[U-Boot] configs: spi: Miss the SPI_FLASH_BAR for ESPI

Miss the SPI_FLASH_BAR for the ESPI controller of FSL.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
 drivers/spi/Kconfig | 1 +
 1 file changed, 1 insertion(+)

>-----Original Message-----
>From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Xiaowei Bao
>Sent: Monday, October 21, 2019 2:32 PM
>To: Jagdish Gediya <jagdish.gediya@nxp.com>; jagan@amarulasolutions.com;
>u-boot@lists.denx.de
>Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
>Subject: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR for ESPI
configs: spi:  -> spi: Kconfig

I understand you are adding config, because you have missed it earlier.
But better would be something like Miss->Add 

ESPI -> FSL_ESPI
>
>Miss the SPI_FLASH_BAR for the ESPI controller of FSL.
>
>Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
>---
> drivers/spi/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
>diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index b8ca2bd..7003569
>100644
>--- a/drivers/spi/Kconfig
>+++ b/drivers/spi/Kconfig
>@@ -367,6 +367,7 @@ config CF_SPI
>
> config FSL_ESPI
> 	bool "Freescale eSPI driver"
>+	imply SPI_FLASH_BAR
> 	help
> 	  Enable the Freescale eSPI driver. This driver can be used to
> 	  access the SPI interface and SPI NOR flash on platforms embedding
>--

--priyankajain

> -----Original Message-----
> From: Priyanka Jain <priyanka.jain@nxp.com>
> Sent: 2019年10月22日 17:45
> To: Xiaowei Bao <xiaowei.bao@nxp.com>; Jagdish Gediya
> <jagdish.gediya@nxp.com>; jagan@amarulasolutions.com;
> u-boot@lists.denx.de
> Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
> Subject: RE: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR for ESPI
> 
> 
> 
> >-----Original Message-----
> >From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Xiaowei Bao
> >Sent: Monday, October 21, 2019 2:32 PM
> >To: Jagdish Gediya <jagdish.gediya@nxp.com>;
> >jagan@amarulasolutions.com; u-boot@lists.denx.de
> >Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
> >Subject: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR for ESPI
> configs: spi:  -> spi: Kconfig
> 
> I understand you are adding config, because you have missed it earlier.
> But better would be something like Miss->Add

Thanks for your comments, this CONFIG option is missed by Jagan Teki, so I add it
in Kconfig file, otherwise, the ESPI will not work in some PPC board.

Thanks 
Xiaowei

> 
> ESPI -> FSL_ESPI
> >
> >Miss the SPI_FLASH_BAR for the ESPI controller of FSL.
> >
> >Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> >---
> > drivers/spi/Kconfig | 1 +
> > 1 file changed, 1 insertion(+)
> >
> >diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index
> >b8ca2bd..7003569
> >100644
> >--- a/drivers/spi/Kconfig
> >+++ b/drivers/spi/Kconfig
> >@@ -367,6 +367,7 @@ config CF_SPI
> >
> > config FSL_ESPI
> > 	bool "Freescale eSPI driver"
> >+	imply SPI_FLASH_BAR
> > 	help
> > 	  Enable the Freescale eSPI driver. This driver can be used to
> > 	  access the SPI interface and SPI NOR flash on platforms embedding
> >--
> 
> --priyankajain

On Tue, Oct 22, 2019 at 3:21 PM Xiaowei Bao <xiaowei.bao@nxp.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Priyanka Jain <priyanka.jain@nxp.com>
> > Sent: 2019年10月22日 17:45
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>; Jagdish Gediya
> > <jagdish.gediya@nxp.com>; jagan@amarulasolutions.com;
> > u-boot@lists.denx.de
> > Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Subject: RE: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR for ESPI
> >
> >
> >
> > >-----Original Message-----
> > >From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Xiaowei Bao
> > >Sent: Monday, October 21, 2019 2:32 PM
> > >To: Jagdish Gediya <jagdish.gediya@nxp.com>;
> > >jagan@amarulasolutions.com; u-boot@lists.denx.de
> > >Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
> > >Subject: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR for ESPI
> > configs: spi:  -> spi: Kconfig
> >
> > I understand you are adding config, because you have missed it earlier.
> > But better would be something like Miss->Add
>
> Thanks for your comments, this CONFIG option is missed by Jagan Teki, so I add it
> in Kconfig file, otherwise, the ESPI will not work in some PPC board.

Did I miss while moving around? please mark the commit where it missed
it would help to track where the issue comes from.

> -----Original Message-----
> From: Jagan Teki <jagan@amarulasolutions.com>
> Sent: 2019年10月24日 3:40
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: Priyanka Jain <priyanka.jain@nxp.com>; Jagdish Gediya
> <jagdish.gediya@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR for ESPI
> 
> On Tue, Oct 22, 2019 at 3:21 PM Xiaowei Bao <xiaowei.bao@nxp.com>
> wrote:
> >
> >
> >
> > > -----Original Message-----
> > > From: Priyanka Jain <priyanka.jain@nxp.com>
> > > Sent: 2019年10月22日 17:45
> > > To: Xiaowei Bao <xiaowei.bao@nxp.com>; Jagdish Gediya
> > > <jagdish.gediya@nxp.com>; jagan@amarulasolutions.com;
> > > u-boot@lists.denx.de
> > > Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > Subject: RE: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR
> > > for ESPI
> > >
> > >
> > >
> > > >-----Original Message-----
> > > >From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Xiaowei
> > > >Bao
> > > >Sent: Monday, October 21, 2019 2:32 PM
> > > >To: Jagdish Gediya <jagdish.gediya@nxp.com>;
> > > >jagan@amarulasolutions.com; u-boot@lists.denx.de
> > > >Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > >Subject: [U-Boot] [PATCH] configs: spi: Miss the SPI_FLASH_BAR for
> > > >ESPI
> > > configs: spi:  -> spi: Kconfig
> > >
> > > I understand you are adding config, because you have missed it earlier.
> > > But better would be something like Miss->Add
> >
> > Thanks for your comments, this CONFIG option is missed by Jagan Teki,
> > so I add it in Kconfig file, otherwise, the ESPI will not work in some PPC
> board.
> 
> Did I miss while moving around? please mark the commit where it missed it
> would help to track where the issue comes from.

Oh, sorry, it is missed by Vignesh R, the commit is 6d82517836418f984b7b4c05cf1427d7b49b1169

Thanks 
Xiaowei