@@ -333,6 +333,33 @@ static const struct mfd_cell stmpe_keypad_cell = {
.num_resources = ARRAY_SIZE(stmpe_keypad_resources),
};
+
+/*
+ * PWM (1601, 2401, 2403)
+ */
+static struct resource stmpe_pwm_resources[] = {
+ {
+ .name = "PWM0",
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "PWM1",
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "PWM2",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct mfd_cell stmpe_pwm_cell = {
+ .name = "stmpe-pwm",
+ .of_compatible = "st,stmpe-pwm",
+ .resources = stmpe_pwm_resources,
+ .num_resources = ARRAY_SIZE(stmpe_pwm_resources),
+};
+
+
/*
* STMPE801
*/
@@ -537,6 +564,11 @@ static struct stmpe_variant_block stmpe1601_blocks[] = {
.irq = STMPE1601_IRQ_KEYPAD,
.block = STMPE_BLOCK_KEYPAD,
},
+ {
+ .cell = &stmpe_pwm_cell,
+ .irq = STMPE1601_IRQ_PWM0,
+ .block = STMPE_BLOCK_PWM,
+ },
};
/* supported autosleep timeout delay (in msecs) */
@@ -771,6 +803,11 @@ static struct stmpe_variant_block stmpe24xx_blocks[] = {
.irq = STMPE24XX_IRQ_KEYPAD,
.block = STMPE_BLOCK_KEYPAD,
},
+ {
+ .cell = &stmpe_pwm_cell,
+ .irq = STMPE24XX_IRQ_PWM0,
+ .block = STMPE_BLOCK_PWM,
+ },
};
static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
@@ -362,6 +362,13 @@ config PWM_STI
To compile this driver as a module, choose M here: the module
will be called pwm-sti.
+config PWM_STMPE
+ bool "STMPE expander PWM export"
+ depends on MFD_STMPE
+ help
+ This enables support for the PWMs found in the STMPE I/O
+ expanders.
+
config PWM_SUN4I
tristate "Allwinner PWM support"
depends on ARCH_SUNXI || COMPILE_TEST
@@ -34,6 +34,7 @@ obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_STI) += pwm-sti.o
+obj-$(CONFIG_PWM_STMPE) += pwm-stmpe.o
obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
new file mode 100644
@@ -0,0 +1,297 @@
+/*
+ * Copyright (C) 2016 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pwm.h>
+#include <linux/of.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#define STMPE24XX_PWMCS 0x30
+#define PWMCS_EN_PWM0 BIT(0)
+#define PWMCS_EN_PWM1 BIT(1)
+#define PWMCS_EN_PWM2 BIT(2)
+#define STMPE24XX_PWMIC0 0x38
+#define STMPE24XX_PWMIC1 0x39
+#define STMPE24XX_PWMIC2 0x3a
+#define STMPE_PWM_24XX_PINBASE 21
+
+struct stmpe_pwm {
+ struct stmpe *stmpe;
+ struct pwm_chip chip;
+ u8 lastduty;
+ bool enabled;
+};
+
+static inline struct stmpe_pwm *to_stmpe_pwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct stmpe_pwm, chip);
+}
+
+static int stmpe_24xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
+ int ret;
+ u8 val;
+
+ ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
+ if (ret < 0) {
+ dev_err(chip->dev, "error reading PWM%d control\n",
+ pwm->hwpwm);
+ return ret;
+ }
+ val = (u8)ret;
+ val |= BIT(pwm->hwpwm);
+ ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, val);
+ if (ret) {
+ dev_err(chip->dev, "error writing PWM%d control\n",
+ pwm->hwpwm);
+ return ret;
+ }
+ stmpe_pwm->enabled = true;
+
+ return 0;
+}
+
+static void stmpe_24xx_pwm_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
+ int ret;
+ u8 val;
+
+ ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
+ if (ret < 0) {
+ dev_err(chip->dev, "error reading PWM%d control\n",
+ pwm->hwpwm);
+ return;
+ }
+ val = (u8)ret;
+ val &= ~BIT(pwm->hwpwm);
+ ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, val);
+ if (ret) {
+ dev_err(chip->dev, "error writing PWM%d control\n",
+ pwm->hwpwm);
+ return;
+ }
+ stmpe_pwm->enabled = false;
+}
+
+static int stmpe_24xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
+ u8 reg;
+ int ret;
+ int i;
+ unsigned int pin;
+ u16 program[3] = {
+ 0x007F, /* SMAX = logic low out */
+ 0x0000, /* GTS */
+ 0x0000, /* GTS */
+ };
+
+ /* This preserves enablement state across reconfig */
+ bool enabled = stmpe_pwm->enabled;
+
+ /* Make sure we are disabled */
+ if (enabled)
+ stmpe_24xx_pwm_disable(chip, pwm);
+
+ /* Connect the PWM to the pin */
+ pin = pwm->hwpwm;
+ /* On STMPE2401 and 2403 pins 21,22,23 are used */
+ if (stmpe_pwm->stmpe->partnum == STMPE2401 ||
+ stmpe_pwm->stmpe->partnum == STMPE2403)
+ pin += STMPE_PWM_24XX_PINBASE;
+ ret = stmpe_set_altfunc(stmpe_pwm->stmpe,
+ BIT(pin),
+ STMPE_BLOCK_PWM);
+ if (ret) {
+ dev_err(chip->dev, "unable to connect PWM%d to pin\n",
+ pwm->hwpwm);
+ return ret;
+ }
+
+ /* STMPE24XX */
+ if (pwm->hwpwm == 0)
+ reg = STMPE24XX_PWMIC0;
+ else if (pwm->hwpwm == 1)
+ reg = STMPE24XX_PWMIC1;
+ else if (pwm->hwpwm == 2)
+ reg = STMPE24XX_PWMIC1;
+ else
+ /* Should not happen as npwm is 3 */
+ return -ENODEV;
+
+ dev_dbg(chip->dev, "PWM%d: config duty %d ns, period %d ns\n",
+ pwm->hwpwm, duty_ns, period_ns);
+ if (duty_ns == 0) {
+ if (stmpe_pwm->stmpe->partnum == STMPE2401)
+ program[0] = 0x007F; /* SMAX = off all the time */
+ if (stmpe_pwm->stmpe->partnum == STMPE2403)
+ program[0] = BIT(14) | 0xFF; /* LOAD 0xFF */
+ stmpe_pwm->lastduty = 0x00;
+ } else if (duty_ns == period_ns) {
+ if (stmpe_pwm->stmpe->partnum == STMPE2401)
+ program[0] = 0x00FF; /* SMIN = on all the time */
+ if (stmpe_pwm->stmpe->partnum == STMPE2403)
+ program[0] = BIT(14); /* LOAD 0x00 */
+ stmpe_pwm->lastduty = 0xFF;
+ } else {
+ unsigned long cyc;
+ u8 val;
+
+ /*
+ * Counter goes from 0x00 to 0xFF repeatedly at 32768 Hz,
+ * (means a period of 30517 ns)
+ * then this is compared to the counter from the ramp,
+ * if this is >= pwm counter the output is high.
+ * With LOAD we can define how much of the cycle it is on.
+ *
+ * Prescale = 0 -> 2 kHz -> T = 1/f = 488281,25 ns
+ */
+ /* Scale to 0..FF */
+ cyc = duty_ns * 256;
+ cyc = DIV_ROUND_CLOSEST(cyc, period_ns);
+ val = cyc;
+
+ if (val == stmpe_pwm->lastduty) {
+ /* Do nothing */
+ } else if (stmpe_pwm->stmpe->partnum == STMPE2403) {
+ /* STMPE2403 can simply set the right PWM value */
+ program[0] = BIT(14) | val;
+ program[1] = 0x0000;
+ } else if (stmpe_pwm->stmpe->partnum == STMPE2401) {
+ /* STMPE2401 need a complex program */
+ u16 incdec = 0x0000;
+
+ if (stmpe_pwm->lastduty < val)
+ /* Count up */
+ incdec = (val - stmpe_pwm->lastduty);
+ else
+ /* Count down */
+ incdec = BIT(7) | (stmpe_pwm->lastduty - val);
+ /* Step to desired value, smoothly */
+ program[0] = BIT(14) | BIT(8) | incdec;
+ /* Loop eternally */
+ program[1] = BIT(15) | BIT(13);
+ }
+
+ dev_dbg(chip->dev, "PWM%d: val = %02x, lastduty = %02x, "
+ "program=%04x,%04x,%04x\n", pwm->hwpwm, val,
+ stmpe_pwm->lastduty, program[0], program[1],
+ program[2]);
+ stmpe_pwm->lastduty = val;
+ }
+
+ /*
+ * We can write programs of up to 64 16-bit words into this
+ * channel.
