| Message ID | 1386683567-26259-1-git-send-email-colin.king@canonical.com |
|---|---|
| State | Accepted |
| Headers | show |
On Tue, Dec 10, 2013 at 9:52 PM, Colin King <colin.king@canonical.com> wrote: > From: Colin Ian King <colin.king@canonical.com> > > Fix up the klog test to keep in sync with fwts > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > klog-0001/klog-0001.log | 48 ++++++++++++++++++++++++------------------------ > klog-0001/klog-0002.log | 28 ++++++++++++++-------------- > 2 files changed, 38 insertions(+), 38 deletions(-) > > diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log > index 5cbcbca..ee0e14b 100644 > --- a/klog-0001/klog-0001.log > +++ b/klog-0001/klog-0001.log > @@ -9743,14 +9743,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH > klog Kernel message: [ 0.810687] ACPI Error (dswload-0659): > @@ -10453,14 +10453,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1, > klog HIGH Kernel message: [ 1.184923] ACPI Warning: For > @@ -10892,14 +10892,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1, > klog HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding > @@ -12338,14 +12338,14 @@ klog > klog ADVICE: The ACPI Method returned a table of the incorrect > klog length. This can lead to unexepected results. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel > klog message: [ 2.592359] ACPI Error: Method parse/execution > @@ -12650,14 +12650,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel > klog message: [ 3.208822] ACPI Error (psparse-0537): Method > @@ -12778,14 +12778,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel > klog message: [ 3.675814] ACPI Error: Evaluating _BCM failed > @@ -12830,14 +12830,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1, > klog MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect > @@ -13075,14 +13075,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1, > klog HIGH Kernel message: [ 5.150560] ACPI Warning for > @@ -13284,14 +13284,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH > klog Kernel message: [ 8.794633] ACPI Error: Method parse > @@ -13493,14 +13493,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > klog Kernel message: [ 10.120967] ACPI Error: Needed [Buffer > @@ -14383,14 +14383,14 @@ klog > klog ADVICE: Method _BQC (Brightness Query Current) returned an > klog invalid display brightness level. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel > klog message: [ 15.846531] ACPI Error (psparse-0537): Method > @@ -14914,14 +14914,14 @@ klog ADVICE: The ACPI driver encountered an error executing > klog some ACPI AML code which originated from a device timing > klog out. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > klog Kernel message: [ 25.859931] ACPI Error: Needed [Buffer > diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log > index b6cd3c7..fdccb8e 100644 > --- a/klog-0001/klog-0002.log > +++ b/klog-0001/klog-0002.log > @@ -30,7 +30,7 @@ summary klog: CRITICAL Kernel message: [ 1.336148] ACPI Error (psparse- > summary klog: CRITICAL Kernel message: [ 1.371180] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT > summary klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary > -summary High failures: 1234 > +summary High failures: 1222 > summary klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427) > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427) > @@ -749,7 +749,6 @@ summary klog: HIGH Kernel message: [ 0.782613] ACPI Error (psargs-0359) > summary klog: HIGH Kernel message: [ 0.790513] ACPI Error: Method parse/execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node ffff880079f39f78), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.790526] ACPI Error: Method parse/execution failed [_SB_.PCI0.LPC_.EC__.BAT0._BIF] (Node ffff880079f37118), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.794367] ACPI Warning for _PR_.P002._PSD: Return type mismatch - found Integer, expected Package (20090903/nspredef-1006) > -summary klog: HIGH Kernel message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 0.810687] ACPI Error (dswload-0659): [DD02] Namespace lookup failure, AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 0.810756] ACPI Error (dswload-0659): [EHC1] Namespace lookup failure, AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 0.820565] ACPI Error: [FZHD] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) > @@ -809,7 +808,6 @@ summary klog: HIGH Kernel message: [ 1.027653] ACPI Error (uteval-0250) > summary klog: HIGH Kernel message: [ 1.158298] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node f701b648), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 1.167050] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359) > summary klog: HIGH Kernel message: [ 1.167226] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node f4422648), AE_NOT_FOUND (20110316/psparse-536) > -summary klog: HIGH Kernel message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 1.184923] ACPI Warning: For _SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20110413/nspredef-456) > summary klog: HIGH Kernel message: [ 1.186079] ACPI Error: [BRTW] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) > summary klog: HIGH Kernel message: [ 1.186087] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f4c2a588), AE_NOT_FOUND (20110112/psparse-536) > @@ -854,7 +852,6 @@ summary klog: HIGH Kernel message: [ 1.381481] ACPI Error (dswload-0659 > summary klog: HIGH Kernel message: [ 1.384655] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801393f91f8 (20090903/exresop-590) > summary klog: HIGH Kernel message: [ 1.384672] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c020), AE_AML_OPERAND_TYPE > summary klog: HIGH Kernel message: [ 1.384743] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4d9c0), AE_AML_OPERAND_TYPE > -summary klog: HIGH Kernel message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding to intel_idleACPI Warning for _TZ_.TZ01._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059) > summary klog: HIGH Kernel message: [ 1.399160] ACPI Warning for _SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20090903/nspredef-433) > summary klog: HIGH Kernel message: [ 1.400736] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f7018e58), AE_NOT_FOUND > @@ -999,7 +996,6 @@ summary klog: HIGH Kernel message: [ 2.462687] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 2.462711] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880147646cf8), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.468708] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU1._PDC] (Node f700f180), AE_INVALID_TABLE_LENGTH > summary klog: HIGH Kernel message: [ 2.468963] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU2._PDC] (Node f700f240), AE_INVALID_TABLE_LENGTH > -summary klog: HIGH Kernel message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 2.592359] ACPI Error: Method parse/execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.592381] ACPI Error: Method parse/execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.593071] ACPI Error: Method parse/execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118), AE_NOT_FOUND (20110112/psparse-536) > @@ -1032,7 +1028,6 @@ summary klog: HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 3.112494] ACPI Error (psparse-0537): Method parse/execution failed [SMIE] (Node f7427a20), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112522] ACPI Error (psparse-0537): Method parse/execution failed [NEVT] (Node f74279d8), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112549] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node f7427690), AE_NOT_FOUND > -summary klog: HIGH Kernel message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 3.208822] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.C003.C098._DOD] (Node ffff88007cf30b60), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 3.223518] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff880236c469a0), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 3.420672] ACPI Warning for _TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059) > @@ -1042,13 +1037,11 @@ summary klog: HIGH Kernel message: [ 3.490832] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 3.490852] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PMI0._PMC] (Node ffff88013bc2bd40), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 3.502273] ACPI Error: Could not enable SleepButton event (20100428/evxfevnt-205) > summary klog: HIGH Kernel message: [ 3.601126] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f7420690), AE_AML_PACKAGE_LIMIT > -summary klog: HIGH Kernel message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 3.675814] ACPI Error: Evaluating _BCM failed (20100428/video-532) > summary klog: HIGH Kernel message: [ 3.868794] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831b58), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 3.868812] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831b70), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 3.983031] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff88021d459028), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 3.983040] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff88021d459618), AE_ALREADY_EXISTS (20110112/psparse-536) > -summary klog: HIGH Kernel message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 4.115197] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff88021d458eb0), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 4.115206] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff88021d4594b0), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 4.190434] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342f8), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > @@ -1070,7 +1063,6 @@ summary klog: HIGH Kernel message: [ 4.838984] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 4.839033] ACPI Error (psparse-0537): Method parse/execution failed [_TZ_.TZ2_._TMP] (Node f701b7c8), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 4.890970] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff880126e43f50), AE_ALREADY_EXISTS (20110413/psparse-536) > summary klog: HIGH Kernel message: [ 4.890980] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff880126e44550), AE_ALREADY_EXISTS (20110413/psparse-536) > -summary klog: HIGH Kernel message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 5.150560] ACPI Warning for _SB_.BAT0._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer (20090903/nspredef-1012) > summary klog: HIGH Kernel message: [ 5.332663] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f4425450), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 6.224974] ACPI Error: Method parse/execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node f3423438), AE_ALREADY_EXISTS (20110112/psparse-536) > @@ -1091,7 +1083,6 @@ summary klog: HIGH Kernel message: [ 8.137317] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 8.137344] ACPI Error (psparse-0537): Method parse/execution failed [EC0A] (Node f702ea08), AE_TIME > summary klog: HIGH Kernel message: [ 8.137370] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.AMW0._WED] (Node f7019ca8), AE_TIME > summary klog: HIGH Kernel message: [ 8.227953] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.C003.C098._DOD] (Node f7021588), AE_AML_PACKAGE_LIMIT > -summary klog: HIGH Kernel message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 8.794633] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f5824ab0), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 