diff mbox series

[OpenWrt-Devel,v2,3/3] kernel: rtl8367b: initial support for Realtek switch rtl8367s

Message ID 117be9a8-4641-0033-1900-95f53af653e8@yandex.ru
State Not Applicable, archived
Headers show
Series kernel: add support for realtek rtl8367s | expand

Commit Message

Serge Vailugin Aug. 27, 2019, 9:49 a.m. UTC 
From driver point of view no differance between rtl8367b and rtl8367s
if it connected through EXT2 (rgmii only).
So this trivial patch add some identification and initialization only.
SGMII/HSGMII mode for EXT1 is not implemented for the sake of patch 
clairity.
It may be simple but without test device...

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

  	/* TODO: disable RLTP */
@@ -983,6 +1004,17 @@ static int rtl8367b_setup(struct rtl8366
  			RTL8367B_PORT_MISC_CFG_EGRESS_MODE_ORIGINAL <<
  				RTL8367B_PORT_MISC_CFG_EGRESS_MODE_SHIFT);

+	/*
+	 * Enable for each phy port.
+	 */
+	for (i = 0; i < 5; i++) {
+		int data;
+		rtl8367b_read_phy_reg(smi, i, 0, &data);
+		data &= 0xF7FF;
+		data |= 0x200;
+		rtl8367b_write_phy_reg(smi, i, 0, data);
+	}
+
  	return 0;
  }

@@ -1501,19 +1533,26 @@ static int rtl8367b_detect(struct rtl836
  			"chip mode");
  		return ret;
  	}
-
-	switch (chip_ver) {
-	case 0x1000:
-		chip_name = "8367RB";
-		break;
-	case 0x1010:
-		chip_name = "8367R-VB";
-		break;
-	default:
-		dev_err(smi->parent,
-			"unknown chip num:%04x ver:%04x, mode:%04x\n",
-			chip_num, chip_ver, chip_mode);
-		return -ENODEV;
+	if (chip_num == 0x6367 || chip_num == 0x0597 || chip_num == 0x0276) {
+		chip_name = "8367C";
+	} else {
+		switch (chip_ver) {
+		case 0x1000:
+			chip_name = "8367RB";
+			break;
+		case 0x1010:
+			chip_name = "8367R-VB";
+			break;
+		case 0x0070: /* just hint - with wrong phy_id always read 0x0070 */
+			dev_err(smi->parent,
+				"wrong switch address %d (0 or 29)?\n", smi->phy_id);
+			/* fall through */
+		default:
+			dev_err(smi->parent,
+				"unknown chip num:%04x ver:%04x, mode:%04x\n",
+				chip_num, chip_ver, chip_mode);
+			return -ENODEV;
+		}
  	}

  	dev_info(smi->parent, "RTL%s chip found\n", chip_name);

---
serge
diff mbox series

Patch

--- a/target/linux/generic/files/drivers/net/phy/rtl8367b.c
+++ b/target/linux/generic/files/drivers/net/phy/rtl8367b.c
@@ -588,6 +588,20 @@  static const struct rtl8367b_initval rtl
  	{0x133E, 0x000E}, {0x133F, 0x0010},
  };

+static const struct rtl8367b_initval rtl8367c_initvals0[] = {
+	{0x13c2, 0x0000}, {0x0018, 0x0f00}, {0x0038, 0x0f00}, {0x0058, 0x0f00},
+	{0x0078, 0x0f00}, {0x0098, 0x0f00}, {0x1d15, 0x0a69}, {0x2000, 0x1340},
+	{0x2020, 0x1340}, {0x2040, 0x1340}, {0x2060, 0x1340}, {0x2080, 0x1340},
+	{0x13eb, 0x15bb}, {0x1303, 0x06d6}, {0x1304, 0x0700}, {0x13E2, 0x003F},
+	{0x13F9, 0x0090}, {0x121e, 0x03CA}, {0x1233, 0x0352}, {0x1237, 0x00a0},
+	{0x123a, 0x0030}, {0x1239, 0x0084}, {0x0301, 0x1000}, {0x1349, 0x001F},
+	{0x18e0, 0x4004}, {0x122b, 0x641c}, {0x1305, 0xc000}, {0x1200, 0x7fcb},
+	{0x0884, 0x0003}, {0x06eb, 0x0001}, {0x00cf, 0xffff}, {0x00d0, 0x0007},
+	{0x00ce, 0x48b0}, {0x00ce, 0x48b0}, {0x0398, 0xffff}, {0x0399, 0x0007},
+	{0x0300, 0x0001}, {0x03fa, 0x0007}, {0x08c8, 0x00c0}, {0x0a30, 0x020e},
+	{0x0800, 0x0000}, {0x0802, 0x0000}, {0x09da, 0x0017}, {0x1d32, 0x0002},
+};
+
  static int rtl8367b_write_initvals(struct rtl8366_smi *smi,
  				  const struct rtl8367b_initval *initvals,
  				  int count)
@@ -699,31 +713,38 @@  static int rtl8367b_write_phy_reg(struct
  static int rtl8367b_init_regs(struct rtl8366_smi *smi)
  {
  	const struct rtl8367b_initval *initvals;
+	u32 chip_num;
  	u32 chip_ver;
  	u32 rlvid;
  	int count;
  	int err;

  	REG_WR(smi, RTL8367B_RTL_MAGIC_ID_REG, RTL8367B_RTL_MAGIC_ID_VAL);
+	REG_RD(smi, RTL8367B_CHIP_NUMBER_REG, &chip_num);
  	REG_RD(smi, RTL8367B_CHIP_VER_REG, &chip_ver);
-
  	rlvid = (chip_ver >> RTL8367B_CHIP_VER_RLVID_SHIFT) &
  		RTL8367B_CHIP_VER_RLVID_MASK;

-	switch (rlvid) {
-	case 0:
-		initvals = rtl8367r_vb_initvals_0;
-		count = ARRAY_SIZE(rtl8367r_vb_initvals_0);
-		break;
+	if (chip_num == 0x6367 || chip_num == 0x0597 || chip_num == 0x0276) {
+		initvals = rtl8367c_initvals0;
+		count = ARRAY_SIZE(rtl8367c_initvals0);
+	} else {
+		dev_info(smi->parent, "checking chip_num=0x%x ver=0x%x...\n", 
chip_num, chip_ver);
+		switch (rlvid) {
+		case 0:
+			initvals = rtl8367r_vb_initvals_0;
+			count = ARRAY_SIZE(rtl8367r_vb_initvals_0);
+			break;

-	case 1:
-		initvals = rtl8367r_vb_initvals_1;
-		count = ARRAY_SIZE(rtl8367r_vb_initvals_1);
-		break;
+		case 1:
+			initvals = rtl8367r_vb_initvals_1;
+			count = ARRAY_SIZE(rtl8367r_vb_initvals_1);
+			break;

-	default:
-		dev_err(smi->parent, "unknow rlvid %u\n", rlvid);
-		return -ENODEV;
+		default:
+			dev_err(smi->parent, "unknow rlvid %u\n", rlvid);
+			return -ENODEV;
+		}
  	}