@@ -72,6 +72,7 @@ struct exynos_dp_priv {
unsigned char dpcd_rev;
/*support enhanced frame cap */
unsigned char dpcd_efc;
+ struct exynos_dp *regs;
};
enum analog_power_block {
@@ -152,21 +152,6 @@ int board_early_init_f(void)
board_i2c_init(gd->fdt_blob);
#endif
-#if defined(CONFIG_EXYNOS_FB)
- /*
- * board_init_f(arch/arm/lib/board.c) calls lcd_setmem() which needs
- * panel_info.vl_col, panel_info.vl_row and panel_info.vl_bpix,
- * to reserve frame-buffer memory at a very early stage. So, we need
- * to fill panel_info.vl_col, panel_info.vl_row and panel_info.vl_bpix
- * before lcd_setmem() is called.
- */
- err = exynos_lcd_early_init(gd->fdt_blob);
- if (err) {
- debug("LCD early init failed\n");
- return err;
- }
-#endif
-
return exynos_early_init_f();
}
#endif
@@ -27,6 +27,8 @@ CONFIG_DM_PMIC=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_TPS65090=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_EXYNOS=y
CONFIG_SOUND=y
CONFIG_I2S=y
CONFIG_I2S_SAMSUNG=y
@@ -36,6 +38,7 @@ CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_TPM=y
@@ -27,6 +27,8 @@ CONFIG_DM_PMIC=y
CONFIG_PMIC_TPS65090=y
CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_TPS65090=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_EXYNOS=y
CONFIG_SOUND=y
CONFIG_I2S=y
CONFIG_I2S_SAMSUNG=y
@@ -36,6 +38,7 @@ CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_TPM=y
@@ -32,6 +32,8 @@ CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_EXYNOS=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_S5P=y
CONFIG_DEBUG_UART_BASE=0x12c30000
@@ -45,6 +47,7 @@ CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_VIDEO_BRIDGE_NXP_PTN3460=y
@@ -32,6 +32,8 @@ CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_EXYNOS=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_S5P=y
CONFIG_DEBUG_UART_BASE=0x12c30000
@@ -45,6 +47,7 @@ CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_TPM=y
@@ -7,17 +7,21 @@
*/
#include <config.h>
+#include <dm.h>
#include <common.h>
+#include <display.h>
+#include <fdtdec.h>
+#include <libfdt.h>
#include <malloc.h>
+#include <video_bridge.h>
#include <linux/compat.h>
#include <linux/err.h>
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dp_info.h>
#include <asm/arch/dp.h>
+#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
-#include <fdtdec.h>
-#include <libfdt.h>
#include "exynos_dp_lowlevel.h"
@@ -872,15 +876,19 @@ static unsigned int exynos_dp_config_video(struct exynos_dp *regs,
return ret;
}
-int exynos_dp_parse_dt(const void *blob, struct exynos_dp_priv *priv)
+static int exynos_dp_ofdata_to_platdata(struct udevice *dev)
{
- unsigned int node = fdtdec_next_compatible(blob, 0,
- COMPAT_SAMSUNG_EXYNOS5_DP);
- if (node <= 0) {
- debug("exynos_dp: Can't get device node for dp\n");
- return -ENODEV;
- }
+ struct exynos_dp_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ unsigned int node = dev->of_offset;
+ fdt_addr_t addr;
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("Can't get the DP base address\n");
+ return -EINVAL;
+ }
+ priv->regs = (struct exynos_dp *)addr;
priv->disp_info.h_res = fdtdec_get_int(blob, node,
"samsung,h-res", 0);
priv->disp_info.h_sync_width = fdtdec_get_int(blob, node,
@@ -926,34 +934,97 @@ int exynos_dp_parse_dt(const void *blob, struct exynos_dp_priv *priv)
return 0;
}
-unsigned int exynos_init_dp(void)
+static int exynos_dp_bridge_init(struct udevice *dev)
{
- unsigned int ret;
- struct exynos_dp_priv *priv;
- struct exynos_dp *regs;
- int node;
+ const int max_tries = 10;
+ int num_tries;
+ int ret;
- priv = kzalloc(sizeof(struct exynos_dp_priv), GFP_KERNEL);
- if (!priv) {
- debug("failed to allocate edp device object.\n");
- return -EFAULT;
+ debug("%s\n", __func__);
+ ret = video_bridge_attach(dev);
+ if (ret) {
+ debug("video bridge init failed: %d\n", ret);
+ return ret;
}
- if (exynos_dp_parse_dt(gd->fdt_blob, priv))
- debug("unable to parse DP DT node\n");
+ /*
+ * We need to wait for 90ms after bringing up the bridge since there
+ * is a phantom "high" on the HPD chip during its bootup. The phantom
+ * high comes within 7ms of de-asserting PD and persists for at least
+ * 15ms. The real high comes roughly 50ms after PD is de-asserted. The
+ * phantom high makes it hard for us to know when the NXP chip is up.
+ */
+ mdelay(90);
- node = fdtdec_next_compatible(gd->fdt_blob, 0,
- COMPAT_SAMSUNG_EXYNOS5_DP);
- if (node <= 0)
- debug("exynos_dp: Can't get device node for dp\n");
+ for (num_tries = 0; num_tries < max_tries; num_tries++) {
+ /* Check HPD. If it's high, or we don't have it, all is well */
+ ret = video_bridge_check_attached(dev);
+ if (!ret || ret == -ENOENT)
+ return 0;
- regs = (struct exynos_dp *)fdtdec_get_addr(gd->fdt_blob, node,
- "reg");
- if (regs == NULL)
- debug("Can't get the DP base address\n");
+ debug("%s: eDP bridge failed to come up; try %d of %d\n",
+ __func__, num_tries, max_tries);
+ }
+
+ /* Immediately go into bridge reset if the hp line is not high */
+ return -EIO;
+}
+
+static int exynos_dp_bridge_setup(const void *blob)
+{
+ const int max_tries = 2;
+ int num_tries;
+ struct udevice *dev;
+ int ret;
+
+ /* Configure I2C registers for Parade bridge */
+ ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &dev);
+ if (ret) {
+ debug("video bridge init failed: %d\n", ret);
+ return ret;
+ }
+
+ if (strncmp(dev->driver->name, "parade", 6)) {
+ /* Mux HPHPD to the special hotplug detect mode */
+ exynos_pinmux_config(PERIPH_ID_DPHPD, 0);
+ }
+
+ for (num_tries = 0; num_tries < max_tries; num_tries++) {
+ ret = exynos_dp_bridge_init(dev);
+ if (!ret)
+ return 0;
+ if (num_tries == max_tries - 1)
+ break;
+
+ /*
+ * If we're here, the bridge chip failed to initialise.
+ * Power down the bridge in an attempt to reset.
+ */
+ video_bridge_set_active(dev, false);
+
+ /*
+ * Arbitrarily wait 300ms here with DP_N low. Don't know for
+ * sure how long we should wait, but we're being paranoid.
+ */
+ mdelay(300);
+ }
+ return ret;
+}
+int exynos_dp_enable(struct udevice *dev, int panel_bpp,
+ const struct display_timing *timing)
+{
+ struct exynos_dp_priv *priv = dev_get_priv(dev);
+ struct exynos_dp *regs = priv->regs;
+ unsigned int ret;
+
+ debug("%s: start\n", __func__);
exynos_dp_disp_info(&priv->disp_info);
+ ret = exynos_dp_bridge_setup(gd->fdt_blob);
+ if (ret && ret != -ENODEV)
+ printf("LCD bridge failed to enable: %d\n", ret);
+
exynos_dp_phy_ctrl(1);
ret = exynos_dp_init_dp(regs);
@@ -992,3 +1063,22 @@ unsigned int exynos_init_dp(void)
return ret;
}
+
+
+static const struct dm_display_ops exynos_dp_ops = {
+ .enable = exynos_dp_enable,
+};
+
+static const struct udevice_id exynos_dp_ids[] = {
+ { .compatible = "samsung,exynos5-dp" },
+ { }
+};
+
+U_BOOT_DRIVER(exynos_dp) = {
+ .name = "eexynos_dp",
+ .id = UCLASS_DISPLAY,
+ .of_match = exynos_dp_ids,
+ .ops = &exynos_dp_ops,
+ .ofdata_to_platdata = exynos_dp_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct exynos_dp_priv),
+};
@@ -9,33 +9,98 @@
#include <config.h>
#include <common.h>
+#include <display.h>
#include <div64.h>
-#include <lcd.h>
+#include <dm.h>
#include <fdtdec.h>
#include <libfdt.h>
+#include <panel.h>
+#include <video.h>
+#include <video_bridge.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/clk.h>
#include <asm/arch/mipi_dsim.h>
#include <asm/arch/dp_info.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/pinmux.h>
#include <asm/arch/system.h>
#include <asm/gpio.h>
#include <asm-generic/errno.h>
-#include "exynos_fb.h"
-
DECLARE_GLOBAL_DATA_PTR;
-struct vidinfo panel_info = {
