diff mbox

[U-Boot,04/10] defconfigs: engicam: Enable MMC commands in nand

Message ID 1482318029-21701-5-git-send-email-jagan@openedev.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Jagan Teki Dec. 21, 2016, 11 a.m. UTC 
From: Jagan Teki <jagan@amarulasolutions.com>

For writing Linux or rootfs on to NAND, the best suitable way
is to use MMC commands since MMC driver by default enabled by
mx6_common.h, hence enabled MMC commands in nand defconfigs.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 configs/imx6dl_icore_nand_defconfig | 5 +++++
 configs/imx6q_icore_nand_defconfig  | 5 +++++
 configs/imx6ul_geam_nand_defconfig  | 5 +++++
 3 files changed, 15 insertions(+)
diff mbox

Patch

diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig
index 4e81a41..7f45744 100644
--- a/configs/imx6dl_icore_nand_defconfig
+++ b/configs/imx6dl_icore_nand_defconfig
@@ -18,8 +18,13 @@  CONFIG_CMD_I2C=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FEC_MXC=y
 CONFIG_MXC_UART=y
diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig
index 274e62b..572e33a 100644
--- a/configs/imx6q_icore_nand_defconfig
+++ b/configs/imx6q_icore_nand_defconfig
@@ -18,8 +18,13 @@  CONFIG_CMD_I2C=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FEC_MXC=y
 CONFIG_MXC_UART=y
diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
index a21c53a..55fa003 100644
--- a/configs/imx6ul_geam_nand_defconfig
+++ b/configs/imx6ul_geam_nand_defconfig
@@ -17,10 +17,15 @@  CONFIG_SYS_MAXARGS=32
 # CONFIG_DM_MMC_OPS is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_LIBFDT=y
 CONFIG_FEC_MXC=y
 CONFIG_MXC_UART=y