@@ -10,13 +10,13 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
for arg in "$@"
do
case "${arg}" in
- --add-pi3-miniuart-bt-overlay)
+ --add-miniuart-bt-overlay)
if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
- echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
+ echo "Adding 'dtoverlay=miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
-# fixes rpi3 ttyAMA0 serial console
-dtoverlay=pi3-miniuart-bt
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
__EOF__
fi
;;
@@ -78,7 +78,7 @@ After building, you should obtain this tree:
[1] Not all of them will be present, depending on the RaspberryPi
model you are using.
-[2] Only for the Raspberry Pi 3/4 Models (overlay pi3-miniuart-bt is needed
+[2] Only for the Raspberry Pi 3/4 Models (overlay miniuart-bt is needed
to enable the RPi3 serial console otherwise occupied by the bluetooth
chip). Alternative would be to disable the serial console in cmdline.txt
and /etc/inittab.
@@ -35,4 +35,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-pi3-miniuart-bt-overlay"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-miniuart-bt-overlay"
@@ -34,4 +34,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
@@ -48,4 +48,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="360M"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay --gpu_mem_1024=200"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay --gpu_mem_1024=200"
@@ -35,4 +35,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-miniuart-bt-overlay"
This option will be used in RPI4 config in order to have a working serial port on gpios. This change makes this option not only RPI3 specific. Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr> --- board/raspberrypi/post-image.sh | 8 ++++---- board/raspberrypi/readme.txt | 2 +- configs/raspberrypi3_64_defconfig | 2 +- configs/raspberrypi3_defconfig | 2 +- configs/raspberrypi3_qt5we_defconfig | 2 +- configs/raspberrypi4_defconfig | 2 +- 6 files changed, 9 insertions(+), 9 deletions(-)