34.1

Comments

Giulio Benetti Jan. 17, 2022, 8:06 p.m. UTC | #1 
Hi Danilo,

On 16/01/22 21:15, Danilo Bargen wrote:
> This fixes the compile errors that were present with the previous kernel
> version (4.19).

Is there a build failure log url that you can point?

I would also mention that you are refactoring defconfig file in commit log.

Thank you!
Best regards
diff mbox series

Patch

diff --git a/configs/pcengines_apu2_defconfig
b/configs/pcengines_apu2_defconfig index 68cebb8f6a..eb30f6aee7 100644
--- a/configs/pcengines_apu2_defconfig
+++ b/configs/pcengines_apu2_defconfig
@@ -1,16 +1,26 @@ 
+# Architecture
 BR2_x86_64=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-BR2_TARGET_GENERIC_HOSTNAME="apu2"
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-BR2_SYSTEM_DHCP="eth0"
+
+# Kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pcengines/apu2/linux.config"
+
+# Default hostname and TTY
+BR2_TARGET_GENERIC_HOSTNAME="apu2"
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Networking
+BR2_SYSTEM_DHCP="eth0"
+
+# Rootfs
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_ISO9660=y
 BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU="board/pcengines/apu2/isolinux.cfg"
 BR2_TARGET_ROOTFS_ISO9660_HYBRID=y
-# BR2_TARGET_ROOTFS_TAR is not set
+
+# Bootloader
 BR2_TARGET_SYSLINUX=y