| Message ID | 1379595943-14622-10-git-send-email-rogerq@ti.com |
|---|---|
| State | Not Applicable |
| Delegated to: | David Miller |
| Headers | show |
Hi, On Thursday, September 19, 2013 04:05:37 PM Roger Quadros wrote: > Texas Instruments SoCs like OMAP5 and DRA7 contain a SATA wrapper > around the AHCI SATA core. This driver will manage that. > > CC: Tejun Heo <tj@kernel.org> > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > Documentation/devicetree/bindings/ata/ti-sata.txt | 31 ++++ > drivers/ata/Kconfig | 7 + > drivers/ata/Makefile | 1 + > drivers/ata/sata_ti.c | 160 +++++++++++++++++++++ > 4 files changed, 199 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/ata/ti-sata.txt > create mode 100644 drivers/ata/sata_ti.c > > diff --git a/Documentation/devicetree/bindings/ata/ti-sata.txt b/Documentation/devicetree/bindings/ata/ti-sata.txt > new file mode 100644 > index 0000000..bf0ea3b > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/ti-sata.txt > @@ -0,0 +1,31 @@ > +* Texas Instruments SATA Controller Wrapper > + > +Required properties: > +- compatible : "ti,sata" > +- ti,hwmods : "sata" > +- reg : Register mapping > +- #address-cells: <1> > +- #size-cells : <1> > +- ranges : allows valid translation between child's address space and parent's > + address space. > +- Must contain at least one child node for the SATA controller core > + > +Example: > + > + sata: sata@4a141100 { > + compatible = "ti,sata"; > + ti,hwmods = "sata"; > + reg = <0x4a141100 0x7>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + dwc-ahci@4a140000 { > + compatible = "snps,dwc-ahci"; > + reg = <0x4a140000 0x1100>; > + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&sata_phy>; > + phy-names = "sata-phy"; > + clocks = <&sata_ref_clk>; > + clock-names = "optclk"; > + }; > + }; > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index a53ef27..a3de4d2 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -138,6 +138,13 @@ config SATA_SIL24 > > If unsure, say N. > > +config SATA_TI > + tristate "Texas Instruments SATA Wrapper driver" > + depends on ARCH_OMAP > + help > + This options enables SATA Wrapper driver for Texas Instruments SoCs. > + It is found on OMAP5 and DRA7. > + > config ATA_SFF > bool "ATA SFF support (for legacy IDE and PATA)" > default y > diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile > index 46518c6..673ba5e 100644 > --- a/drivers/ata/Makefile > +++ b/drivers/ata/Makefile > @@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o > obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o > obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o > obj-$(CONFIG_AHCI_IMX) += ahci_imx.o > +obj-$(CONFIG_SATA_TI) += sata_ti.o > > # SFF w/ custom DMA > obj-$(CONFIG_PDC_ADMA) += pdc_adma.o > diff --git a/drivers/ata/sata_ti.c b/drivers/ata/sata_ti.c > new file mode 100644 > index 0000000..0b9093d > --- /dev/null > +++ b/drivers/ata/sata_ti.c > @@ -0,0 +1,160 @@ > +/** > + * sata-ti.c - Texas Instruments Specific SATA Glue layer s/sata-ti/sata_ti/ > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com > + * > + * Authors: Roger Quadros <rogerq@ti.com> > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 of > + * the License as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/slab.h> > +#include <linux/platform_device.h> > +#include <linux/ioport.h> > +#include <linux/io.h> > +#include <linux/pm_runtime.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > + > +/* > + * All these registers belong to OMAP's Wrapper around the > + * DesignWare SATA Core. > + */ > + > +#define SATA_SYSCONFIG 0x0000 > +#define SATA_CDRLOCK 0x0004 These defines are not used anywhere. > +struct ti_sata { > + struct device *dev; > + void __iomem *base; > +}; > + > +static int ti_sata_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct device *dev = &pdev->dev; > + struct ti_sata *sata; > + struct resource *res; > + void __iomem *base; > + int ret; > + > + if (!np) { > + dev_err(dev, "device node not found\n"); > + return -EINVAL; > + } > + > + sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL); > + if (!sata) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, sata); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(dev, "missing memory base resource\n"); > + return -EINVAL; > + } > + > + base = devm_ioremap_resource(dev, res); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + sata->dev = dev; > + sata->base = base; sata structure is just setup and it is not used later anywhere. > + pm_runtime_enable(dev); > + ret = pm_runtime_get_sync(dev); > + if (ret < 0) { > + dev_err(dev, "pm_runtime_get_sync failed with err %d\n", > + ret); > + goto runtime_disable; > + } > + > + ret = of_platform_populate(np, NULL, NULL, dev); Shouldn't this driver depend on CONFIG_OF? > + if (ret) { > + dev_err(&pdev->dev, "failed to create TI SATA children\n"); > + goto runtime_put; > + } > + > + return 0; > + > +runtime_put: > + pm_runtime_put_sync(dev); > + > +runtime_disable: > + pm_runtime_disable(dev); > + > + return ret; > +} > + > +static int ti_sata_remove_child(struct device *dev, void *c) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + > + platform_device_unregister(pdev); > + > + return 0; > +} > + > +static int ti_sata_remove(struct platform_device *pdev) > +{ > + pm_runtime_put_sync(&pdev->dev); > + pm_runtime_disable(&pdev->dev); > + device_for_each_child(&pdev->dev, NULL, ti_sata_remove_child); > + > + return 0; > +} > + > +static const struct of_device_id of_ti_sata_match[] = { > + { > + .compatible = "ti,sata" > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, of_ti_sata_match); > + > +#ifdef CONFIG_PM > + > +static int ti_sata_resume(struct device *dev) > +{ > + pm_runtime_disable(dev); > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); This doesn't look like a correct ->resume method: * it shouldn't touch runtime PM at all * for each ->resume method there should be a corresponding ->suspend method Moreover this whole wrapper driver seems strange, why not just add a proper runtime PM support to ahci_platform driver instead? > + > + return 0; > +} > + > +static const struct dev_pm_ops ti_sata_dev_pm_ops = { > + .resume = ti_sata_resume, > +}; > + > +#define DEV_PM_OPS (&ti_sata_dev_pm_ops) > +#else > +#define DEV_PM_OPS NULL > +#endif /* CONFIG_PM */ > + > +static struct platform_driver ti_sata_driver = { > + .probe = ti_sata_probe, > + .remove = ti_sata_remove, > + .driver = { > + .name = "ti-sata", > + .of_match_table = of_ti_sata_match, > + .pm = DEV_PM_OPS, > + }, > +}; > + > +module_platform_driver(ti_sata_driver); > + > +MODULE_ALIAS("platform:ti-sata"); > +MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("TI SATA Glue Layer"); Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday, September 25, 2013 02:37:19 PM Bartlomiej Zolnierkiewicz wrote: [...] > > +#ifdef CONFIG_PM > > + > > +static int ti_sata_resume(struct device *dev) > > +{ > > + pm_runtime_disable(dev); > > + pm_runtime_set_active(dev); > > + pm_runtime_enable(dev); > > This doesn't look like a correct ->resume method: > * it shouldn't touch runtime PM at all > * for each ->resume method there should be a corresponding ->suspend method > > Moreover this whole wrapper driver seems strange, why not just add a proper > runtime PM support to ahci_platform driver instead? Hmm, even this shouldn't be needed as this wrapper driver doesn't have ->runtime_suspend and ->runtime resume methods. What exactly is the purpose of the existence of this wrapper driver? Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 09/25/2013 03:49 PM, Bartlomiej Zolnierkiewicz wrote: > On Wednesday, September 25, 2013 02:37:19 PM Bartlomiej Zolnierkiewicz wrote: > > [...] > >>> +#ifdef CONFIG_PM >>> + >>> +static int ti_sata_resume(struct device *dev) >>> +{ >>> + pm_runtime_disable(dev); >>> + pm_runtime_set_active(dev); >>> + pm_runtime_enable(dev); >> >> This doesn't look like a correct ->resume method: >> * it shouldn't touch runtime PM at all >> * for each ->resume method there should be a corresponding ->suspend method >> >> Moreover this whole wrapper driver seems strange, why not just add a proper >> runtime PM support to ahci_platform driver instead? > > Hmm, even this shouldn't be needed as this wrapper driver doesn't have > ->runtime_suspend and ->runtime resume methods. > > What exactly is the purpose of the existence of this wrapper driver? This is the weirdness of OMAP hwmod framework :). The OMAP hwmod framework tries to manage the module clocks by itself and needs a runtime_resume to enable the relevant clocks. hwmod framework will be deprecated in the near future and this is the place where we need to handle the resources. But since we are not yet there, I can get rid of this wrapper driver for now and add the necessary pm_runtime calls in the ahci_platform driver. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/ata/ti-sata.txt b/Documentation/devicetree/bindings/ata/ti-sata.txt new file mode 100644 index 0000000..bf0ea3b --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ti-sata.txt @@ -0,0 +1,31 @@ +* Texas Instruments SATA Controller Wrapper + +Required properties: +- compatible : "ti,sata" +- ti,hwmods : "sata" +- reg : Register mapping +- #address-cells: <1> +- #size-cells : <1> +- ranges : allows valid translation between child's address space and parent's + address space. +- Must contain at least one child node for the SATA controller core + +Example: + + sata: sata@4a141100 { + compatible = "ti,sata"; + ti,hwmods = "sata"; + reg = <0x4a141100 0x7>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dwc-ahci@4a140000 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + clock-names = "optclk"; + }; + }; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index a53ef27..a3de4d2 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -138,6 +138,13 @@ config SATA_SIL24 If unsure, say N. +config SATA_TI + tristate "Texas Instruments SATA Wrapper driver" + depends on ARCH_OMAP + help + This options enables SATA Wrapper driver for Texas Instruments SoCs. + It is found on OMAP5 and DRA7. + config ATA_SFF bool "ATA SFF support (for legacy IDE and PATA)" default y diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 46518c6..673ba5e 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o +obj-$(CONFIG_SATA_TI) += sata_ti.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/drivers/ata/sata_ti.c b/drivers/ata/sata_ti.c new file mode 100644 index 0000000..0b9093d --- /dev/null +++ b/drivers/ata/sata_ti.c @@ -0,0 +1,160 @@ +/** + * sata-ti.c - Texas Instruments Specific SATA Glue layer + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Roger Quadros <rogerq@ti.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/of_platform.h> + +/* + * All these registers belong to OMAP's Wrapper around the + * DesignWare SATA Core. + */ + +#define SATA_SYSCONFIG 0x0000 +#define SATA_CDRLOCK 0x0004 + +struct ti_sata { + struct device *dev; + void __iomem *base; +}; + +static int ti_sata_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct ti_sata *sata; + struct resource *res; + void __iomem *base; + int ret; + + if (!np) { + dev_err(dev, "device node not found\n"); + return -EINVAL; + } + + sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL); + if (!sata) + return -ENOMEM; + + platform_set_drvdata(pdev, sata); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing memory base resource\n"); + return -EINVAL; + } + + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + sata->dev = dev; + sata->base = base; + + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "pm_runtime_get_sync failed with err %d\n", + ret); + goto runtime_disable; + } + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(&pdev->dev, "failed to create TI SATA children\n"); + goto runtime_put; + } + + return 0; + +runtime_put: + pm_runtime_put_sync(dev); + +runtime_disable: + pm_runtime_disable(dev); + + return ret; +} + +static int ti_sata_remove_child(struct device *dev, void *c) +{ + struct platform_device *pdev = to_platform_device(dev); + + platform_device_unregister(pdev); + + return 0; +} + +static int ti_sata_remove(struct platform_device *pdev) +{ + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + device_for_each_child(&pdev->dev, NULL, ti_sata_remove_child); + + return 0; +} + +static const struct of_device_id of_ti_sata_match[] = { + { + .compatible = "ti,sata" + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_ti_sata_match); + +#ifdef CONFIG_PM + +static int ti_sata_resume(struct device *dev) +{ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} + +static const struct dev_pm_ops ti_sata_dev_pm_ops = { + .resume = ti_sata_resume, +}; + +#define DEV_PM_OPS (&ti_sata_dev_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +static struct platform_driver ti_sata_driver = { + .probe = ti_sata_probe, + .remove = ti_sata_remove, + .driver = { + .name = "ti-sata", + .of_match_table = of_ti_sata_match, + .pm = DEV_PM_OPS, + }, +}; + +module_platform_driver(ti_sata_driver); + +MODULE_ALIAS("platform:ti-sata"); +MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI SATA Glue Layer");
Texas Instruments SoCs like OMAP5 and DRA7 contain a SATA wrapper around the AHCI SATA core. This driver will manage that. CC: Tejun Heo <tj@kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> --- Documentation/devicetree/bindings/ata/ti-sata.txt | 31 ++++ drivers/ata/Kconfig | 7 + drivers/ata/Makefile | 1 + drivers/ata/sata_ti.c | 160 +++++++++++++++++++++ 4 files changed, 199 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/ti-sata.txt create mode 100644 drivers/ata/sata_ti.c