new file mode 100644
@@ -0,0 +1,31 @@
+# Minimal microSD card image for Grinn's chiliBoard
+#
+
+image boot.vfat {
+ vfat {
+ files = {
+ "MLO",
+ "u-boot.img",
+ "am335x-chiliboard.dtb",
+ "zImage"
+ }
+ }
+ size = 16M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 1M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
new file mode 100755
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
new file mode 100644
@@ -0,0 +1,46 @@
+**********
+chiliBoard
+**********
+
+Build
+=====
+
+First, configure Buildroot for your chiliBoard:
+
+ make grinn_chiliboard_defconfig
+
+Build image:
+
+ make
+
+After building you should get a tree like this:
+
+ output/images/
+ ├── am335x-chiliboard.dtb
+ ├── boot.vfat
+ ├── MLO
+ ├── rootfs.ext2
+ ├── rootfs.ext4
+ ├── rootfs.tar
+ ├── sdcard.img
+ ├── u-boot.img
+ └── zImage
+
+Create a bootable microSD card
+==============================
+
+Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/
+directory, To flash SD card just run the following command:
+
+ sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M
+
+where <sd_card> can be sdX or mmcblkX
+
+*** WARNING! This will destroy all contents of device you specify! ***
+
+Boot chiliBoard
+===============
+
+- insert the microSD card in the microSD slot of the board;
+- plug micro USB cable to provide power and console interface
+- use terminal emulator with 115200 bps, 8n1
new file mode 100644
@@ -0,0 +1,28 @@
+BR2_arm=y
+BR2_cortex_a8=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
+BR2_SYSTEM_DHCP="eth0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/grinn/chiliboard/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-chiliboard"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.denx.de/u-boot.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="aac477eca88dd81b18b48573ababee5112d571f3"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="chiliboard"
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="spl/u-boot-spl.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="MLO"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
Board support package includes: * Buildroot defconfig * Mainline Linux kernel v4.9.5 * Mainline U-Boot (current HEAD revision is used, as board support patches are not in stable release yet) * genimage config to create sdcard image * Board readme.txt Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> --- Changes v1 -> v2: * U-Boot is fetched from mainline with specific git revision, as board support patches were just applied. This means that all U-Boot patches in Buildroot were dropped. * s/liteBoard/chiliBoard/ in readme.txt (suggested by Baruch) board/grinn/chiliboard/genimage.cfg | 31 ++++++++++++++++++++++++ board/grinn/chiliboard/post-image.sh | 14 +++++++++++ board/grinn/chiliboard/readme.txt | 46 ++++++++++++++++++++++++++++++++++++ configs/grinn_chiliboard_defconfig | 28 ++++++++++++++++++++++ 4 files changed, 119 insertions(+) create mode 100644 board/grinn/chiliboard/genimage.cfg create mode 100755 board/grinn/chiliboard/post-image.sh create mode 100644 board/grinn/chiliboard/readme.txt create mode 100644 configs/grinn_chiliboard_defconfig