diff mbox

[U-Boot,27/33] ARM64: zynqmp: Add missing nand node for ep108

Message ID 7bee54a238e6ea898d86ba31e144abf682c6b235.1460048744.git.michal.simek@xilinx.com
State Accepted
Commit 4521202760d78533025fe3df4c7580f8bc97ae40
Delegated to: Michal Simek
Headers show

Commit Message

Michal Simek April 7, 2016, 5:05 p.m. UTC 
From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xilinx.com>

Add missing nand node for ep108.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/dts/zynqmp-ep108-clk.dtsi |  4 ++++
 arch/arm/dts/zynqmp-ep108.dts      | 31 +++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
index f86452655391..48bb426dafaf 100644
--- a/arch/arm/dts/zynqmp-ep108-clk.dtsi
+++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi
@@ -62,6 +62,10 @@ 
 	clocks = <&i2c_clk>;
 };
 
+&nand0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
 &qspi {
 	clocks = <&misc_clk &misc_clk>;
 };
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index e48a360baa72..0bbf9a759756 100644
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -73,6 +73,37 @@ 
 	};
 };
 
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+	num-cs = <1>;
+
+	partition@0 {	/* for testing purpose */
+		label = "nand-fsbl-uboot";
+		reg = <0x0 0x0 0x400000>;
+	};
+	partition@1 {	/* for testing purpose */
+		label = "nand-linux";
+		reg = <0x0 0x400000 0x1400000>;
+	};
+	partition@2 {	/* for testing purpose */
+		label = "nand-device-tree";
+		reg = <0x0 0x1800000 0x400000>;
+	};
+	partition@3 {	/* for testing purpose */
+		label = "nand-rootfs";
+		reg = <0x0 0x1C00000 0x1400000>;
+	};
+	partition@4 {	/* for testing purpose */
+		label = "nand-bitstream";
+		reg = <0x0 0x3000000 0x400000>;
+	};
+	partition@5 {	/* for testing purpose */
+		label = "nand-misc";
+		reg = <0x0 0x3400000 0xFCC00000>;
+	};
+};
+
 &qspi {
 	status = "okay";
 	flash@0 {