diff mbox

[v2] ARM: mxs: Select ARM_CPU_SUSPEND

Message ID 1360201645-2456-1-git-send-email-festevam@gmail.com
State New
Headers show

Commit Message

Fabio Estevam Feb. 7, 2013, 1:47 a.m. UTC 
From: Fabio Estevam <fabio.estevam@freescale.com>

Select ARM_CPU_SUSPEND so that suspend/resume can be tested on mxs platforms.

Tested on a mx28evk board:

$ echo enabled > /sys/devices/80000000.apb/80040000.apbx/80074000.serial/tty/ttyAMA0/power/wakeup
$ echo mem > /sys/power/state
[  507.040000] PM: Syncing filesystems ... done.
[  507.060000] mmc0: card e624 removed
[  507.160000] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  507.180000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  507.200000] Suspending console(s) (use no_console_suspend to debug)

(Then send any character via DUART to wakeup the system).

[  507.220000] PM: suspend of devices complete after 10.468 msecs
[  507.220000] PM: late suspend of devices complete after 3.531 msecs
[  507.230000] PM: noirq suspend of devices complete after 5.187 msecs
[  507.230000] PM: noirq resume of devices complete after 2.312 msecs
[  507.230000] PM: early resume of devices complete after 2.437 msecs
[  507.320000] PM: resume of devices complete after 81.312 msecs
[  507.360000] Restarting tasks ... done.
[  507.530000] mmc0: new SDHC card at address e624
[  507.550000] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[  507.560000]  mmcblk0: p1 p2 p3
[  509.240000] libphy: 800f0000.etherne:01 - Link is Down
[  511.240000] libphy: 800f0000.etherne:01 - Link is Up

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Replace AUART with DUART, since ttyAMA0 is the debug UART.

 arch/arm/mach-mxs/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

Comments

Shawn Guo Feb. 7, 2013, 5:21 a.m. UTC | #1 
On Wed, Feb 06, 2013 at 11:47:25PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Select ARM_CPU_SUSPEND so that suspend/resume can be tested on mxs platforms.
> 
> Tested on a mx28evk board:
> 
> $ echo enabled > /sys/devices/80000000.apb/80040000.apbx/80074000.serial/tty/ttyAMA0/power/wakeup
> $ echo mem > /sys/power/state
> [  507.040000] PM: Syncing filesystems ... done.
> [  507.060000] mmc0: card e624 removed
> [  507.160000] Freezing user space processes ... (elapsed 0.01 seconds) done.
> [  507.180000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> [  507.200000] Suspending console(s) (use no_console_suspend to debug)
> 
> (Then send any character via DUART to wakeup the system).
> 
> [  507.220000] PM: suspend of devices complete after 10.468 msecs
> [  507.220000] PM: late suspend of devices complete after 3.531 msecs
> [  507.230000] PM: noirq suspend of devices complete after 5.187 msecs
> [  507.230000] PM: noirq resume of devices complete after 2.312 msecs
> [  507.230000] PM: early resume of devices complete after 2.437 msecs
> [  507.320000] PM: resume of devices complete after 81.312 msecs
> [  507.360000] Restarting tasks ... done.
> [  507.530000] mmc0: new SDHC card at address e624
> [  507.550000] mmcblk0: mmc0:e624 SU04G 3.69 GiB
> [  507.560000]  mmcblk0: p1 p2 p3
> [  509.240000] libphy: 800f0000.etherne:01 - Link is Down
> [  511.240000] libphy: 800f0000.etherne:01 - Link is Up
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

It's late for 3.9, so queued it for 3.10.

Shawn
diff mbox

Patch

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ecc4319..c4495a1 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -3,6 +3,7 @@  if ARCH_MXS
 config SOC_IMX23
 	bool
 	select ARM_AMBA
+	select ARM_CPU_SUSPEND if PM
 	select CPU_ARM926T
 	select HAVE_PWM
 	select PINCTRL_IMX23
@@ -10,6 +11,7 @@  config SOC_IMX23
 config SOC_IMX28
 	bool
 	select ARM_AMBA
+	select ARM_CPU_SUSPEND if PM
 	select CPU_ARM926T
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_PWM