| Message ID | 1363605534-24776-5-git-send-email-b32955@freescale.com |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Mar 18, 2013 at 4:18 AM, Huang Shijie <b32955@freescale.com> wrote: > Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page > to store the ECC info. > > The onfi spec tells us that if the nand chip's recommended ECC codeword > size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then > read the Extended ECC information that is part of the extended parameter > page to retrieve the ECC requirements for this device. > > This patch adds > [1] the neccessary fields for nand_onfi_params{}, > [2] and adds the ext_ecc_info{} for Extended ECC information, > [3] adds ext_section{} for extended sections, > [4] and adds ext_param_page{} for the Extended Parameter Page. > > Signed-off-by: Huang Shijie <b32955@freescale.com> > --- > include/linux/mtd/nand.h | 39 ++++++++++++++++++++++++++++++++++++++- > 1 files changed, 38 insertions(+), 1 deletions(-) > > diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h > index 9779e3e..94ae957 100644 > --- a/include/linux/mtd/nand.h > +++ b/include/linux/mtd/nand.h > @@ -217,7 +217,10 @@ struct nand_onfi_params { > __le16 revision; > __le16 features; > __le16 opt_cmd; > - u8 reserved[22]; > + u8 reserved0[2]; > + __le16 ext_param_page_length; /* since onfi 2.1 */ > + u8 num_of_param_pages; /* since onfi 2.1 */ > + u8 reserved1[17]; > > /* manufacturer information block */ > char manufacturer[12]; > @@ -274,6 +277,40 @@ struct nand_onfi_params { > > #define ONFI_CRC_BASE 0x4F4E > > +/* Extended ECC information Block Definition (since onfi 2.1) */ > +struct ext_ecc_info { Should include NAND and/or ONFI in the name (e.g., onfi_ext_ecc_info) > + u8 ecc_bits; > + u8 codeword_size; > + __le16 bb_per_lun; > + __le16 block_endurance; > + u8 reserved[2]; > +} __attribute__((packed)); > + > +#define SECTION_TYPE_0 0 /* Unused section. */ > +#define SECTION_TYPE_1 1 /* for additional sections. */ > +#define SECTION_TYPE_2 2 /* for ECC information. */ Should prefix these with ONFI_ > +struct ext_section { Also needs an ONFI prefix, e.g., onfi_ext_section > + u8 type; > + u8 length; > +} __attribute__((packed)); > + > +#define EXT_SECTION_MAX 8 Also should be prefixed ONFI_ > + > +/* Extended Parameter Page Definition (since onfi 2.1) */ > +struct ext_param_page { onfi_ext_param_page > + __le16 crc; > + u8 sig[4]; /* 'E' 'P' 'P' 'S' */ > + u8 reserved0[10]; > + struct ext_section sections[EXT_SECTION_MAX]; > + > + /* > + * The actual size of the Extended Parameter Page is in > + * @ext_param_page_length of nand_onfi_params{}. > + * The followings are the unknown length sections. s/followings/following/ s/unknown /variable-/ > + * So we do not add any fields below. Please see the onfi spec. s/onfi/ONFI/ > + */ > +} __attribute__((packed)); > + > /** > * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices > * @lock: protection lock Brian
于 2013年04月22日 12:24, Brian Norris 写道: > On Mon, Mar 18, 2013 at 4:18 AM, Huang Shijie<b32955@freescale.com> wrote: >> Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page >> to store the ECC info. >> >> The onfi spec tells us that if the nand chip's recommended ECC codeword >> size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then >> read the Extended ECC information that is part of the extended parameter >> page to retrieve the ECC requirements for this device. >> >> This patch adds >> [1] the neccessary fields for nand_onfi_params{}, >> [2] and adds the ext_ecc_info{} for Extended ECC information, >> [3] adds ext_section{} for extended sections, >> [4] and adds ext_param_page{} for the Extended Parameter Page. >> >> Signed-off-by: Huang Shijie<b32955@freescale.com> >> --- >> include/linux/mtd/nand.h | 39 ++++++++++++++++++++++++++++++++++++++- >> 1 files changed, 38 insertions(+), 1 deletions(-) >> >> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h >> index 9779e3e..94ae957 100644 >> --- a/include/linux/mtd/nand.h >> +++ b/include/linux/mtd/nand.h >> @@ -217,7 +217,10 @@ struct nand_onfi_params { >> __le16 revision; >> __le16 features; >> __le16 opt_cmd; >> - u8 reserved[22]; >> + u8 reserved0[2]; >> + __le16 ext_param_page_length; /* since onfi 2.1 */ >> + u8 num_of_param_pages; /* since onfi 2.1 */ >> + u8 reserved1[17]; >> >> /* manufacturer information block */ >> char manufacturer[12]; >> @@ -274,6 +277,40 @@ struct nand_onfi_params { >> >> #define ONFI_CRC_BASE 0x4F4E >> >> +/* Extended ECC information Block Definition (since onfi 2.1) */ >> +struct ext_ecc_info { > Should include NAND and/or ONFI in the name (e.g., onfi_ext_ecc_info) > >> + u8 ecc_bits; >> + u8 codeword_size; >> + __le16 bb_per_lun; >> + __le16 block_endurance; >> + u8 reserved[2]; >> +} __attribute__((packed)); >> + >> +#define SECTION_TYPE_0 0 /* Unused section. */ >> +#define SECTION_TYPE_1 1 /* for additional sections. */ >> +#define SECTION_TYPE_2 2 /* for ECC information. */ > Should prefix these with ONFI_ > >> +struct ext_section { > Also needs an ONFI prefix, e.g., onfi_ext_section > >> + u8 type; >> + u8 length; >> +} __attribute__((packed)); >> + >> +#define EXT_SECTION_MAX 8 > Also should be prefixed ONFI_ > >> + >> +/* Extended Parameter Page Definition (since onfi 2.1) */ >> +struct ext_param_page { > onfi_ext_param_page > >> + __le16 crc; >> + u8 sig[4]; /* 'E' 'P' 'P' 'S' */ >> + u8 reserved0[10]; >> + struct ext_section sections[EXT_SECTION_MAX]; >> + >> + /* >> + * The actual size of the Extended Parameter Page is in >> + * @ext_param_page_length of nand_onfi_params{}. >> + * The followings are the unknown length sections. > s/followings/following/ > s/unknown /variable-/ > >> + * So we do not add any fields below. Please see the onfi spec. > s/onfi/ONFI/ > >> + */ >> +} __attribute__((packed)); >> + >> /** >> * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices >> * @lock: protection lock > thanks Brian. I will fix it in next version. Huang Shijie
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 9779e3e..94ae957 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -217,7 +217,10 @@ struct nand_onfi_params { __le16 revision; __le16 features; __le16 opt_cmd; - u8 reserved[22]; + u8 reserved0[2]; + __le16 ext_param_page_length; /* since onfi 2.1 */ + u8 num_of_param_pages; /* since onfi 2.1 */ + u8 reserved1[17]; /* manufacturer information block */ char manufacturer[12]; @@ -274,6 +277,40 @@ struct nand_onfi_params { #define ONFI_CRC_BASE 0x4F4E +/* Extended ECC information Block Definition (since onfi 2.1) */ +struct ext_ecc_info { + u8 ecc_bits; + u8 codeword_size; + __le16 bb_per_lun; + __le16 block_endurance; + u8 reserved[2]; +} __attribute__((packed)); + +#define SECTION_TYPE_0 0 /* Unused section. */ +#define SECTION_TYPE_1 1 /* for additional sections. */ +#define SECTION_TYPE_2 2 /* for ECC information. */ +struct ext_section { + u8 type; + u8 length; +} __attribute__((packed)); + +#define EXT_SECTION_MAX 8 + +/* Extended Parameter Page Definition (since onfi 2.1) */ +struct ext_param_page { + __le16 crc; + u8 sig[4]; /* 'E' 'P' 'P' 'S' */ + u8 reserved0[10]; + struct ext_section sections[EXT_SECTION_MAX]; + + /* + * The actual size of the Extended Parameter Page is in + * @ext_param_page_length of nand_onfi_params{}. + * The followings are the unknown length sections. + * So we do not add any fields below. Please see the onfi spec. + */ +} __attribute__((packed)); + /** * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices * @lock: protection lock
Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page to store the ECC info. The onfi spec tells us that if the nand chip's recommended ECC codeword size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then read the Extended ECC information that is part of the extended parameter page to retrieve the ECC requirements for this device. This patch adds [1] the neccessary fields for nand_onfi_params{}, [2] and adds the ext_ecc_info{} for Extended ECC information, [3] adds ext_section{} for extended sections, [4] and adds ext_param_page{} for the Extended Parameter Page. Signed-off-by: Huang Shijie <b32955@freescale.com> --- include/linux/mtd/nand.h | 39 ++++++++++++++++++++++++++++++++++++++- 1 files changed, 38 insertions(+), 1 deletions(-)