new file mode 120000
@@ -0,0 +1 @@
+raspberrypi
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,35 @@
+BR2_arm=y
+BR2_arm1176jzf_s=y
+BR2_ARM_EABIHF=y
+
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="935c7ce84c982a26f567a03a58a1537424569938"
+BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
+
+# Build the DTBs for A/B from the kernel sources: the zero is the same
+# as the A+ model, just in a different form-factor
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b-plus bcm2708-rpi-0-w"
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y
+
+# Required tools to create the SD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+
+# Filesystem / image
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0w/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0w/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"
Add support for Raspberry Pi Zero W (same as Pi Zero with additional wireless and bluetooth support [1]). According to [2] has the same serial console vs. bluetooth problem as the Pi 3. Try the same fix (load pi3-miniuart-bt overlay). [1] https://www.raspberrypi.org/products/pi-zero-w [2] http://lists.busybox.net/pipermail/buildroot/2017-March/187295.html Signed-off-by: Peter Seiderer <ps.report@gmx.net> --- Untested (even not compile tested) because of lack of hardware... --- board/raspberrypi0w | 1 + configs/raspberrypi0w_defconfig | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) create mode 120000 board/raspberrypi0w create mode 100644 configs/raspberrypi0w_defconfig