Message ID | 1407476151-5603-9-git-send-email-tharvey@gateworks.com |
---|---|
State | Awaiting Upstream |
Delegated to: | Stefano Babic |
Headers | show |
Hi Tim, On 08/08/2014 07:35, Tim Harvey wrote: > The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was > added to the GW53xx on revB PCB's). Additionally, remove the duplicate > config for GW54xx. > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > board/gateworks/gw_ventana/gw_ventana.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c > index 54e582b..98ee9df 100644 > --- a/board/gateworks/gw_ventana/gw_ventana.c > +++ b/board/gateworks/gw_ventana/gw_ventana.c > @@ -609,6 +609,8 @@ static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { > IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), > /* IOEXP_IRQ# */ > IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), > + /* DIOI2C_DIS# */ > + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), > > /* MX6_LOCLED# */ > IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), > @@ -637,8 +639,6 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { > IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)), > /* DIOI2C_DIS# */ > IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), > - /* DIOI2C_DIS# */ > - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), > /* PCICK_SSON */ > IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), > /* PCI_RST# */ > Applied to u-boot-imx, thanks ! Best regards, Stefano Babic
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 54e582b..98ee9df 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -609,6 +609,8 @@ static iomux_v3_cfg_t const gw53xx_gpio_pads[] = { IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* IOEXP_IRQ# */ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), + /* DIOI2C_DIS# */ + IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* MX6_LOCLED# */ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), @@ -637,8 +639,6 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* DIOI2C_DIS# */ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), - /* DIOI2C_DIS# */ - IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* PCICK_SSON */ IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* PCI_RST# */
The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was added to the GW53xx on revB PCB's). Additionally, remove the duplicate config for GW54xx. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- board/gateworks/gw_ventana/gw_ventana.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)