Message ID | 1392645606-26352-1-git-send-email-imammedo@redhat.com |
---|---|
State | New |
Headers | show |
On Mon, Feb 17, 2014 at 03:00:06PM +0100, Igor Mammedov wrote: > QEMU abort is caused by misplaced assertion, which should > be checked only when device is hotplugged. > > Refernce to regression report: > http://www.mail-archive.com/qemu-devel@nongnu.org/msg216226.html > > Reported-By: Nigel Kukard <nkukard+qemu@lbsd.net> > Signed-off-by: Igor Mammedov <imammedo@redhat.com> Applied, thanks! BTW we really should make hotplug return an error not assert. > --- > hw/pci/pcie.c | 16 ++++++++-------- > 1 files changed, 8 insertions(+), 8 deletions(-) > > diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c > index 8ecd11e..02cde6f 100644 > --- a/hw/pci/pcie.c > +++ b/hw/pci/pcie.c > @@ -221,29 +221,23 @@ static void pcie_cap_slot_hotplug_common(PCIDevice *hotplug_dev, > DeviceState *dev, > uint8_t **exp_cap, Error **errp) > { > - PCIDevice *pci_dev = PCI_DEVICE(dev); > *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap; > uint16_t sltsta = pci_get_word(*exp_cap + PCI_EXP_SLTSTA); > > - PCIE_DEV_PRINTF(pci_dev, "hotplug state: %d\n", state); > + PCIE_DEV_PRINTF(PCI_DEVICE(dev), "hotplug state: %d\n", state); > if (sltsta & PCI_EXP_SLTSTA_EIS) { > /* the slot is electromechanically locked. > * This error is propagated up to qdev and then to HMP/QMP. > */ > error_setg_errno(errp, -EBUSY, "slot is electromechanically locked"); > } > - > - /* TODO: multifunction hot-plug. > - * Right now, only a device of function = 0 is allowed to be > - * hot plugged/unplugged. > - */ > - assert(PCI_FUNC(pci_dev->devfn) == 0); > } > > void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, > Error **errp) > { > uint8_t *exp_cap; > + PCIDevice *pci_dev = PCI_DEVICE(dev); > > pcie_cap_slot_hotplug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp); > > @@ -256,6 +250,12 @@ void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, > return; > } > > + /* TODO: multifunction hot-plug. > + * Right now, only a device of function = 0 is allowed to be > + * hot plugged/unplugged. > + */ > + assert(PCI_FUNC(pci_dev->devfn) == 0); > + > pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, > PCI_EXP_SLTSTA_PDS); > pcie_cap_slot_event(PCI_DEVICE(hotplug_dev), PCI_EXP_HP_EV_PDC); > -- > 1.7.1
diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c index 8ecd11e..02cde6f 100644 --- a/hw/pci/pcie.c +++ b/hw/pci/pcie.c @@ -221,29 +221,23 @@ static void pcie_cap_slot_hotplug_common(PCIDevice *hotplug_dev, DeviceState *dev, uint8_t **exp_cap, Error **errp) { - PCIDevice *pci_dev = PCI_DEVICE(dev); *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap; uint16_t sltsta = pci_get_word(*exp_cap + PCI_EXP_SLTSTA); - PCIE_DEV_PRINTF(pci_dev, "hotplug state: %d\n", state); + PCIE_DEV_PRINTF(PCI_DEVICE(dev), "hotplug state: %d\n", state); if (sltsta & PCI_EXP_SLTSTA_EIS) { /* the slot is electromechanically locked. * This error is propagated up to qdev and then to HMP/QMP. */ error_setg_errno(errp, -EBUSY, "slot is electromechanically locked"); } - - /* TODO: multifunction hot-plug. - * Right now, only a device of function = 0 is allowed to be - * hot plugged/unplugged. - */ - assert(PCI_FUNC(pci_dev->devfn) == 0); } void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { uint8_t *exp_cap; + PCIDevice *pci_dev = PCI_DEVICE(dev); pcie_cap_slot_hotplug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp); @@ -256,6 +250,12 @@ void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, return; } + /* TODO: multifunction hot-plug. + * Right now, only a device of function = 0 is allowed to be + * hot plugged/unplugged. + */ + assert(PCI_FUNC(pci_dev->devfn) == 0); + pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_PDS); pcie_cap_slot_event(PCI_DEVICE(hotplug_dev), PCI_EXP_HP_EV_PDC);
QEMU abort is caused by misplaced assertion, which should be checked only when device is hotplugged. Refernce to regression report: http://www.mail-archive.com/qemu-devel@nongnu.org/msg216226.html Reported-By: Nigel Kukard <nkukard+qemu@lbsd.net> Signed-off-by: Igor Mammedov <imammedo@redhat.com> --- hw/pci/pcie.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-)