| Message ID | 1369154510-4927-11-git-send-email-sebastian.hesselbarth@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e9647b8..8db388a 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -66,12 +66,10 @@ static void __init kirkwood_legacy_clk_init(void) */ clkspec.args[0] = CGC_BIT_GE0; clk = of_clk_get_from_provider(&clkspec); - orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); clk_prepare_enable(clk); clkspec.args[0] = CGC_BIT_GE1; clk = of_clk_get_from_provider(&clkspec); - orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); clk_prepare_enable(clk); }
With all boards converted to DT enabled mv643xx_eth we can now remove the clock alias for gbe clocks. The workaround for ge0/ge1 clock gates is not removed, as Kirkwood ethernet controllers loose MAC address stored in internal registers on gated ge0/ge1 clocks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Note: I confirm that the above workaround is still required, i.e. when booting DT kernel with non-DT boot loader (no local-mac-address property) MAC address registers looses its content on clock gating. Cc: David Miller <davem@davemloft.net> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org --- arch/arm/mach-kirkwood/board-dt.c | 2 -- 1 file changed, 2 deletions(-)