diff mbox

[v2] selftests/powerpc: Add test to check is DSCR is corrupted.

Message ID 1449035578-10920-1-git-send-email-rashmicy@gmail.com (mailing list archive)
State Superseded
Headers show

Commit Message

Rashmica Gupta Dec. 2, 2015, 5:52 a.m. UTC
If the transaction is aborted, the DSCR should be rolled back to the
checkpointed value before the transaction began. The value written to the
DSCR when transaction was suspended should only persist if the transaction
is successful.

Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
---
No functional changes. Fixed whitespace and styling issues.

 tools/testing/selftests/powerpc/tm/.gitignore |  1 +
 tools/testing/selftests/powerpc/tm/Makefile   |  2 +-
 tools/testing/selftests/powerpc/tm/tm-dscr.c  | 95 +++++++++++++++++++++++++++
 3 files changed, 97 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/powerpc/tm/tm-dscr.c

Comments

Denis Kirjanov Dec. 2, 2015, 1:09 p.m. UTC | #1
On 12/2/15, Rashmica Gupta <rashmicy@gmail.com> wrote:
> If the transaction is aborted, the DSCR should be rolled back to the
> checkpointed value before the transaction began. The value written to the
> DSCR when transaction was suspended should only persist if the transaction
> is successful.
>
> Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
> ---
> No functional changes. Fixed whitespace and styling issues.
>
>  tools/testing/selftests/powerpc/tm/.gitignore |  1 +
>  tools/testing/selftests/powerpc/tm/Makefile   |  2 +-
>  tools/testing/selftests/powerpc/tm/tm-dscr.c  | 95
> +++++++++++++++++++++++++++
>  3 files changed, 97 insertions(+), 1 deletion(-)
>  create mode 100644 tools/testing/selftests/powerpc/tm/tm-dscr.c
>
> diff --git a/tools/testing/selftests/powerpc/tm/.gitignore
> b/tools/testing/selftests/powerpc/tm/.gitignore
> index d0c7c97e9b13..76eae258feeb 100644
> --- a/tools/testing/selftests/powerpc/tm/.gitignore
> +++ b/tools/testing/selftests/powerpc/tm/.gitignore
> @@ -3,3 +3,4 @@ tm-syscall
>  tm-signal-msr-resv
>  tm-signal-stack
>  tm-fork
> +tm-dscr
> diff --git a/tools/testing/selftests/powerpc/tm/Makefile
> b/tools/testing/selftests/powerpc/tm/Makefile
> index f7d4727662aa..59eec240339d 100644
> --- a/tools/testing/selftests/powerpc/tm/Makefile
> +++ b/tools/testing/selftests/powerpc/tm/Makefile
> @@ -1,4 +1,4 @@
> -TEST_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack
> tm-fork
> +TEST_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack
> tm-fork tm-dscr
>
>  all: $(TEST_PROGS)
>
> diff --git a/tools/testing/selftests/powerpc/tm/tm-dscr.c
> b/tools/testing/selftests/powerpc/tm/tm-dscr.c
> new file mode 100644
> index 000000000000..b18360895496
> --- /dev/null
> +++ b/tools/testing/selftests/powerpc/tm/tm-dscr.c
> @@ -0,0 +1,95 @@
> +/*
> + * Copyright 2015, Michael Neuling, IBM Corp.
> + * Licensed under GPLv2.
> + * Original: Michael Neuling 19/7/2013
> + * Edited: Rashmica Gupta 01/12/2015
> + *
> + * Do some transactions, see if the DSCR is corrupted.
> + * If the transaction is aborted, the DSCR should be rolled back to the
> + * checkpointed value before the transaction began. The value set to DSCR
> + * while the transaction was suspended should only remain there if the
> + * transaction succeeds.
> + *
> + */
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <unistd.h>
> +#include <string.h>
> +
> +#include "tm.h"
> +#include "utils.h"
> +
> +#define SPRN_DSCR	0x3
> +
> +int	num_loops	= 10000;
> +
> +int test_dscr(void)
> +{
> +	int i;
> +
> +	SKIP_IF(!have_htm());
> +
> +	for (i = 0; i < num_loops; i++)
> +	{
> +		uint64_t result = 0;
> +		asm __volatile__(
> +			"li	7, 1;"
> +			"mtspr	%[dscr], 7;"	/* dscr = 1 */
> +			"tbegin.;"
> +			"beq	3f ;"
> +			"li	4, 0x7000;"	/* Loop lots, to use time */
> +			"2:;"		     	/* Start loop */
> +			"li	7, 2;"
> +			"mtspr	%[dscr], 7;"	/* dscr = 2 */
> +			"tsuspend.;"
> +			"li	7, 3;"
> +			"mtspr	%[dscr], 7;"	/* dscr = 3 */
> +			"tresume.;"
> +			"subi	4, 4, 1;"
> +			"cmpdi	4, 0;"
> +			"bne	2b;"
> +			"tend.;"
> +
> +			/* Transaction sucess! DSCR should be 3 */
> +			"mfspr  7, %[dscr];"
> +			"ori	%[res], 7, 4;"	/* res = 3|4 = 7 */
> +			"b	4f;"
> +
> +			/* Abort handler.DSCR should be rolled back to 1 */
> +			"3:;"
> +			"mfspr  7, %[dscr];"
> +			"ori	%[res], 7, 8;"	/* res = 1|8 = 9 */
> +			"4:;"
> +
> +			: [res]"=r"(result)
> +			: [dscr]"i"(SPRN_DSCR)
> +			: "memory", "r0", "r4", "r7");
> +
> +		/* If result is anything else other than 7 or 9, the dscr
> +		* value must have been corrupted. */
> +		if ((result != 7) && (result != 9))
> +			return 1;
> +
> +	}
> +	return 0;
> +}
> +
> +int main(int argc, char *argv[])
> +{
> +
> +	/* A low number of iterations (eg 100) can cause a false pass */
> +	if (argc > 1) {
> +		if (strcmp(argv[1], "-h") == 0) {
> +			printf("Syntax:\n\t%s [<num loops>]\n",
> +			       argv[0]);
> +			return 0;
return 1?
> +		} else {
> +			num_loops = atoi(argv[1]);
> +		}
> +	}
> +
> +	printf("Starting, %d loops\n", num_loops);
> +
> +	test_harness(test_dscr, "tm_dscr");
return test_harness(test_dscr, "tm_dscr");
> +}
> --
> 2.5.0
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
diff mbox