9.141980] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f702e690), AE_TIME > summary klog: HIGH Kernel message: [ 9.142017] ACPI Error (psparse-0537): Method parse/execution failed [ECRB] (Node f702e768), AE_TIME > @@ -1111,7 +1102,6 @@ summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff88007af33910), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff88007af32b68), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff88007af32cf8), AE_NOT_FOUND (20110112/psparse-536) > -summary klog: HIGH Kernel message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 10.120967] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88023bcba438 (20110112/exresop-590) > summary klog: HIGH Kernel message: [ 10.120977] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023f45edc0), AE_AML_OPERAND_TYPE (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 10.121007] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88023bcba1b0 (20110112/exresop-590) > @@ -1195,7 +1185,6 @@ summary klog: HIGH Kernel message: [ 15.027542] ACPI Error (psparse-053 > summary klog: HIGH Kernel message: [ 15.027579] ACPI Error (psparse-0537): Method parse/execution failed [NEVT] (Node ffff88007513b120), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 15.027616] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880075139cc0), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 15.287082] ACPI Warning: _BQC returned an invalid level (20100428/video-640) > -summary klog: HIGH Kernel message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 15.846531] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff8800b3840360), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 16.336080] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q33] (Node f70244b0), AE_TIME > summary klog: HIGH Kernel message: [ 16.592600] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node ffff880226c4a120), AE_AML_INFINITE_LOOP > @@ -1245,7 +1234,6 @@ summary klog: HIGH Kernel message: [ 22.154348] ACPI Error (psparse-053 > summary klog: HIGH Kernel message: [ 22.154443] ACPI Error (psparse-0537): Method parse/execution failed [ECRB] (Node f7427780), AE_TIME > summary klog: HIGH Kernel message: [ 22.154516] ACPI Error (psparse-0537): Method parse/execution failed [ECG5] (Node f7427828), AE_TIME > summary klog: HIGH Kernel message: [ 22.154587] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.AC__._PSR] (Node f7427c18), AE_TIME > -summary klog: HIGH Kernel message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 25.859931] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880139af5240 (20090903/exresop-590) > summary klog: HIGH Kernel message: [ 25.859949] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c0e0), AE_AML_OPERAND_TYPE > summary klog: HIGH Kernel message: [ 25.860025] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4da80), AE_AML_OPERAND_TYPE > @@ -1599,8 +1587,20 @@ summary klog: MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrec > summary klog: MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C (20110413/tbutils-314) > summary klog: MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 47 (20090903/tbutils-314) > summary > -summary Low failures: 1 > +summary Low failures: 13 > +summary klog: LOW Kernel message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS > summary klog: LOW Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. > +summary klog: LOW Kernel message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS > summary > summary Other failures: NONE > summary > -- > 1.8.5.1 > Acked-by: Keng-Yu Lin <kengyu@canonical.com>
On 12/10/2013 09:52 PM, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > Fix up the klog test to keep in sync with fwts > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > klog-0001/klog-0001.log | 48 ++++++++++++++++++++++++------------------------ > klog-0001/klog-0002.log | 28 ++++++++++++++-------------- > 2 files changed, 38 insertions(+), 38 deletions(-) > > diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log > index 5cbcbca..ee0e14b 100644 > --- a/klog-0001/klog-0001.log > +++ b/klog-0001/klog-0001.log > @@ -9743,14 +9743,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH > klog Kernel message: [ 0.810687] ACPI Error (dswload-0659): > @@ -10453,14 +10453,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1, > klog HIGH Kernel message: [ 1.184923] ACPI Warning: For > @@ -10892,14 +10892,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1, > klog HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding > @@ -12338,14 +12338,14 @@ klog > klog ADVICE: The ACPI Method returned a table of the incorrect > klog length. This can lead to unexepected results. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel > klog message: [ 2.592359] ACPI Error: Method parse/execution > @@ -12650,14 +12650,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel > klog message: [ 3.208822] ACPI Error (psparse-0537): Method > @@ -12778,14 +12778,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel > klog message: [ 3.675814] ACPI Error: Evaluating _BCM failed > @@ -12830,14 +12830,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1, > klog MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect > @@ -13075,14 +13075,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1, > klog HIGH Kernel message: [ 5.150560] ACPI Warning for > @@ -13284,14 +13284,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH > klog Kernel message: [ 8.794633] ACPI Error: Method parse > @@ -13493,14 +13493,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > klog Kernel message: [ 10.120967] ACPI Error: Needed [Buffer > @@ -14383,14 +14383,14 @@ klog > klog ADVICE: Method _BQC (Brightness Query Current) returned an > klog invalid display brightness level. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel > klog message: [ 15.846531] ACPI Error (psparse-0537): Method > @@ -14914,14 +14914,14 @@ klog ADVICE: The ACPI driver encountered an error executing > klog some ACPI AML code which originated from a device timing > klog out. > klog > -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel > +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel > klog message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines > klog _DOD but not _DOS > klog > klog ADVICE: ACPI Method _DOD (Enumerate all devices attached > klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > -klog been omitted. This can cause display switching issues. > +klog been omitted. > klog > klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > klog Kernel message: [ 25.859931] ACPI Error: Needed [Buffer > diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log > index b6cd3c7..fdccb8e 100644 > --- a/klog-0001/klog-0002.log > +++ b/klog-0001/klog-0002.log > @@ -30,7 +30,7 @@ summary klog: CRITICAL Kernel message: [ 1.336148] ACPI Error (psparse- > summary klog: CRITICAL Kernel message: [ 1.371180] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT > summary klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary > -summary High failures: 1234 > +summary High failures: 1222 > summary klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427) > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427) > @@ -749,7 +749,6 @@ summary klog: HIGH Kernel message: [ 0.782613] ACPI Error (psargs-0359) > summary klog: HIGH Kernel message: [ 0.790513] ACPI Error: Method parse/execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node ffff880079f39f78), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.790526] ACPI Error: Method parse/execution failed [_SB_.PCI0.LPC_.EC__.BAT0._BIF] (Node ffff880079f37118), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.794367] ACPI Warning for _PR_.P002._PSD: Return type mismatch - found Integer, expected Package (20090903/nspredef-1006) > -summary klog: HIGH Kernel message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 0.810687] ACPI Error (dswload-0659): [DD02] Namespace lookup failure, AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 0.810756] ACPI Error (dswload-0659): [EHC1] Namespace lookup failure, AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 0.820565] ACPI Error: [FZHD] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) > @@ -809,7 +808,6 @@ summary klog: HIGH Kernel message: [ 1.027653] ACPI Error (uteval-0250) > summary klog: HIGH Kernel message: [ 1.158298] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node f701b648), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 1.167050] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359) > summary klog: HIGH Kernel message: [ 1.167226] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node f4422648), AE_NOT_FOUND (20110316/psparse-536) > -summary klog: HIGH Kernel message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 1.184923] ACPI Warning: For _SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20110413/nspredef-456) > summary klog: HIGH Kernel message: [ 1.186079] ACPI Error: [BRTW] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) > summary klog: HIGH Kernel message: [ 1.186087] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f4c2a588), AE_NOT_FOUND (20110112/psparse-536) > @@ -854,7 +852,6 @@ summary klog: HIGH Kernel message: [ 1.381481] ACPI Error (dswload-0659 > summary klog: HIGH Kernel message: [ 1.384655] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801393f91f8 (20090903/exresop-590) > summary klog: HIGH Kernel message: [ 1.384672] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c020), AE_AML_OPERAND_TYPE > summary klog: HIGH Kernel message: [ 1.384743] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4d9c0), AE_AML_OPERAND_TYPE > -summary klog: HIGH Kernel message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding to intel_idleACPI Warning for _TZ_.TZ01._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059) > summary klog: HIGH Kernel message: [ 1.399160] ACPI Warning for _SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20090903/nspredef-433) > summary klog: HIGH Kernel message: [ 1.400736] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f7018e58), AE_NOT_FOUND > @@ -999,7 +996,6 @@ summary klog: HIGH Kernel message: [ 2.462687] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 2.462711] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880147646cf8), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.468708] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU1._PDC] (Node f700f180), AE_INVALID_TABLE_LENGTH > summary klog: HIGH Kernel message: [ 2.468963] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU2._PDC] (Node f700f240), AE_INVALID_TABLE_LENGTH > -summary klog: HIGH Kernel message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 2.592359] ACPI Error: Method parse/execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.592381] ACPI Error: Method parse/execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.593071] ACPI Error: Method parse/execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118), AE_NOT_FOUND (20110112/psparse-536) > @@ -1032,7 +1028,6 @@ summary klog: HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 3.112494] ACPI Error (psparse-0537): Method parse/execution failed [SMIE] (Node f7427a20), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112522] ACPI Error (psparse-0537): Method parse/execution failed [NEVT] (Node f74279d8), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112549] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node