diff mbox

pata_hpt366: fix timing register documentation

Message ID 200911242317.31495.sshtylyov@ru.mvista.com
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Sergei Shtylyov Nov. 24, 2009, 8:17 p.m. UTC 
The comment in the driver actually describes HPT37x's timing register layout,
which is different from HPT36x.  Fix it and reformat the comment, while at it.

Bump the driver version, accounting for several patches that forgot to do it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
The patch is against the recent Linus' tree.

 drivers/ata/pata_hpt366.c |   30 ++++++++++++++----------------
 1 files changed, 14 insertions(+), 16 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jeff Garzik Dec. 3, 2009, 7:36 a.m. UTC | #1 
On 11/24/2009 03:17 PM, Sergei Shtylyov wrote:
> The comment in the driver actually describes HPT37x's timing register layout,
> which is different from HPT36x.  Fix it and reformat the comment, while at it.
>
> Bump the driver version, accounting for several patches that forgot to do it.
>
> Signed-off-by: Sergei Shtylyov<sshtylyov@ru.mvista.com>
>
> ---
> The patch is against the recent Linus' tree.
>
>   drivers/ata/pata_hpt366.c |   30 ++++++++++++++----------------
>   1 files changed, 14 insertions(+), 16 deletions(-)

applied


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

Index: linux-2.6/drivers/ata/pata_hpt366.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_hpt366.c
+++ linux-2.6/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@ 
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.6.2"
+#define DRV_VERSION	"0.6.7"
 
 struct hpt_clock {
 	u8	xfer_mode;
@@ -36,24 +36,22 @@  struct hpt_clock {
 
 /* key for bus clock timings
  * bit
- * 0:3    data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
- *        DMA. cycles = value + 1
- * 4:8    data_low_time. active time of DIOW_/DIOR_ for PIO and MW
- *        DMA. cycles = value + 1
- * 9:12   cmd_high_time. inactive time of DIOW_/DIOR_ during task file
+ * 0:3    data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ *        cycles = value + 1
+ * 4:7    data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ *        cycles = value + 1
+ * 8:11   cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
  *        register access.
- * 13:17  cmd_low_time. active time of DIOW_/DIOR_ during task file
+ * 12:15  cmd_low_time. Active time of DIOW_/DIOR_ during task file
  *        register access.
- * 18:21  udma_cycle_time. clock freq and clock cycles for UDMA xfer.
- *        during task file register access.
- * 22:24  pre_high_time. time to initialize 1st cycle for PIO and MW DMA
- *        xfer.
- * 25:27  cmd_pre_high_time. time to initialize 1st PIO cycle for task
+ * 16:18  udma_cycle_time. Clock cycles for UDMA xfer?
+ * 19:21  pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer.
+ * 22:24  cmd_pre_high_time. Time to initialize 1st PIO cycle for task file
  *        register access.
- * 28     UDMA enable
- * 29     DMA enable
- * 30     PIO_MST enable. if set, the chip is in bus master mode during
- *        PIO.
+ * 28     UDMA enable.
+ * 29     DMA  enable.
+ * 30     PIO_MST enable. If set, the chip is in bus master mode during
+ *        PIO xfer.
  * 31     FIFO enable.
  */