diff mbox

[U-Boot,V3,4/8] video: parade: configure SLP and RST GPIOs if specified in DT

Message ID 1425476131-28306-5-git-send-email-ajaykumar.rs@samsung.com
State Accepted
Delegated to: Minkyu Kang
Headers show

Commit Message

Ajay Kumar March 4, 2015, 1:35 p.m. UTC 
Add support to configure EDP_RST GPIO and EDP_SLP GPIO,
if provided in parade DT node.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
---
 drivers/video/parade.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox

Patch

diff --git a/drivers/video/parade.c b/drivers/video/parade.c
index 0f543f6..ae50971 100644
--- a/drivers/video/parade.c
+++ b/drivers/video/parade.c
@@ -12,6 +12,7 @@ 
 #include <common.h>
 #include <i2c.h>
 #include <fdtdec.h>
+#include <asm/gpio.h>
 
 /*
  * Initialization of the chip is a process of writing certaing values into
@@ -180,6 +181,8 @@  static int parade_write_regs(int base_addr, const struct reg_data *table)
 
 int parade_init(const void *blob)
 {
+	struct gpio_desc rst_gpio;
+	struct gpio_desc slp_gpio;
 	int bus, old_bus;
 	int parent;
 	int node;
@@ -201,6 +204,14 @@  int parade_init(const void *blob)
 		return -1;
 	}
 
+	gpio_request_by_name_nodev(blob, node, "sleep-gpio", 0, &slp_gpio,
+				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+
+	mdelay(10);
+
+	gpio_request_by_name_nodev(blob, node, "reset-gpio", 0, &rst_gpio,
+				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+
 	bus = i2c_get_bus_num_fdt(parent);
 	old_bus = i2c_get_bus_num();