diff mbox

[v2,1/3] mtd: gpmi: remove the unnecessary pr_err()

Message ID 1384829872-8714-2-git-send-email-b32955@freescale.com
State Accepted
Commit 43a34b8b730b6e12a8824c5bf2145022ed01f74f
Headers show

Commit Message

Huang Shijie Nov. 19, 2013, 2:57 a.m. UTC 
The error messages for the failure of dmaengine_prep_slave_sg are
not necessary, this patch removes all these pr_err, and returns with
the proper error code -EINVAL, not -1.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c |   63 +++++++++++---------------------
 1 files changed, 22 insertions(+), 41 deletions(-)

Comments

Brian Norris Nov. 20, 2013, 2:11 a.m. UTC | #1 
On Tue, Nov 19, 2013 at 10:57:50AM +0800, Huang Shijie wrote:
> The error messages for the failure of dmaengine_prep_slave_sg are
> not necessary, this patch removes all these pr_err, and returns with
> the proper error code -EINVAL, not -1.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>

Pushed patch 1 to l2-mtd.git/next. I'll wait for a new version of 2 and
3.

Brian
diff mbox

Patch

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 10a6f07..45b9a3d 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -1128,10 +1128,8 @@  int gpmi_send_command(struct gpmi_nand_data *this)
 	desc = dmaengine_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
-	if (!desc) {
-		pr_err("step 1 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [2] send out the COMMAND + ADDRESS string stored in @buffer */
 	sgl = &this->cmd_sgl;
@@ -1141,11 +1139,8 @@  int gpmi_send_command(struct gpmi_nand_data *this)
 	desc = dmaengine_prep_slave_sg(channel,
 				sgl, 1, DMA_MEM_TO_DEV,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-
-	if (!desc) {
-		pr_err("step 2 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [3] submit the DMA */
 	set_dma_type(this, DMA_FOR_COMMAND);
@@ -1174,20 +1169,17 @@  int gpmi_send_data(struct gpmi_nand_data *this)
 	pio[1] = 0;
 	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
-	if (!desc) {
-		pr_err("step 1 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [2] send DMA request */
 	prepare_data_dma(this, DMA_TO_DEVICE);
 	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
 					1, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc) {
-		pr_err("step 2 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
+
 	/* [3] submit the DMA */
 	set_dma_type(this, DMA_FOR_WRITE_DATA);
 	return start_dma_without_bch_irq(this, desc);
@@ -1211,20 +1203,16 @@  int gpmi_read_data(struct gpmi_nand_data *this)
 	desc = dmaengine_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
-	if (!desc) {
-		pr_err("step 1 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [2] : send DMA request */
 	prepare_data_dma(this, DMA_FROM_DEVICE);
 	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
 					1, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc) {
-		pr_err("step 2 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [3] : submit the DMA */
 	set_dma_type(this, DMA_FOR_READ_DATA);
@@ -1269,10 +1257,9 @@  int gpmi_send_page(struct gpmi_nand_data *this,
 					(struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE,
 					DMA_CTRL_ACK);
-	if (!desc) {
-		pr_err("step 2 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
+
 	set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
 	return start_dma_with_bch_irq(this, desc);
 }
@@ -1304,10 +1291,8 @@  int gpmi_read_page(struct gpmi_nand_data *this,
 	desc = dmaengine_prep_slave_sg(channel,
 				(struct scatterlist *)pio, 2,
 				DMA_TRANS_NONE, 0);
-	if (!desc) {
-		pr_err("step 1 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [2] Enable the BCH block and read. */
 	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
@@ -1334,10 +1319,8 @@  int gpmi_read_page(struct gpmi_nand_data *this,
 					(struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc) {
-		pr_err("step 2 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [3] Disable the BCH block */
 	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
@@ -1355,10 +1338,8 @@  int gpmi_read_page(struct gpmi_nand_data *this,
 				(struct scatterlist *)pio, 3,
 				DMA_TRANS_NONE,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc) {
-		pr_err("step 3 error\n");
-		return -1;
-	}
+	if (!desc)
+		return -EINVAL;
 
 	/* [4] submit the DMA */
 	set_dma_type(this, DMA_FOR_READ_ECC_PAGE);