f7427690), AE_NOT_FOUND > -summary klog: HIGH Kernel message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 3.208822] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.C003.C098._DOD] (Node ffff88007cf30b60), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 3.223518] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff880236c469a0), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 3.420672] ACPI Warning for _TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059) > @@ -1042,13 +1037,11 @@ summary klog: HIGH Kernel message: [ 3.490832] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 3.490852] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PMI0._PMC] (Node ffff88013bc2bd40), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 3.502273] ACPI Error: Could not enable SleepButton event (20100428/evxfevnt-205) > summary klog: HIGH Kernel message: [ 3.601126] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f7420690), AE_AML_PACKAGE_LIMIT > -summary klog: HIGH Kernel message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 3.675814] ACPI Error: Evaluating _BCM failed (20100428/video-532) > summary klog: HIGH Kernel message: [ 3.868794] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831b58), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 3.868812] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831b70), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 3.983031] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff88021d459028), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 3.983040] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff88021d459618), AE_ALREADY_EXISTS (20110112/psparse-536) > -summary klog: HIGH Kernel message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 4.115197] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff88021d458eb0), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 4.115206] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff88021d4594b0), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 4.190434] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342f8), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > @@ -1070,7 +1063,6 @@ summary klog: HIGH Kernel message: [ 4.838984] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 4.839033] ACPI Error (psparse-0537): Method parse/execution failed [_TZ_.TZ2_._TMP] (Node f701b7c8), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 4.890970] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff880126e43f50), AE_ALREADY_EXISTS (20110413/psparse-536) > summary klog: HIGH Kernel message: [ 4.890980] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff880126e44550), AE_ALREADY_EXISTS (20110413/psparse-536) > -summary klog: HIGH Kernel message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 5.150560] ACPI Warning for _SB_.BAT0._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer (20090903/nspredef-1012) > summary klog: HIGH Kernel message: [ 5.332663] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f4425450), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 6.224974] ACPI Error: Method parse/execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node f3423438), AE_ALREADY_EXISTS (20110112/psparse-536) > @@ -1091,7 +1083,6 @@ summary klog: HIGH Kernel message: [ 8.137317] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 8.137344] ACPI Error (psparse-0537): Method parse/execution failed [EC0A] (Node f702ea08), AE_TIME > summary klog: HIGH Kernel message: [ 8.137370] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.AMW0._WED] (Node f7019ca8), AE_TIME > summary klog: HIGH Kernel message: [ 8.227953] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.C003.C098._DOD] (Node f7021588), AE_AML_PACKAGE_LIMIT > -summary klog: HIGH Kernel message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 8.794633] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f5824ab0), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 9.141980] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f702e690), AE_TIME > summary klog: HIGH Kernel message: [ 9.142017] ACPI Error (psparse-0537): Method parse/execution failed [ECRB] (Node f702e768), AE_TIME > @@ -1111,7 +1102,6 @@ summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff88007af33910), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff88007af32b68), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff88007af32cf8), AE_NOT_FOUND (20110112/psparse-536) > -summary klog: HIGH Kernel message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 10.120967] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88023bcba438 (20110112/exresop-590) > summary klog: HIGH Kernel message: [ 10.120977] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023f45edc0), AE_AML_OPERAND_TYPE (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 10.121007] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88023bcba1b0 (20110112/exresop-590) > @@ -1195,7 +1185,6 @@ summary klog: HIGH Kernel message: [ 15.027542] ACPI Error (psparse-053 > summary klog: HIGH Kernel message: [ 15.027579] ACPI Error (psparse-0537): Method parse/execution failed [NEVT] (Node ffff88007513b120), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 15.027616] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880075139cc0), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 15.287082] ACPI Warning: _BQC returned an invalid level (20100428/video-640) > -summary klog: HIGH Kernel message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 15.846531] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff8800b3840360), AE_AML_PACKAGE_LIMIT > summary klog: HIGH Kernel message: [ 16.336080] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q33] (Node f70244b0), AE_TIME > summary klog: HIGH Kernel message: [ 16.592600] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node ffff880226c4a120), AE_AML_INFINITE_LOOP > @@ -1245,7 +1234,6 @@ summary klog: HIGH Kernel message: [ 22.154348] ACPI Error (psparse-053 > summary klog: HIGH Kernel message: [ 22.154443] ACPI Error (psparse-0537): Method parse/execution failed [ECRB] (Node f7427780), AE_TIME > summary klog: HIGH Kernel message: [ 22.154516] ACPI Error (psparse-0537): Method parse/execution failed [ECG5] (Node f7427828), AE_TIME > summary klog: HIGH Kernel message: [ 22.154587] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.AC__._PSR] (Node f7427c18), AE_TIME > -summary klog: HIGH Kernel message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS > summary klog: HIGH Kernel message: [ 25.859931] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880139af5240 (20090903/exresop-590) > summary klog: HIGH Kernel message: [ 25.859949] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c0e0), AE_AML_OPERAND_TYPE > summary klog: HIGH Kernel message: [ 25.860025] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4da80), AE_AML_OPERAND_TYPE > @@ -1599,8 +1587,20 @@ summary klog: MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrec > summary klog: MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C (20110413/tbutils-314) > summary klog: MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 47 (20090903/tbutils-314) > summary > -summary Low failures: 1 > +summary Low failures: 13 > +summary klog: LOW Kernel message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS > +summary klog: LOW Kernel message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS > summary klog: LOW Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. > +summary klog: LOW Kernel message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS > summary > summary Other failures: NONE > summary > Acked-by: Alex Hung <alex.hung@canonical.com>
diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log index 5cbcbca..ee0e14b 100644 --- a/klog-0001/klog-0001.log +++ b/klog-0001/klog-0001.log @@ -9743,14 +9743,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH klog Kernel message: [ 0.810687] ACPI Error (dswload-0659): @@ -10453,14 +10453,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1, klog HIGH Kernel message: [ 1.184923] ACPI Warning: For @@ -10892,14 +10892,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1, klog HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding @@ -12338,14 +12338,14 @@ klog klog ADVICE: The ACPI Method returned a table of the incorrect klog length. This can lead to unexepected results. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel klog message: [ 2.592359] ACPI Error: Method parse/execution @@ -12650,14 +12650,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel klog message: [ 3.208822] ACPI Error (psparse-0537): Method @@ -12778,14 +12778,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel klog message: [ 3.675814] ACPI Error: Evaluating _BCM failed @@ -12830,14 +12830,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1, klog MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect @@ -13075,14 +13075,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1, klog HIGH Kernel message: [ 5.150560] ACPI Warning for @@ -13284,14 +13284,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH klog Kernel message: [ 8.794633] ACPI Error: Method parse @@ -13493,14 +13493,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH klog Kernel message: [ 10.120967] ACPI Error: Needed [Buffer @@ -14383,14 +14383,14 @@ klog klog ADVICE: Method _BQC (Brightness Query Current) returned an klog invalid display brightness level. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel klog message: [ 15.846531] ACPI Error (psparse-0537): Method @@ -14914,14 +14914,14 @@ klog ADVICE: The ACPI driver encountered an error executing klog some ACPI AML code which originated from a device timing klog out. klog -klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel +klog FAILED [LOW] KlogAcpiDodWithNoDos: Test 1, LOW Kernel klog message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines klog _DOD but not _DOS klog klog ADVICE: ACPI Method _DOD (Enumerate all devices attached klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's -klog been omitted. This can cause display switching issues. +klog been omitted. klog klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH klog Kernel message: [ 25.859931] ACPI Error: Needed [Buffer diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log index b6cd3c7..fdccb8e 100644 --- a/klog-0001/klog-0002.log +++ b/klog-0001/klog-0002.log @@ -30,7 +30,7 @@ summary klog: CRITICAL Kernel message: [ 1.336148] ACPI Error (psparse- summary klog: CRITICAL Kernel message: [ 1.371180] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT summary klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) summary -summary High failures: 1234 +summary High failures: 1222 summary klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427) summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427) @@ -749,7 +749,6 @@ summary klog: HIGH Kernel message: [ 0.782613] ACPI Error (psargs-0359) summary klog: HIGH Kernel message: [ 0.790513] ACPI Error: Method parse/execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node ffff880079f39f78), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.790526] ACPI Error: Method parse/execution failed [_SB_.PCI0.LPC_.EC__.BAT0._BIF] (Node ffff880079f37118), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.794367] ACPI Warning for _PR_.P002._PSD: Return type mismatch - found Integer, expected Package (20090903/nspredef-1006) -summary klog: HIGH Kernel message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 0.810687] ACPI Error (dswload-0659): [DD02] Namespace lookup failure, AE_NOT_FOUND summary klog: HIGH Kernel message: [ 0.810756] ACPI Error (dswload-0659): [EHC1] Namespace lookup failure, AE_NOT_FOUND summary klog: HIGH Kernel message: [ 0.820565] ACPI Error: [FZHD] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) @@ -809,7 +808,6 @@ summary klog: HIGH Kernel message: [ 1.027653] ACPI Error (uteval-0250) summary klog: HIGH Kernel message: [ 1.158298] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node f701b648), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 1.167050] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359) summary klog: HIGH Kernel message: [ 1.167226] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node f4422648), AE_NOT_FOUND (20110316/psparse-536) -summary klog: HIGH Kernel message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 1.184923] ACPI Warning: For _SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20110413/nspredef-456) summary klog: HIGH Kernel message: [ 1.186079] ACPI Error: [BRTW] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) summary klog: HIGH Kernel message: [ 1.186087] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f4c2a588), AE_NOT_FOUND (20110112/psparse-536) @@ -854,7 +852,6 @@ summary klog: HIGH Kernel message: [ 1.381481] ACPI Error (dswload-0659 summary klog: HIGH Kernel message: [ 1.384655] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801393f91f8 (20090903/exresop-590) summary klog: HIGH Kernel message: [ 1.384672] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c020), AE_AML_OPERAND_TYPE summary klog: HIGH Kernel message: [ 1.384743] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4d9c0), AE_AML_OPERAND_TYPE -summary klog: HIGH Kernel message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 1.398053] ACPI: acpi_idle yielding to intel_idleACPI Warning for _TZ_.TZ01._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059) summary klog: HIGH Kernel message: [ 1.399160] ACPI Warning for _SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20090903/nspredef-433) summary klog: HIGH Kernel message: [ 1.400736] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f7018e58), AE_NOT_FOUND @@ -999,7 +996,6 @@ summary klog: HIGH Kernel message: [ 2.462687] ACPI Error: Method parse summary klog: HIGH Kernel message: [ 2.462711] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880147646cf8), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 2.468708] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU1._PDC] (Node f700f180), AE_INVALID_TABLE_LENGTH summary klog: HIGH Kernel message: [ 2.468963] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU2._PDC] (Node f700f240), AE_INVALID_TABLE_LENGTH -summary klog: HIGH Kernel message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 2.592359] ACPI Error: Method parse/execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 2.592381] ACPI Error: Method parse/execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 2.593071] ACPI Error: Method parse/execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118), AE_NOT_FOUND (20110112/psparse-536) @@ -1032,7 +1028,6 @@ summary klog: HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537 summary klog: HIGH Kernel message: [ 3.112494] ACPI Error (psparse-0537): Method parse/execution failed [SMIE] (Node f7427a20), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 3.112522] ACPI Error (psparse-0537): Method parse/execution failed [NEVT] (Node f74279d8), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 3.112549] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node f7427690), AE_NOT_FOUND -summary klog: HIGH Kernel message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 3.208822] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.C003.C098._DOD] (Node ffff88007cf30b60), AE_AML_PACKAGE_LIMIT summary klog: HIGH Kernel message: [ 3.223518] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff880236c469a0), AE_AML_PACKAGE_LIMIT summary klog: HIGH Kernel message: [ 3.420672] ACPI Warning for _TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059) @@ -1042,13 +1037,11 @@ summary klog: HIGH Kernel message: [ 3.490832] ACPI Error (psparse-0537 summary klog: HIGH Kernel message: [ 3.490852] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PMI0._PMC] (Node ffff88013bc2bd40), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 3.502273] ACPI Error: Could not enable SleepButton event (20100428/evxfevnt-205) summary klog: HIGH Kernel message: [ 3.601126] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f7420690), AE_AML_PACKAGE_LIMIT -summary klog: HIGH Kernel message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 3.675814] ACPI Error: Evaluating _BCM failed (20100428/video-532) summary klog: HIGH Kernel message: [ 3.868794] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831b58), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 3.868812] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831b70), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 3.983031] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff88021d459028), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 3.983040] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff88021d459618), AE_ALREADY_EXISTS (20110112/psparse-536) -summary klog: HIGH Kernel message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 4.115197] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff88021d458eb0), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 4.115206] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff88021d4594b0), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 4.190434] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342f8), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) @@ -1070,7 +1063,6 @@ summary klog: HIGH Kernel message: [ 4.838984] ACPI Error (psparse-0537 summary klog: HIGH Kernel message: [ 4.839033] ACPI Error (psparse-0537): Method parse/execution failed [_TZ_.TZ2_._TMP] (Node f701b7c8), AE_AML_PACKAGE_LIMIT summary klog: HIGH Kernel message: [ 4.890970] ACPI Error: Method parse/execution failed [_SB_.EEAC] (Node ffff880126e43f50), AE_ALREADY_EXISTS (20110413/psparse-536) summary klog: HIGH Kernel message: [ 4.890980] ACPI Error: Method parse/execution failed [_SB_.BAT2._STA] (Node ffff880126e44550), AE_ALREADY_EXISTS (20110413/psparse-536) -summary klog: HIGH Kernel message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 5.150560] ACPI Warning for _SB_.BAT0._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer (20090903/nspredef-1012) summary klog: HIGH Kernel message: [ 5.332663] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f4425450), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) summary klog: HIGH Kernel message: [ 6.224974] ACPI Error: Method parse/execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node f3423438), AE_ALREADY_EXISTS (20110112/psparse-536) @@ -1091,7 +1083,6 @@ summary klog: HIGH Kernel message: [ 8.137317] ACPI Error (psparse-0537 summary klog: HIGH Kernel message: [ 8.137344] ACPI Error (psparse-0537): Method parse/execution failed [EC0A] (Node f702ea08), AE_TIME summary klog: HIGH Kernel message: [ 8.137370] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.AMW0._WED] (Node f7019ca8), AE_TIME summary klog: HIGH Kernel message: [ 8.227953] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.C003.C098._DOD] (Node f7021588), AE_AML_PACKAGE_LIMIT -summary klog: HIGH Kernel message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 8.794633] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f5824ab0), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 9.141980] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node f702e690), AE_TIME summary klog: HIGH Kernel message: [ 9.142017] ACPI Error (psparse-0537): Method parse/execution failed [ECRB] (Node f702e768), AE_TIME @@ -1111,7 +1102,6 @@ summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff88007af33910), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff88007af32b68), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 9.957372] ACPI Error: Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff88007af32cf8), AE_NOT_FOUND (20110112/psparse-536) -summary klog: HIGH Kernel message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 10.120967] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88023bcba438 (20110112/exresop-590) summary klog: HIGH Kernel message: [ 10.120977] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023f45edc0), AE_AML_OPERAND_TYPE (20110112/psparse-536) summary klog: HIGH Kernel message: [ 10.121007] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88023bcba1b0 (20110112/exresop-590) @@ -1195,7 +1185,6 @@ summary klog: HIGH Kernel message: [ 15.027542] ACPI Error (psparse-053 summary klog: HIGH Kernel message: [ 15.027579] ACPI Error (psparse-0537): Method parse/execution failed [NEVT] (Node ffff88007513b120), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 15.027616] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880075139cc0), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 15.287082] ACPI Warning: _BQC returned an invalid level (20100428/video-640) -summary klog: HIGH Kernel message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 15.846531] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff8800b3840360), AE_AML_PACKAGE_LIMIT summary klog: HIGH Kernel message: [ 16.336080] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q33] (Node f70244b0), AE_TIME summary klog: HIGH Kernel message: [ 16.592600] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node ffff880226c4a120), AE_AML_INFINITE_LOOP @@ -1245,7 +1234,6 @@ summary klog: HIGH Kernel message: [ 22.154348] ACPI Error (psparse-053 summary klog: HIGH Kernel message: [ 22.154443] ACPI Error (psparse-0537): Method parse/execution failed [ECRB] (Node f7427780), AE_TIME summary klog: HIGH Kernel message: [ 22.154516] ACPI Error (psparse-0537): Method parse/execution failed [ECG5] (Node f7427828), AE_TIME summary klog: HIGH Kernel message: [ 22.154587] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.AC__._PSR] (Node f7427c18), AE_TIME -summary klog: HIGH Kernel message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS summary klog: HIGH Kernel message: [ 25.859931] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880139af5240 (20090903/exresop-590) summary klog: HIGH Kernel message: [ 25.859949] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node ffff88013ba4c0e0), AE_AML_OPERAND_TYPE summary klog: HIGH Kernel message: [ 25.860025] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013ba4da80), AE_AML_OPERAND_TYPE @@ -1599,8 +1587,20 @@ summary klog: MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrec summary klog: MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C (20110413/tbutils-314) summary klog: MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 47 (20090903/tbutils-314) summary -summary Low failures: 1 +summary Low failures: 13 +summary klog: LOW Kernel message: [ 0.810246] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 1.183989] [Firmware Bug]: ACPI(PEGD) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 3.663829] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS +summary klog: LOW Kernel message: [ 15.395484] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS summary klog: LOW Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. +summary klog: LOW Kernel message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS summary summary Other failures: NONE summary