diff mbox

[3.19.y-ckt,stable] Patch "net: phy: bcm7xxx: Fix bcm7xxx_config_init() check" has been added to the 3.19.y-ckt tree

Message ID 1457483303-28640-1-git-send-email-kamal@canonical.com
State New
Headers show

Commit Message

Kamal Mostafa March 9, 2016, 12:28 a.m. UTC
This is a note to let you know that I have just added a patch titled

    net: phy: bcm7xxx: Fix bcm7xxx_config_init() check

to the linux-3.19.y-queue branch of the 3.19.y-ckt extended stable tree 
which can be found at:

    http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linux-3.19.y-queue

This patch is scheduled to be released in version 3.19.8-ckt16.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.19.y-ckt tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Kamal

---8<------------------------------------------------------------

From acac6b5b5052e38d760f108b02e1457efef3dbcd Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Sat, 6 Feb 2016 12:58:50 -0800
Subject: net: phy: bcm7xxx: Fix bcm7xxx_config_init() check

commit 258bf44364263cb6391f35ebaca3c2366655bded upstream.

Since we were wrongly advertising gigabit features for these 10/100 only
Ethernet PHYs, bcm7xxx_config_init() which is supposed to apply workaround
would have not run since the check would be true, now that we have fixed the
PHY features, remove that check since it has no reasoning to be there anymore.

Fixes: e18556ee3bd83 ("net: phy: bcm7xxx: do not use PHY_BRCM_100MBPS_WAR")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/net/phy/bcm7xxx.c | 4 ----
 1 file changed, 4 deletions(-)

--
2.7.0
diff mbox

Patch

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index ec93783..88d7858 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -314,10 +314,6 @@  static int bcm7xxx_config_init(struct phy_device *phydev)
 	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
 	phy_read(phydev, MII_BCM7XXX_AUX_MODE);

-	/* Workaround only required for 100Mbits/sec capable PHYs */
-	if (phydev->supported & PHY_GBIT_FEATURES)
-		return 0;
-
 	/* set shadow mode 2 */
 	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
 			MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);