- /*
- * Insert a value here so that we don't end up in the BSS
- * Reference: drivers/video/tegra.c
- */
- .vl_col = -1,
+enum {
+ FIMD_RGB_INTERFACE = 1,
+ FIMD_CPU_INTERFACE = 2,
+};
+
+enum exynos_fb_rgb_mode_t {
+ MODE_RGB_P = 0,
+ MODE_BGR_P = 1,
+ MODE_RGB_S = 2,
+ MODE_BGR_S = 3,
};
-static void exynos_fimd_set_dualrgb(struct vidinfo *priv, unsigned int enabled)
+struct exynos_fb_priv {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_rot; /* Rotation of Display (0, 1, 2, 3) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_freq; /* Frequency */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix; /* Bits per pixel */
+
+ /* Horizontal control register. Timing from data sheet */
+ u_char vl_hspw; /* Horz sync pulse width */
+ u_char vl_hfpd; /* Wait before of line */
+ u_char vl_hbpd; /* Wait end of line */
+
+ /* Vertical control register. */
+ u_char vl_vspw; /* Vertical sync pulse width */
+ u_char vl_vfpd; /* Wait before of frame */
+ u_char vl_vbpd; /* Wait end of frame */
+ u_char vl_cmd_allow_len; /* Wait end of frame */
+
+ unsigned int win_id;
+ unsigned int init_delay;
+ unsigned int power_on_delay;
+ unsigned int reset_delay;
+ unsigned int interface_mode;
+ unsigned int mipi_enabled;
+ unsigned int dp_enabled;
+ unsigned int cs_setup;
+ unsigned int wr_setup;
+ unsigned int wr_act;
+ unsigned int wr_hold;
+ unsigned int logo_on;
+ unsigned int logo_width;
+ unsigned int logo_height;
+ int logo_x_offset;
+ int logo_y_offset;
+ unsigned long logo_addr;
+ unsigned int rgb_mode;
+ unsigned int resolution;
+
+ /* parent clock name(MPLL, EPLL or VPLL) */
+ unsigned int pclk_name;
+ /* ratio value for source clock from parent clock. */
+ unsigned int sclk_div;
+
+ unsigned int dual_lcd_enabled;
+ struct exynos_fb *reg;
+ struct exynos_platform_mipi_dsim *dsim_platform_data_dt;
+};
+
+static void exynos_fimd_set_dualrgb(struct exynos_fb_priv *priv, bool enabled)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -52,7 +117,7 @@ static void exynos_fimd_set_dualrgb(struct vidinfo *priv, unsigned int enabled)
writel(cfg, ®->dualrgb);
}
-static void exynos_fimd_set_dp_clkcon(struct vidinfo *priv,
+static void exynos_fimd_set_dp_clkcon(struct exynos_fb_priv *priv,
unsigned int enabled)
{
struct exynos_fb *reg = priv->reg;
@@ -64,7 +129,8 @@ static void exynos_fimd_set_dp_clkcon(struct vidinfo *priv,
writel(cfg, ®->dp_mie_clkcon);
}
-static void exynos_fimd_set_par(struct vidinfo *priv, unsigned int win_id)
+static void exynos_fimd_set_par(struct exynos_fb_priv *priv,
+ unsigned int win_id)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -117,7 +183,7 @@ static void exynos_fimd_set_par(struct vidinfo *priv, unsigned int win_id)
EXYNOS_VIDOSD(win_id));
}
-static void exynos_fimd_set_buffer_address(struct vidinfo *priv,
+static void exynos_fimd_set_buffer_address(struct exynos_fb_priv *priv,
unsigned int win_id,
ulong lcd_base_addr)
{
@@ -125,7 +191,7 @@ static void exynos_fimd_set_buffer_address(struct vidinfo *priv,
unsigned long start_addr, end_addr;
start_addr = lcd_base_addr;
- end_addr = start_addr + ((priv->vl_col * (NBITS(priv->vl_bpix) / 8)) *
+ end_addr = start_addr + ((priv->vl_col * (VNBITS(priv->vl_bpix) / 8)) *
priv->vl_row);
writel(start_addr, (unsigned int)®->vidw00add0b0 +
@@ -134,7 +200,7 @@ static void exynos_fimd_set_buffer_address(struct vidinfo *priv,
EXYNOS_BUFFER_OFFSET(win_id));
}
-static void exynos_fimd_set_clock(struct vidinfo *priv)
+static void exynos_fimd_set_clock(struct exynos_fb_priv *priv)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0, div = 0, remainder, remainder_div;
@@ -188,7 +254,7 @@ static void exynos_fimd_set_clock(struct vidinfo *priv)
writel(cfg, ®->vidcon0);
}
-void exynos_set_trigger(struct vidinfo *priv)
+void exynos_set_trigger(struct exynos_fb_priv *priv)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -200,7 +266,7 @@ void exynos_set_trigger(struct vidinfo *priv)
writel(cfg, ®->trigcon);
}
-int exynos_is_i80_frame_done(struct vidinfo *priv)
+int exynos_is_i80_frame_done(struct exynos_fb_priv *priv)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -215,7 +281,7 @@ int exynos_is_i80_frame_done(struct vidinfo *priv)
return status;
}
-static void exynos_fimd_lcd_on(struct vidinfo *priv)
+static void exynos_fimd_lcd_on(struct exynos_fb_priv *priv)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -226,7 +292,8 @@ static void exynos_fimd_lcd_on(struct vidinfo *priv)
writel(cfg, ®->vidcon0);
}
-static void exynos_fimd_window_on(struct vidinfo *priv, unsigned int win_id)
+static void exynos_fimd_window_on(struct exynos_fb_priv *priv,
+ unsigned int win_id)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -243,7 +310,7 @@ static void exynos_fimd_window_on(struct vidinfo *priv, unsigned int win_id)
writel(cfg, ®->winshmap);
}
-void exynos_fimd_lcd_off(struct vidinfo *priv)
+void exynos_fimd_lcd_off(struct exynos_fb_priv *priv)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -253,7 +320,7 @@ void exynos_fimd_lcd_off(struct vidinfo *priv)
writel(cfg, ®->vidcon0);
}
-void exynos_fimd_window_off(struct vidinfo *priv, unsigned int win_id)
+void exynos_fimd_window_off(struct exynos_fb_priv *priv, unsigned int win_id)
{
struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0;
@@ -307,24 +374,16 @@ void exynos_fimd_disable_sysmmu(void)
}
}
-void exynos_fimd_lcd_init(struct vidinfo *priv, ulong lcd_base_address)
+void exynos_fimd_lcd_init(struct udevice *dev)
{
- struct exynos_fb *reg;
+ struct exynos_fb_priv *priv = dev_get_priv(dev);
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct exynos_fb *reg = priv->reg;
unsigned int cfg = 0, rgb_mode;
unsigned int offset;
unsigned int node;
- node = fdtdec_next_compatible(gd->fdt_blob,
- 0, COMPAT_SAMSUNG_EXYNOS_FIMD);
- if (node <= 0)
- debug("exynos_fb: Can't get device node for fimd\n");
-
- reg = (struct exynos_fb *)fdtdec_get_addr(gd->fdt_blob, node,
- "reg");
- if (reg == NULL)
- debug("Can't get the FIMD base address\n");
- priv->reg = reg;
-
+ node = dev->of_offset;
if (fdtdec_get_bool(gd->fdt_blob, node, "samsung,disable-sysmmu"))
exynos_fimd_disable_sysmmu();
@@ -387,13 +446,13 @@ void exynos_fimd_lcd_init(struct vidinfo *priv, ulong lcd_base_address)
exynos_fimd_set_par(priv, priv->win_id);
/* set memory address */
- exynos_fimd_set_buffer_address(priv, priv->win_id, lcd_base_address);
+ exynos_fimd_set_buffer_address(priv, priv->win_id, plat->base);
/* set buffer size */
cfg = EXYNOS_VIDADDR_PAGEWIDTH(priv->vl_col *