+ */
+ for (i = 0; i < ARRAY_SIZE(program); i++) {
+ u8 val;
+
+ val = (program[i] >> 8) & 0xFF;
+ ret = stmpe_reg_write(stmpe_pwm->stmpe, reg, val);
+ if (ret) {
+ dev_err(chip->dev, "error writing reg\n");
+ return ret;
+ }
+ val = program[i] & 0xFF;
+ ret = stmpe_reg_write(stmpe_pwm->stmpe, reg, val);
+ if (ret) {
+ dev_err(chip->dev, "error writing reg\n");
+ return ret;
+ }
+ }
+ /* If we were enabled, re-enable this PWM */
+ if (enabled)
+ stmpe_24xx_pwm_enable(chip, pwm);
+
+ /* Sleep for 200ms so we're sure it will take effect */
+ msleep(200);
+
+ dev_dbg(chip->dev, "programmed PWM%d, %d bytes\n",
+ pwm->hwpwm, i);
+ return 0;
+}
+
+static const struct pwm_ops stmpe_24xx_pwm_ops = {
+ .config = stmpe_24xx_pwm_config,
+ .enable = stmpe_24xx_pwm_enable,
+ .disable = stmpe_24xx_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int stmpe_pwm_probe(struct platform_device *pdev)
+{
+ struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct stmpe_pwm *pwm;
+ int ret;
+
+ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+ if (!pwm)
+ return -ENOMEM;
+
+ pwm->stmpe = stmpe;
+ pwm->chip.dev = &pdev->dev;
+ pwm->chip.base = pdev->id;
+ if (stmpe->partnum == STMPE2401 || stmpe->partnum == STMPE2403) {
+ pwm->chip.ops = &stmpe_24xx_pwm_ops;
+ pwm->chip.npwm = 3;
+ } else if (stmpe->partnum == STMPE1601) {
+ dev_err(&pdev->dev, "STMPE1601 PWM not yet supported\n");
+ return -EINVAL;
+ } else {
+ dev_err(&pdev->dev, "Unsupported STMPE PWM\n");
+ return -EINVAL;
+ }
+
+ ret = stmpe_enable(stmpe, STMPE_BLOCK_PWM);
+ if (ret)
+ return ret;
+
+ ret = pwmchip_add(&pwm->chip);
+ if (ret)
+ return ret;
+
+ dev_info(&pdev->dev, "STMPE PWM registered\n");
+ platform_set_drvdata(pdev, pwm);
+
+ return 0;
+}
+
+static int stmpe_pwm_remove(struct platform_device *pdev)
+{
+ struct stmpe_pwm *pwm = platform_get_drvdata(pdev);
+ struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+
+ stmpe_disable(stmpe, STMPE_BLOCK_PWM);
+ return pwmchip_remove(&pwm->chip);
+}
+
+static struct platform_driver stmpe_pwm_driver = {
+ .driver = {
+ .name = "stmpe-pwm",
+ },
+ .probe = stmpe_pwm_probe,
+ .remove = stmpe_pwm_remove,
+};
+module_platform_driver(stmpe_pwm_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("STMPE Pulse Width Modulation Driver");
+MODULE_ALIAS("platform:pwm-stmpe");
+MODULE_LICENSE("GPL v2");
This adds a driver for the STMPE 24xx series of multi-purpose I2C expanders. (I think STMPE means ST Microelectronics Multi-Purpose Expander.) This PWM was designed in accordance with Nokia specifications and is kind of weird and usually just switched between max and zero dutycycle. However it is indeed a PWM so it needs to live in the PWM subsystem. This PWM is mostly used for white LED backlight. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Lee could you ACK the few lines added to drivers/mfd/stmpe.c so that the PWM maintainers can take this through their tree? Thanks. --- drivers/mfd/stmpe.c | 37 ++++++ drivers/pwm/Kconfig | 7 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-stmpe.c | 297 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 342 insertions(+) create mode 100644 drivers/pwm/pwm-stmpe.c