=================
* Added the logic to replay rules.
* Did not add any port_disable/enable() calls as this will be taken
care of by Vivien's patches.
drivers/net/dsa/mv88e6xxx/chip.c | 89 ++++++++++++++++++++++++++++++--
1 file changed, 86 insertions(+), 3 deletions(-)
@@ -547,15 +547,21 @@ static int mv88e6xxx_g1_irq_setup(struct mv88e6xxx_chip *chip)
return err;
}
+static void mv88e6xxx_do_irq_poll(struct mv88e6xxx_chip *chip)
+{
+ mv88e6xxx_g1_irq_thread_work(chip);
+
+ kthread_queue_delayed_work(chip->kworker, &chip->irq_poll_work,
+ msecs_to_jiffies(100));
+}
+
static void mv88e6xxx_irq_poll(struct kthread_work *work)
{
struct mv88e6xxx_chip *chip = container_of(work,
struct mv88e6xxx_chip,
irq_poll_work.work);
- mv88e6xxx_g1_irq_thread_work(chip);
- kthread_queue_delayed_work(chip->kworker, &chip->irq_poll_work,
- msecs_to_jiffies(100));
+ mv88e6xxx_do_irq_poll(chip);
}
static int mv88e6xxx_irq_poll_setup(struct mv88e6xxx_chip *chip)
@@ -4855,6 +4861,82 @@ static const void *pdata_device_get_match_data(struct device *dev)
return NULL;
}
+static int __maybe_unused mv88e6xxx_suspend(struct device *dev)
+{
+ struct dsa_switch *ds = dev_get_drvdata(dev);
+ struct mv88e6xxx_chip *chip = ds->priv;
+
+ kthread_cancel_delayed_work_sync(&chip->irq_poll_work);
+
+ return dsa_switch_suspend(ds);
+}
+
+static int __maybe_unused mv88e6xxx_resume(struct device *dev)
+{
+ struct dsa_switch *ds = dev_get_drvdata(dev);
+ struct mv88e6xxx_chip *chip = ds->priv;
+ struct mv88e6xxx_rule *rule;
+ int ret;
+
+ mv88e6xxx_phy_init(chip);
+
+ mutex_lock(&chip->reg_lock);
+ ret = mv88e6xxx_switch_reset(chip);
+ mutex_unlock(&chip->reg_lock);
+ if (ret) {
+ dev_err(dev, "Failed to reset the switch\n");
+ return ret;
+ }
+
+ ret = mv88e6xxx_setup(ds);
+ if (ret) {
+ dev_err(dev, "Failed to setup the switch\n");
+ return ret;
+ }
+
+ mv88e6xxx_do_irq_poll(chip);
+
+ list_for_each_entry(rule, &chip->rules, node) {
+ switch (rule->type) {
+ case FDB_RULE:
+ ret = _mv88e6xxx_port_fdb_add(chip, rule->port,
+ rule->params.db.addr,
+ rule->params.db.vid);
+ break;
+ case MDB_RULE:
+ ret = _mv88e6xxx_port_mdb_add(chip, rule->port,
+ rule->params.db.addr,
+ rule->params.db.vid);
+ break;
+ case VLAN_RULE:
+ ret = _mv88e6xxx_port_vlan_add(chip, rule->port,
+ &rule->params.vlan);
+ break;
+ case BRIDGE_RULE:
+ ret = _mv88e6xxx_port_bridge_join(chip, rule->port,
+ rule->params.br);
+ break;
+ case CC_BRIDGE_RULE:
+ ret = _mv88e6xxx_crosschip_bridge_join(chip,
+ rule->params.crosschip.dev,
+ rule->port,
+ rule->params.crosschip.br);
+ break;
+ default:
+ dev_warn(chip->dev, "Unknown rule type (%d)\n",
+ rule->type);
+ continue;
+ }
+
+ if (ret)
+ dev_warn(chip->dev, "Cannot re-apply rule\n");
+ }
+
+ return dsa_switch_resume(ds);
+}
+
+static SIMPLE_DEV_PM_OPS(mv88e6xxx_pm_ops, mv88e6xxx_suspend, mv88e6xxx_resume);
+
static int mv88e6xxx_probe(struct mdio_device *mdiodev)
{
struct dsa_mv88e6xxx_pdata *pdata = mdiodev->dev.platform_data;
@@ -5041,6 +5123,7 @@ static struct mdio_driver mv88e6xxx_driver = {
.mdiodrv.driver = {
.name = "mv88e6085",
.of_match_table = mv88e6xxx_of_match,
+ .pm = &mv88e6xxx_pm_ops,
},
};
Bring S2RAM support to the mv88e6xxx DSA driver. The content of the *_irq_poll() helper is moved in *_do_irq_poll() so that that the function can be called from the ->resume() callback without using the *work pointer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Changes since v1: