[v2,3/4] PCI: imx6: Add power-supply support

Some PCIe ports gate power to the slot.  In order to prevent system lockup,
these boards must enable power to the slot before attempting communication
over the PCI bus.

Signed-off-by: Sean Cross <xobs@kosagi.com>
---
 .../devicetree/bindings/pci/fsl,imx6q-pcie.txt     |  3 +++
 drivers/pci/host/pci-imx6.c                        | 27 ++++++++++++++++++++++
 2 files changed, 30 insertions(+)

Am Montag, den 22.12.2014, 16:32 +0800 schrieb Sean Cross:
> Some PCIe ports gate power to the slot.  In order to prevent system lockup,
> these boards must enable power to the slot before attempting communication
> over the PCI bus.
> 
> Signed-off-by: Sean Cross <xobs@kosagi.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  .../devicetree/bindings/pci/fsl,imx6q-pcie.txt     |  3 +++
>  drivers/pci/host/pci-imx6.c                        | 27 ++++++++++++++++++++++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index 6fbba53..a806b68 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -13,6 +13,9 @@ Required properties:
>  - clock-names: Must include the following additional entries:
>  	- "pcie_phy"
>  
> +Optional properties:
> +- bus-supply: A regulator that controls power to the entire bus
> +
>  Example:
>  
>  	pcie@0x01000000 {
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index 69202d1..8e4f957 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -22,6 +22,7 @@
>  #include <linux/pci.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/resource.h>
>  #include <linux/signal.h>
>  #include <linux/types.h>
> @@ -39,6 +40,7 @@ struct imx6_pcie {
>  	struct pcie_port	pp;
>  	struct regmap		*iomuxc_gpr;
>  	void __iomem		*mem_base;
> +	struct regulator	*bus_supply;
>  };
>  
>  /* PCIe Root Complex registers (memory-mapped) */
> @@ -523,6 +525,7 @@ static struct pcie_host_ops imx6_pcie_host_ops = {
>  static int __init imx6_add_pcie_port(struct pcie_port *pp,
>  			struct platform_device *pdev)
>  {
> +	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
>  	int ret;
>  
>  	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> @@ -544,9 +547,22 @@ static int __init imx6_add_pcie_port(struct pcie_port *pp,
>  	pp->root_bus_nr = -1;
>  	pp->ops = &imx6_pcie_host_ops;
>  
> +	if (imx6_pcie->bus_supply) {
> +		ret = regulator_enable(imx6_pcie->bus_supply);
> +		if (ret) {
> +			dev_err(pp->dev,
> +				"unable to enable bus supply: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
>  	ret = dw_pcie_host_init(pp);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to initialize host\n");
> +
> +		if (imx6_pcie->bus_supply)
> +			regulator_disable(imx6_pcie->bus_supply);
> +
>  		return ret;
>  	}
>  
> @@ -588,6 +604,17 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	/* Fetch bus supply */
> +	imx6_pcie->bus_supply = devm_regulator_get_optional(&pdev->dev, "bus");
> +	if (IS_ERR(imx6_pcie->bus_supply)) {
> +		ret = PTR_ERR(imx6_pcie->bus_supply);
> +		if (ret == -EPROBE_DEFER)
> +			return ret;
> +
> +		dev_err(&pdev->dev, "unable to get bus-supply\n");
> +		return ret;
> +	}
> +
>  	/* Fetch clocks */
>  	imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
>  	if (IS_ERR(imx6_pcie->pcie_phy)) {

On Monday 22 December 2014 16:32:06 Sean Cross wrote:
> Some PCIe ports gate power to the slot.  In order to prevent system lockup,
> these boards must enable power to the slot before attempting communication
> over the PCI bus.
> 
> Signed-off-by: Sean Cross <xobs@kosagi.com>

Could this be moved to the common pcie-designware driver? It doesn't seem
to be imx6 specific and other drivers might need the same thing.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html