diff mbox

[U-Boot,21/31] powerpc/t4240qds: fix PHY reset timeout issue

Message ID 1363973369-26110-21-git-send-email-yorksun@freescale.com
State Superseded
Headers show

Commit Message

York Sun March 22, 2013, 5:29 p.m. UTC 
From: Shengzhou Liu <Shengzhou.Liu@freescale.com>

QSGMII card has different PHY address against previous SGMII card.
We check the type of card in slots and set correct PHY address to
avoid complainning "PHY reset timed out" during u-boot booting up.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
---
 board/freescale/t4qds/eth.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index ec0afce..316f7dc 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -365,24 +365,40 @@  static void initialize_qsgmiiphy_fix(void)
 			qsgmiiphy_fix[FM1_DTSEC6] = 1;
 			qsgmiiphy_fix[FM1_DTSEC9] = 1;
 			qsgmiiphy_fix[FM1_DTSEC10] = 1;
+			slot_qsgmii_phyaddr[1][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[1][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[1][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[1][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		case 2:
 			qsgmiiphy_fix[FM1_DTSEC1] = 1;
 			qsgmiiphy_fix[FM1_DTSEC2] = 1;
 			qsgmiiphy_fix[FM1_DTSEC3] = 1;
 			qsgmiiphy_fix[FM1_DTSEC4] = 1;
+			slot_qsgmii_phyaddr[2][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[2][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[2][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[2][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		case 3:
 			qsgmiiphy_fix[FM2_DTSEC5] = 1;
 			qsgmiiphy_fix[FM2_DTSEC6] = 1;
 			qsgmiiphy_fix[FM2_DTSEC9] = 1;
 			qsgmiiphy_fix[FM2_DTSEC10] = 1;
+			slot_qsgmii_phyaddr[3][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[3][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[3][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[3][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		case 4:
 			qsgmiiphy_fix[FM2_DTSEC1] = 1;
 			qsgmiiphy_fix[FM2_DTSEC2] = 1;
 			qsgmiiphy_fix[FM2_DTSEC3] = 1;
 			qsgmiiphy_fix[FM2_DTSEC4] = 1;
+			slot_qsgmii_phyaddr[4][0] =  SGMII_CARD_PORT1_PHY_ADDR;
+			slot_qsgmii_phyaddr[4][1] =  SGMII_CARD_PORT2_PHY_ADDR;
+			slot_qsgmii_phyaddr[4][2] =  SGMII_CARD_PORT3_PHY_ADDR;
+			slot_qsgmii_phyaddr[4][3] =  SGMII_CARD_PORT4_PHY_ADDR;
 			break;
 		default:
 			break;
@@ -435,6 +451,7 @@  int board_eth_init(bd_t *bis)
 	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
 	t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
 
+	initialize_qsgmiiphy_fix();
 
 	switch (srds_prtcl_s1) {
 	case 1:
@@ -702,8 +719,6 @@  int board_eth_init(bd_t *bis)
 	}
 #endif /* CONFIG_SYS_NUM_FMAN */
 
-	initialize_qsgmiiphy_fix();
-
 	cpu_eth_init(bis);
 #endif /* CONFIG_FMAN_ENET */