- NBITS(priv->vl_bpix) / 8) |
+ VNBITS(priv->vl_bpix) / 8) |
EXYNOS_VIDADDR_PAGEWIDTH_E(priv->vl_col *
- NBITS(priv->vl_bpix) / 8) |
+ VNBITS(priv->vl_bpix) / 8) |
EXYNOS_VIDADDR_OFFSIZE(0) |
EXYNOS_VIDADDR_OFFSIZE_E(0);
@@ -415,26 +474,9 @@ void exynos_fimd_lcd_init(struct vidinfo *priv, ulong lcd_base_address)
exynos_fimd_set_dp_clkcon(priv, priv->dp_enabled);
}
-unsigned long exynos_fimd_calc_fbsize(struct vidinfo *priv)
-{
- return priv->vl_col * priv->vl_row * (NBITS(priv->vl_bpix) / 8);
-}
-
-ushort *configuration_get_cmap(void)
-{
-#if defined(CONFIG_LCD_LOGO)
- return bmp_logo_palette;
-#else
- return NULL;
-#endif
-}
-
-static void exynos_lcd_init(struct vidinfo *vid, ulong lcd_base)
+unsigned long exynos_fimd_calc_fbsize(struct exynos_fb_priv *priv)
{
- exynos_fimd_lcd_init(vid, lcd_base);
-
- /* Enable flushing after LCD writes if requested */
- lcd_set_flush_dcache(1);
+ return priv->vl_col * priv->vl_row * (VNBITS(priv->vl_bpix) / 8);
}
__weak void exynos_cfg_lcd_gpio(void)
@@ -470,217 +512,242 @@ __weak int exynos_lcd_misc_init(struct vidinfo *vid)
return 0;
}
-static void lcd_panel_on(struct vidinfo *vid)
+int exynos_fb_ofdata_to_platdata(struct udevice *dev)
{
- struct gpio_desc pwm_out_gpio;
- struct gpio_desc bl_en_gpio;
- unsigned int node;
-
- udelay(vid->init_delay);
-
- exynos_backlight_reset();
-
- exynos_cfg_lcd_gpio();
-
- exynos_lcd_power_on();
-
- udelay(vid->power_on_delay);
-
- if (vid->dp_enabled)
- exynos_init_dp();
-
- exynos_reset_lcd();
-
- udelay(vid->reset_delay);
-
- exynos_backlight_on(1);
-
- node = fdtdec_next_compatible(gd->fdt_blob, 0,
- COMPAT_SAMSUNG_EXYNOS_FIMD);
- if (node <= 0) {
- debug("FIMD: Can't get device node for FIMD\n");
- return;
- }
- gpio_request_by_name_nodev(gd->fdt_blob, node, "samsung,pwm-out-gpio",
- 0, &pwm_out_gpio,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
-
- gpio_request_by_name_nodev(gd->fdt_blob, node, "samsung,bl-en-gpio", 0,
- &bl_en_gpio,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
-
- exynos_cfg_ldo();
+ struct exynos_fb_priv *priv = dev_get_priv(dev);
+ unsigned int node = dev->of_offset;
+ const void *blob = gd->fdt_blob;
+ fdt_addr_t addr;
- exynos_enable_ldo(1);
-
- if (vid->mipi_enabled)
- exynos_mipi_dsi_init(panel_info.dsim_platform_data_dt);
-}
-
-int exynos_lcd_early_init(const void *blob)
-{
- unsigned int node;
- node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_FIMD);
- if (node <= 0) {
- debug("exynos_fb: Can't get device node for fimd\n");
- return -ENODEV;
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("Can't get the FIMD base address\n");
+ return -EINVAL;
}
+ priv->reg = (struct exynos_fb *)addr;
- panel_info.vl_col = fdtdec_get_int(blob, node, "samsung,vl-col", 0);
- if (panel_info.vl_col == 0) {
+ priv->vl_col = fdtdec_get_int(blob, node, "samsung,vl-col", 0);
+ if (priv->vl_col == 0) {
debug("Can't get XRES\n");
return -ENXIO;
}
- panel_info.vl_row = fdtdec_get_int(blob, node, "samsung,vl-row", 0);
- if (panel_info.vl_row == 0) {
+ priv->vl_row = fdtdec_get_int(blob, node, "samsung,vl-row", 0);
+ if (priv->vl_row == 0) {
debug("Can't get YRES\n");
return -ENXIO;
}
- panel_info.vl_width = fdtdec_get_int(blob, node,
+ priv->vl_width = fdtdec_get_int(blob, node,
