diff mbox

[U-Boot] ARM: BeagleBoard-x15: Rev A2x5: Change UART3 mux

Message ID 1431083188-31061-1-git-send-email-lokeshvutla@ti.com
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Lokesh Vutla May 8, 2015, 11:06 a.m. UTC 
UART3 RX and TX pins are now moved to support uart download capability
on the platform. Old pins are now GPIOs routed to expansion ports.
All original boards should either have been returned for modifications
or already modified for the required change and maintaining
compatibility for older boards are no longer needed.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
 board/ti/beagle_x15/mux_data.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Tom Rini May 28, 2015, 1:23 p.m. UTC | #1 
On Fri, May 08, 2015 at 04:36:28PM +0530, Lokesh Vutla wrote:

> UART3 RX and TX pins are now moved to support uart download capability
> on the platform. Old pins are now GPIOs routed to expansion ports.
> All original boards should either have been returned for modifications
> or already modified for the required change and maintaining
> compatibility for older boards are no longer needed.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
> Signed-off-by: Nishanth Menon <nm at ti.com>

Applied to u-boot/master, thanks!
diff mbox

Patch

diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h
index 2294abe..df658c5 100644
--- a/board/ti/beagle_x15/mux_data.h
+++ b/board/ti/beagle_x15/mux_data.h
@@ -31,8 +31,8 @@  const struct pad_conf_entry core_padconf_array_essential[] = {
 	{GPMC_A26, (IEN | PTU | PDIS | M1)},	/* mmc2_dat2 */
 	{GPMC_A27, (IEN | PTU | PDIS | M1)},	/* mmc2_dat3 */
 	{GPMC_CS1, (IEN | PTU | PDIS | M1)},	/* mmm2_cmd */
-	{UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
-	{UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
+	{UART2_CTSN, (FSC | IEN | PTU | PDIS | M2)}, /* uart2_ctsn.uart3_rxd */
+	{UART2_RTSN, (FSC | IEN | PTU | PDIS | M1)}, /* uart2_rtsn.uart3_txd */
 	{I2C1_SDA, (IEN | PTU | PDIS | M0)},	/* I2C1_SDA */
 	{I2C1_SCL, (IEN | PTU | PDIS | M0)},	/* I2C1_SCL */
 	{MDIO_MCLK, (PTU | PEN | M0)},		/* MDIO_MCLK  */