| Message ID | 1410925884-8767-12-git-send-email-sjg@chromium.org |
|---|---|
| State | Superseded |
| Delegated to: | Simon Glass |
| Headers | show |
On 09/17/14 06:51, Simon Glass wrote: > Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an > example. > > Signed-off-by: Simon Glass <sjg@chromium.org> Thanks for doing this. Acked-by: Igor Grinberg <grinberg@compulab.co.il> > --- > > Changes in v2: > - Use the correct namespace for the platform data > > board/compulab/cm_fx6/cm_fx6.c | 10 ++++++++++ > include/configs/cm_fx6.h | 11 +++++++++++ > 2 files changed, 21 insertions(+) > > diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c > index 10e31b6..d79cd5f 100644 > --- a/board/compulab/cm_fx6/cm_fx6.c > +++ b/board/compulab/cm_fx6/cm_fx6.c > @@ -9,11 +9,13 @@ > */ > > #include <common.h> > +#include <dm.h> > #include <fsl_esdhc.h> > #include <miiphy.h> > #include <netdev.h> > #include <fdt_support.h> > #include <sata.h> > +#include <serial_mxc.h> > #include <asm/arch/crm_regs.h> > #include <asm/arch/sys_proto.h> > #include <asm/arch/iomux.h> > @@ -509,3 +511,11 @@ u32 get_board_rev(void) > return cl_eeprom_get_board_rev(); > } > > +static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = { > + .reg = (struct mxc_uart *)UART4_BASE, > +}; > + > +U_BOOT_DEVICE(cm_fx6_serial) = { > + .name = "serial_mxc", > + .platdata = &cm_fx6_mxc_serial_plat, > +}; > diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h > index 10d02b4..1f55150 100644 > --- a/include/configs/cm_fx6.h > +++ b/include/configs/cm_fx6.h > @@ -21,6 +21,17 @@ > #define CONFIG_MACH_TYPE 4273 > #define CONFIG_SYS_HZ 1000 > > +#ifndef CONFIG_SPL_BUILD > +#define CONFIG_DM > +#define CONFIG_CMD_DM > + > +#define CONFIG_DM_GPIO > +#define CONFIG_CMD_GPIO > + > +#define CONFIG_DM_SERIAL > +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) > +#endif > + > /* Display information on boot */ > #define CONFIG_DISPLAY_CPUINFO > #define CONFIG_DISPLAY_BOARDINFO >
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 10e31b6..d79cd5f 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -9,11 +9,13 @@ */ #include <common.h> +#include <dm.h> #include <fsl_esdhc.h> #include <miiphy.h> #include <netdev.h> #include <fdt_support.h> #include <sata.h> +#include <serial_mxc.h> #include <asm/arch/crm_regs.h> #include <asm/arch/sys_proto.h> #include <asm/arch/iomux.h> @@ -509,3 +511,11 @@ u32 get_board_rev(void) return cl_eeprom_get_board_rev(); } +static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = { + .reg = (struct mxc_uart *)UART4_BASE, +}; + +U_BOOT_DEVICE(cm_fx6_serial) = { + .name = "serial_mxc", + .platdata = &cm_fx6_mxc_serial_plat, +}; diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 10d02b4..1f55150 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,6 +21,17 @@ #define CONFIG_MACH_TYPE 4273 #define CONFIG_SYS_HZ 1000 +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM +#define CONFIG_CMD_DM + +#define CONFIG_DM_GPIO +#define CONFIG_CMD_GPIO + +#define CONFIG_DM_SERIAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif + /* Display information on boot */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO
Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an example. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v2: - Use the correct namespace for the platform data board/compulab/cm_fx6/cm_fx6.c | 10 ++++++++++ include/configs/cm_fx6.h | 11 +++++++++++ 2 files changed, 21 insertions(+)