"samsung,vl-width", 0);
- panel_info.vl_height = fdtdec_get_int(blob, node,
+ priv->vl_height = fdtdec_get_int(blob, node,
"samsung,vl-height", 0);
- panel_info.vl_freq = fdtdec_get_int(blob, node, "samsung,vl-freq", 0);
- if (panel_info.vl_freq == 0) {
+ priv->vl_freq = fdtdec_get_int(blob, node, "samsung,vl-freq", 0);
+ if (priv->vl_freq == 0) {
debug("Can't get refresh rate\n");
return -ENXIO;
}
if (fdtdec_get_bool(blob, node, "samsung,vl-clkp"))
- panel_info.vl_clkp = CONFIG_SYS_LOW;
+ priv->vl_clkp = VIDEO_ACTIVE_LOW;
if (fdtdec_get_bool(blob, node, "samsung,vl-oep"))
- panel_info.vl_oep = CONFIG_SYS_LOW;
+ priv->vl_oep = VIDEO_ACTIVE_LOW;
if (fdtdec_get_bool(blob, node, "samsung,vl-hsp"))
- panel_info.vl_hsp = CONFIG_SYS_LOW;
+ priv->vl_hsp = VIDEO_ACTIVE_LOW;
if (fdtdec_get_bool(blob, node, "samsung,vl-vsp"))
- panel_info.vl_vsp = CONFIG_SYS_LOW;
+ priv->vl_vsp = VIDEO_ACTIVE_LOW;
if (fdtdec_get_bool(blob, node, "samsung,vl-dp"))
- panel_info.vl_dp = CONFIG_SYS_LOW;
+ priv->vl_dp = VIDEO_ACTIVE_LOW;
- panel_info.vl_bpix = fdtdec_get_int(blob, node, "samsung,vl-bpix", 0);
- if (panel_info.vl_bpix == 0) {
+ priv->vl_bpix = fdtdec_get_int(blob, node, "samsung,vl-bpix", 0);
+ if (priv->vl_bpix == 0) {
debug("Can't get bits per pixel\n");
return -ENXIO;
}
- panel_info.vl_hspw = fdtdec_get_int(blob, node, "samsung,vl-hspw", 0);
- if (panel_info.vl_hspw == 0) {
+ priv->vl_hspw = fdtdec_get_int(blob, node, "samsung,vl-hspw", 0);
+ if (priv->vl_hspw == 0) {
debug("Can't get hsync width\n");
return -ENXIO;
}
- panel_info.vl_hfpd = fdtdec_get_int(blob, node, "samsung,vl-hfpd", 0);
- if (panel_info.vl_hfpd == 0) {
+ priv->vl_hfpd = fdtdec_get_int(blob, node, "samsung,vl-hfpd", 0);
+ if (priv->vl_hfpd == 0) {
debug("Can't get right margin\n");
return -ENXIO;
}
- panel_info.vl_hbpd = (u_char)fdtdec_get_int(blob, node,
+ priv->vl_hbpd = (u_char)fdtdec_get_int(blob, node,
"samsung,vl-hbpd", 0);
- if (panel_info.vl_hbpd == 0) {
+ if (priv->vl_hbpd == 0) {
debug("Can't get left margin\n");
return -ENXIO;
}
- panel_info.vl_vspw = (u_char)fdtdec_get_int(blob, node,
+ priv->vl_vspw = (u_char)fdtdec_get_int(blob, node,
"samsung,vl-vspw", 0);
- if (panel_info.vl_vspw == 0) {
+ if (priv->vl_vspw == 0) {
debug("Can't get vsync width\n");
return -ENXIO;
}
- panel_info.vl_vfpd = fdtdec_get_int(blob, node,
+ priv->vl_vfpd = fdtdec_get_int(blob, node,
"samsung,vl-vfpd", 0);
- if (panel_info.vl_vfpd == 0) {
+ if (priv->vl_vfpd == 0) {
debug("Can't get lower margin\n");
return -ENXIO;
}
- panel_info.vl_vbpd = fdtdec_get_int(blob, node, "samsung,vl-vbpd", 0);
- if (panel_info.vl_vbpd == 0) {
+ priv->vl_vbpd = fdtdec_get_int(blob, node, "samsung,vl-vbpd", 0);
+ if (priv->vl_vbpd == 0) {
debug("Can't get upper margin\n");
return -ENXIO;
}
- panel_info.vl_cmd_allow_len = fdtdec_get_int(blob, node,
+ priv->vl_cmd_allow_len = fdtdec_get_int(blob, node,
"samsung,vl-cmd-allow-len", 0);
- panel_info.win_id = fdtdec_get_int(blob, node, "samsung,winid", 0);
- panel_info.init_delay = fdtdec_get_int(blob, node,
+ priv->win_id = fdtdec_get_int(blob, node, "samsung,winid", 0);
+ priv->init_delay = fdtdec_get_int(blob, node,
"samsung,init-delay", 0);
- panel_info.power_on_delay = fdtdec_get_int(blob, node,