Patch

diff --git a/tools/testing/selftests/powerpc/tm/.gitignore b/tools/testing/selftests/powerpc/tm/.gitignore
index d0c7c97e9b13..76eae258feeb 100644
--- a/tools/testing/selftests/powerpc/tm/.gitignore
+++ b/tools/testing/selftests/powerpc/tm/.gitignore
@@ -3,3 +3,4 @@  tm-syscall
 tm-signal-msr-resv
 tm-signal-stack
 tm-fork
+tm-dscr
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index f7d4727662aa..59eec240339d 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -1,4 +1,4 @@ 
-TEST_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack tm-fork
+TEST_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack tm-fork tm-dscr
 
 all: $(TEST_PROGS)
 
diff --git a/tools/testing/selftests/powerpc/tm/tm-dscr.c b/tools/testing/selftests/powerpc/tm/tm-dscr.c
new file mode 100644
index 000000000000..b18360895496
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-dscr.c
@@ -0,0 +1,95 @@ 
+/*
+ * Copyright 2015, Michael Neuling, IBM Corp.
+ * Licensed under GPLv2.
+ * Original: Michael Neuling 19/7/2013
+ * Edited: Rashmica Gupta 01/12/2015
+ *
+ * Do some transactions, see if the DSCR is corrupted.
+ * If the transaction is aborted, the DSCR should be rolled back to the
+ * checkpointed value before the transaction began. The value set to DSCR
+ * while the transaction was suspended should only remain there if the
+ * transaction succeeds.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+
+#include "tm.h"
+#include "utils.h"
+
+#define SPRN_DSCR	0x3
+
+int	num_loops	= 10000;
+
+int test_dscr(void)
+{
+	int i;
+
+	SKIP_IF(!have_htm());
+
+	for (i = 0; i < num_loops; i++)
+	{
+		uint64_t result = 0;
+		asm __volatile__(
+			"li	7, 1;"
+			"mtspr	%[dscr], 7;"	/* dscr = 1 */
+			"tbegin.;"
+			"beq	3f ;"
+			"li	4, 0x7000;"	/* Loop lots, to use time */
+			"2:;"		     	/* Start loop */
+			"li	7, 2;"
+			"mtspr	%[dscr], 7;"	/* dscr = 2 */
+			"tsuspend.;"
+			"li	7, 3;"
+			"mtspr	%[dscr], 7;"	/* dscr = 3 */
+			"tresume.;"
+			"subi	4, 4, 1;"
+			"cmpdi	4, 0;"
+			"bne	2b;"
+			"tend.;"
+
+			/* Transaction sucess! DSCR should be 3 */
+			"mfspr  7, %[dscr];"
+			"ori	%[res], 7, 4;"	/* res = 3|4 = 7 */
+			"b	4f;"
+
+			/* Abort handler.DSCR should be rolled back to 1 */
+			"3:;"
+			"mfspr  7, %[dscr];"
+			"ori	%[res], 7, 8;"	/* res = 1|8 = 9 */
+			"4:;"
+
+			: [res]"=r"(result)
+			: [dscr]"i"(SPRN_DSCR)
+			: "memory", "r0", "r4", "r7");
+
+		/* If result is anything else other than 7 or 9, the dscr
+		* value must have been corrupted. */
+		if ((result != 7) && (result != 9))
+			return 1;
+
+	}
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+
+	/* A low number of iterations (eg 100) can cause a false pass */
+	if (argc > 1) {
+		if (strcmp(argv[1], "-h") == 0) {
+			printf("Syntax:\n\t%s [<num loops>]\n",
+			       argv[0]);
+			return 0;
+		} else {
+			num_loops = atoi(argv[1]);
+		}
+	}
+
+	printf("Starting, %d loops\n", num_loops);
+
+	test_harness(test_dscr, "tm_dscr");
+}