@@ -104,11 +104,52 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0)
+
+#define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+ "run distro_bootcmd; " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run userbutton; then " \
+ "setenv bootenv uEnv.txt;" \
+ "else " \
+ "setenv bootenv user.txt;" \
+ "fi;" \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot;" \
+ "fi;" \
+ "fi; " \
+ "fi;" \
+ "run nandboot;" \
+ "setenv bootfile zImage;" \
+ "if run loadimage; then " \
+ "run loadfdt;" \
+ "run mmcbootz; " \
+ "fi; " \
+
+#include <config_distro_bootcmd.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
+ "kernel_addr_r=0x80200000\0" \
"rdaddr=0x81000000\0" \
+ "initrd_addr_r=0x81000000\0" \
"fdt_high=0xffffffff\0" \
"fdtaddr=0x80f80000\0" \
+ "fdt_addr_r=0x80f80000\0" \
"usbtty=cdc_acm\0" \
"bootfile=uImage\0" \
"ramdisk=ramdisk.gz\0" \
@@ -203,39 +244,8 @@
"userbutton=if gpio input 173; then run userbutton_xm; " \
"else run userbutton_nonxm; fi;\0" \
"userbutton_xm=gpio input 4;\0" \
- "userbutton_nonxm=gpio input 7;\0"
-/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run userbutton; then " \
- "setenv bootenv uEnv.txt;" \
- "else " \
- "setenv bootenv user.txt;" \
- "fi;" \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot;" \
- "fi;" \
- "fi; " \
- "fi;" \
- "run nandboot;" \
- "setenv bootfile zImage;" \
- "if run loadimage; then " \
- "run loadfdt;" \
- "run mmcbootz; " \
- "fi; " \
+ "userbutton_nonxm=gpio input 7;\0" \
+ BOOTENV
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
Add support for distro_bootcmd on MMC and fall back to prior behavior if distro_bootcmd fails. Tested on Beagleboad xM to boot GRUB2 (and then Linux kernel) in EFI mode from MMC. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> --- include/configs/omap3_beagle.h | 76 ++++++++++++++++++++++++------------------ 1 file changed, 43 insertions(+), 33 deletions(-)