+ priv->power_on_delay = fdtdec_get_int(blob, node,
"samsung,power-on-delay", 0);
- panel_info.reset_delay = fdtdec_get_int(blob, node,
+ priv->reset_delay = fdtdec_get_int(blob, node,
"samsung,reset-delay", 0);
- panel_info.interface_mode = fdtdec_get_int(blob, node,
+ priv->interface_mode = fdtdec_get_int(blob, node,
"samsung,interface-mode", 0);
- panel_info.mipi_enabled = fdtdec_get_int(blob, node,
+ priv->mipi_enabled = fdtdec_get_int(blob, node,
"samsung,mipi-enabled", 0);
- panel_info.dp_enabled = fdtdec_get_int(blob, node,
+ priv->dp_enabled = fdtdec_get_int(blob, node,
"samsung,dp-enabled", 0);
- panel_info.cs_setup = fdtdec_get_int(blob, node,
+ priv->cs_setup = fdtdec_get_int(blob, node,
"samsung,cs-setup", 0);
- panel_info.wr_setup = fdtdec_get_int(blob, node,
+ priv->wr_setup = fdtdec_get_int(blob, node,
"samsung,wr-setup", 0);
- panel_info.wr_act = fdtdec_get_int(blob, node, "samsung,wr-act", 0);
- panel_info.wr_hold = fdtdec_get_int(blob, node, "samsung,wr-hold", 0);
+ priv->wr_act = fdtdec_get_int(blob, node, "samsung,wr-act", 0);
+ priv->wr_hold = fdtdec_get_int(blob, node, "samsung,wr-hold", 0);
- panel_info.logo_on = fdtdec_get_int(blob, node, "samsung,logo-on", 0);
- if (panel_info.logo_on) {
- panel_info.logo_width = fdtdec_get_int(blob, node,
+ priv->logo_on = fdtdec_get_int(blob, node, "samsung,logo-on", 0);
+ if (priv->logo_on) {
+ priv->logo_width = fdtdec_get_int(blob, node,
"samsung,logo-width", 0);
- panel_info.logo_height = fdtdec_get_int(blob, node,
+ priv->logo_height = fdtdec_get_int(blob, node,
"samsung,logo-height", 0);
- panel_info.logo_addr = fdtdec_get_int(blob, node,
+ priv->logo_addr = fdtdec_get_int(blob, node,
"samsung,logo-addr", 0);
}
- panel_info.rgb_mode = fdtdec_get_int(blob, node,
+ priv->rgb_mode = fdtdec_get_int(blob, node,
"samsung,rgb-mode", 0);
- panel_info.pclk_name = fdtdec_get_int(blob, node,
+ priv->pclk_name = fdtdec_get_int(blob, node,
"samsung,pclk-name", 0);
- panel_info.sclk_div = fdtdec_get_int(blob, node,
+ priv->sclk_div = fdtdec_get_int(blob, node,
"samsung,sclk-div", 0);
- panel_info.dual_lcd_enabled = fdtdec_get_int(blob, node,
+ priv->dual_lcd_enabled = fdtdec_get_int(blob, node,
"samsung,dual-lcd-enabled", 0);
return 0;
}
-void lcd_ctrl_init(void *lcdbase)
+static int exynos_fb_probe(struct udevice *dev)
{
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct exynos_fb_priv *priv = dev_get_priv(dev);
+ struct udevice *panel, *bridge;
+ struct udevice *dp;
+ int ret;
+
+ debug("%s: start\n", __func__);
set_system_display_ctrl();
set_lcd_clk();
#ifdef CONFIG_EXYNOS_MIPI_DSIM
exynos_init_dsim_platform_data(&panel_info);
#endif
- exynos_lcd_misc_init(&panel_info);
+ exynos_fimd_lcd_init(dev);
- exynos_lcd_init(&panel_info, (ulong)lcdbase);
-}
+ ret = uclass_first_device(UCLASS_PANEL, &panel);
+ if (ret) {
+ printf("LCD panel failed to probe\n");
+ return ret;
+ }
+ if (!panel) {
+ printf("LCD panel not found\n");
+ return -ENODEV;
+ }
-void lcd_enable(void)
-{
- if (panel_info.logo_on) {
- memset((void *)gd->fb_base, 0,
- panel_info.vl_width * panel_info.vl_height *
- (NBITS(panel_info.vl_bpix) >> 3));
+ ret = uclass_first_device(UCLASS_DISPLAY, &dp);
+ if (ret) {
+ debug("%s: Display device error %d\n", __func__, ret);
