@@ -48,6 +48,27 @@
unsigned int emac_dbg = 0;
#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
+#ifdef EMAC_HW_RAM_ADDR
+static inline unsigned long BD_TO_HW(unsigned long x)
+{
+ if (x == 0)
+ return 0;
+
+ return x - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR;
+}
+
+static inline unsigned long HW_TO_BD(unsigned long x)
+{
+ if (x == 0)
+ return 0;
+
+ return x - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR;
+}
+#else
+#define BD_TO_HW(x) (x)
+#define HW_TO_BD(x) (x)
+#endif
+
#ifdef DAVINCI_EMAC_GIG_ENABLE
#define emac_gigabit_enable(phy_addr) davinci_eth_gigabit_enable(phy_addr)
#else
@@ -448,7 +469,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
/* Create RX queue and set receive process in place */
emac_rx_active_head = emac_rx_desc;
for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
- rx_desc->next = (u_int32_t)(rx_desc + 1);
+ rx_desc->next = BD_TO_HW((u_int32_t)(rx_desc + 1));
rx_desc->buffer = &emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
@@ -501,7 +522,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
emac_gigabit_enable(active_phy_addr[index]);
/* Start receive process */
- writel((u_int32_t)emac_rx_desc, &adap_emac->RX0HDP);
+ writel(BD_TO_HW((u_int32_t)emac_rx_desc), &adap_emac->RX0HDP);
debug_emac("- emac_open\n");
@@ -619,7 +640,7 @@ static int davinci_eth_send_packet (struct eth_device *dev,
EMAC_CPPI_OWNERSHIP_BIT |
EMAC_CPPI_EOP_BIT);
/* Send the packet */
- writel((unsigned long)emac_tx_desc, &adap_emac->TX0HDP);
+ writel(BD_TO_HW((unsigned long)emac_tx_desc), &adap_emac->TX0HDP);
/* Wait for packet to complete or link down */
while (1) {
@@ -663,14 +684,14 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
}
/* Ack received packet descriptor */
- writel((unsigned long)rx_curr_desc, &adap_emac->RX0CP);
+ writel(BD_TO_HW((ulong)rx_curr_desc), &adap_emac->RX0CP);
curr_desc = rx_curr_desc;
emac_rx_active_head =
- (volatile emac_desc *) rx_curr_desc->next;
+ (volatile emac_desc *) (HW_TO_BD(rx_curr_desc->next));
if (status & EMAC_CPPI_EOQ_BIT) {
if (emac_rx_active_head) {
- writel((unsigned long)emac_rx_active_head,
+ writel(BD_TO_HW((ulong)emac_rx_active_head),
&adap_emac->RX0HDP);
} else {
emac_rx_queue_active = 0;
@@ -688,7 +709,7 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
emac_rx_active_head = curr_desc;
emac_rx_active_tail = curr_desc;
if (emac_rx_queue_active != 0) {
- writel((unsigned long)emac_rx_active_head,
+ writel(BD_TO_HW((ulong)emac_rx_active_head),
&adap_emac->RX0HDP);
printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
emac_rx_queue_active = 1;
@@ -696,10 +717,10 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
} else {
tail_desc = emac_rx_active_tail;
emac_rx_active_tail = curr_desc;
- tail_desc->next = (unsigned int) curr_desc;
+ tail_desc->next = BD_TO_HW((ulong) curr_desc);
status = tail_desc->pkt_flag_len;
if (status & EMAC_CPPI_EOQ_BIT) {
- writel((unsigned long)curr_desc,
+ writel(BD_TO_HW((ulong)curr_desc),
&adap_emac->RX0HDP);
status &= ~EMAC_CPPI_EOQ_BIT;
tail_desc->pkt_flag_len = status;
On AM35xx CPPI RAM had different addresses when accessed from the CPU and from the EMAC. We need to account this to deal with the buffer descriptors correctly. Signed-off-by: Ilya Yanok <yanok@emcraft.com> --- drivers/net/davinci_emac.c | 39 ++++++++++++++++++++++++++++++--------- 1 files changed, 30 insertions(+), 9 deletions(-)