diff mbox series

[U-Boot,v3,5/5] armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller

Message ID 20190723104315.45829-5-chuanhua.han@nxp.com
State Accepted
Commit 96d3fb41469272ff6e36308986618bb1c5c1c667
Delegated to: Prabhakar Kushwaha
Headers show
Series [U-Boot,v3,1/5] armv8: ls1088a: The ls1088a platform supports the I2C driver model. | expand

Commit Message

Chuanhua Han July 23, 2019, 10:43 a.m. UTC
This patch adds some slave nodes to support the i2c dm on the device
side under the i2c0 controller.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
---
depends on: 
    - http://patchwork.ozlabs.org/project/uboot/list/?series=110856
    - http://patchwork.ozlabs.org/project/uboot/list/?series=109459

Change in v3:
	- No change.
Change in v2: 
    - Delete unnecessary i2c slave nodes.

 arch/arm/dts/fsl-ls1088a-rdb.dts |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts
index 765d1e3..0fe3519 100644
--- a/arch/arm/dts/fsl-ls1088a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1088a-rdb.dts
@@ -17,6 +17,29 @@ 
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
 &qspi {
 	bus-num = <0>;
 	status = "okay";