+ return ret;
+ }
+ if (!dev) {
+ debug("%s: Display device missing\n", __func__);
+ return -ENODEV;
+ }
+ ret = display_enable(dp, 18, NULL);
+ if (ret) {
+ debug("%s: Display enable error %d\n", __func__, ret);
+ return ret;
}
- lcd_panel_on(&panel_info);
+ /* backlight / pwm */
+ ret = panel_enable_backlight(panel);
+ if (ret) {
+ debug("%s: backlight error: %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge);
+ if (!ret)
+ ret = video_bridge_set_backlight(bridge, 80);
+ if (ret) {
+ debug("%s: No video bridge, or no backlight on bridge\n",
+ __func__);
+ exynos_pinmux_config(PERIPH_ID_PWM0, 0);
+ }
+
+ uc_priv->xsize = priv->vl_col;
+ uc_priv->ysize = priv->vl_row;
+ uc_priv->bpix = priv->vl_bpix;
+
+ /* Enable flushing after LCD writes if requested */
+ video_set_flush_dcache(dev, true);
+
+ return 0;
}
-/* dummy function */
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+static int exynos_fb_bind(struct udevice *dev)
{
- return;
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+
+ /* This is the maximum panel size we expect to see */
+ plat->size = 1920 * 1080 * 2;
+
+ return 0;
}
+
+static const struct video_ops exynos_fb_ops = {
+};
+
+static const struct udevice_id exynos_fb_ids[] = {
+ { .compatible = "samsung,exynos-fimd" },
+ { }
+};
+
+U_BOOT_DRIVER(exynos_fb) = {
+ .name = "exynos_fb",
+ .id = UCLASS_VIDEO,
+ .of_match = exynos_fb_ids,
+ .ops = &exynos_fb_ops,
+ .bind = exynos_fb_bind,
+ .probe = exynos_fb_probe,
+ .ofdata_to_platdata = exynos_fb_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct exynos_fb_priv),
+};
@@ -86,6 +86,8 @@ static const struct panel_ops simple_panel_ops = {
static const struct udevice_id simple_panel_ids[] = {
{ .compatible = "simple-panel" },
{ .compatible = "auo,b133xtn01" },
+ { .compatible = "auo,b116xw03" },
+ { .compatible = "auo,b133htn01" },
{ }
};
@@ -13,8 +13,8 @@
#undef EXYNOS_DEVICE_SETTINGS
#define EXYNOS_DEVICE_SETTINGS \
"stdin=serial,cros-ec-keyb\0" \
- "stdout=serial,lcd\0" \
- "stderr=serial,lcd\0"
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
#define CONFIG_EXYNOS5_DT
@@ -32,6 +32,7 @@
#define CONFIG_EXYNOS_FB
#define CONFIG_EXYNOS_DP
#define LCD_BPP LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
#endif
/* Enable keyboard */
Update several boards to use driver model for video. This involves changes to the EDP and FIMD (frame buffer) drivers. Existing PWM, simple-panel and pwm-backlight drivers are used. These work without additional configuration since they use the device tree settings in the same way as Linux. Boards converted are: - snow - spring - peach-pit - peach-pi All have been tested. Not converted: - MIPI display driver - s5pc210_universal - smdk5420 - smdk5250 - trats - trats2 Signed-off-by: Simon Glass <sjg@chromium.org> --- arch/arm/mach-exynos/include/mach/dp_info.h | 1 + board/samsung/common/board.c | 15 - configs/peach-pi_defconfig | 3 + configs/peach-pit_defconfig | 3 + configs/snow_defconfig | 3 + configs/spring_defconfig | 3 + drivers/video/exynos/exynos_dp.c | 146 ++++++++-- drivers/video/exynos/exynos_fb.c | 407 ++++++++++++++++------------ drivers/video/simple_panel.c | 2 + include/configs/exynos5-dt-common.h | 5 +- 10 files changed, 373 insertions(+), 215 deletions(-)