| Message ID | 1395699232-28727-1-git-send-email-yinghai@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
Just a note :-) > -v2: use second way that is suggested by Bjorn. > It also solve the problem on Rajat's sytem that have wrong inital CC Er, not wrong initial CC. Just a different (but not necessarily wrong) different CC bit behavior :-). In my systems, the CC bit gets set for every write to the slot control register (even if Button, LED, EMI, power controller are not implemented). > Tested-by: Rajat Jain <rajatxjain@gmail.com> Yes, I tested and it seems to work fine on such systems too. Best Regards, Rajat -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Mar 24, 2014 at 4:19 PM, Rajat Jain <rajatjain@juniper.net> wrote: > Just a note :-) > >> -v2: use second way that is suggested by Bjorn. >> It also solve the problem on Rajat's sytem that have wrong inital CC > > Er, not wrong initial CC. > > Just a different (but not necessarily wrong) different CC bit behavior :-). In my systems, the CC bit gets set for every write to the slot control register (even if Button, LED, EMI, power controller are not implemented). > >> Tested-by: Rajat Jain <rajatxjain@gmail.com> > > Yes, I tested and it seems to work fine on such systems too. Thanks for inputs for change log changes. Assume Bjorn will sort it out. Thanks Yinghai -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: linux-2.6/drivers/pci/hotplug/pciehp_hpc.c =================================================================== --- linux-2.6.orig/drivers/pci/hotplug/pciehp_hpc.c +++ linux-2.6/drivers/pci/hotplug/pciehp_hpc.c @@ -158,15 +158,8 @@ static void pcie_write_cmd(struct contro mutex_lock(&ctrl->ctrl_lock); pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); - if (slot_status & PCI_EXP_SLTSTA_CC) { - if (!ctrl->no_cmd_complete) { - /* - * After 1 sec and CMD_COMPLETED still not set, just - * proceed forward to issue the next command according - * to spec. Just print out the error message. - */ - ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n"); - } else if (!NO_CMD_CMPL(ctrl)) { + if (ctrl->no_cmd_complete && slot_status & PCI_EXP_SLTSTA_CC) { + if (!NO_CMD_CMPL(ctrl)) { /* * This controller seems to notify of command completed * event even though it supports none of power @@ -182,16 +175,11 @@ static void pcie_write_cmd(struct contro } pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); - slot_ctrl &= ~mask; - slot_ctrl |= (cmd & mask); - ctrl->cmd_busy = 1; - smp_mb(); - pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl); - /* * Wait for command completion. */ - if (!ctrl->no_cmd_complete) { + if (!ctrl->no_cmd_complete && (slot_status & PCI_EXP_SLTSTA_CC) && + ctrl->cmd_busy) { int poll = 0; /* * if hotplug interrupt is not enabled or command @@ -203,6 +191,12 @@ static void pcie_write_cmd(struct contro poll = 1; pcie_wait_cmd(ctrl, poll); } + + slot_ctrl &= ~mask; + slot_ctrl |= (cmd & mask); + ctrl->cmd_busy = 1; + smp_mb(); + pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl); mutex_unlock(&ctrl->ctrl_lock); }
On system with 16 PCI express hotplug slots, customer complain every slot will report "Command not completed in 1000 msec" during initialization. Intel says that we should only wait command complete only for Electromechanical Interlock Control Power Controller Control Power Indicator Control Attention Indicator Control System with AMD/Nvidia chipset have same problem. Two ways to address the problem: 1. change to only wait when (EIC, PCC, PIC, AIC) bits get changed. 2. or check CMD_COMPLETE and wait before write command. Only wait when CC is set and cmd_busy is true. For chipset from intel will only have CC set for real hotplug control, so we could skip the wait for others. This patch is using second way. With that we could save 16 seconds during booting, later with 32 sockets system with 64 pcie hotplug slots we could save 64 seconds. -v2: use second way that is suggested by Bjorn. It also solve the problem on Rajat's sytem that have wrong inital CC Signed-off-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Rajat Jain <rajatxjain@gmail.com> --- drivers/pci/hotplug/pciehp_hpc.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html