| Message ID | 1345194509-29203-1-git-send-email-hong-hua.yin@freescale.com |
|---|---|
| State | New |
| Headers | show |
Dear All, I can't find MAINTAINER of hw/loader.c. Who can help review and apply this patch? Best Regards, Olivia Yin > -----Original Message----- > From: Yin Olivia-R63875 > Sent: Friday, August 17, 2012 5:08 PM > To: qemu-ppc@nongnu.org; qemu-devel@nongnu.org > Cc: Yin Olivia-R63875 > Subject: [PATCH v2] register reset handler to write image into memory > > Instead of add rom blobs, this patch just write them directly to memory. > > This patch registers reset handler uimage_reset() and image_file_reset() > which load images into RAM during initial bootup and VM reset. > > v2: use g_file_get_content() to load load image file. > > Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> > --- > This patch is based on branch 'ppc-next' of Alex's upstream QEMU repo: > http://repo.or.cz/r/qemu/agraf.git > > hw/loader.c | 88 ++++++++++++++++++++++++++++++++++++++++++++--------- > ------ > 1 files changed, 66 insertions(+), 22 deletions(-) > > diff --git a/hw/loader.c b/hw/loader.c > index 33acc2f..0be8bf7 100644 > --- a/hw/loader.c > +++ b/hw/loader.c > @@ -56,6 +56,12 @@ > > static int roms_loaded; > > +typedef struct ImageFile ImageFile; > +struct ImageFile { > + char *name; > + target_phys_addr_t addr; > +}; > + > /* return the size or -1 if error */ > int get_image_size(const char *filename) { @@ -86,6 +92,24 @@ int > load_image(const char *filename, uint8_t *addr) > return size; > } > > +static void image_file_reset(void *opaque) { > + ImageFile *image = opaque; > + GError *err = NULL; > + gboolean res; > + gchar *content; > + gsize size; > + > + res = g_file_get_contents(image->name, &content, &size, &err); > + if (res == FALSE) { > + error_report("failed to read image file: %s\n", image->name); > + g_error_free(err); > + } else { > + cpu_physical_memory_rw(image->addr, (uint8_t *)content, size, 1); > + g_free(content); > + } > +} > + > /* read()-like version */ > ssize_t read_targphys(const char *name, > int fd, target_phys_addr_t dst_addr, size_t nbytes) > @@ -112,7 +136,12 @@ int load_image_targphys(const char *filename, > return -1; > } > if (size > 0) { > - rom_add_file_fixed(filename, addr, -1); > + ImageFile *image; > + image = g_malloc0(sizeof(*image)); > + image->name = g_strdup(filename); > + image->addr = addr; > + > + qemu_register_reset(image_file_reset, image); > } > return size; > } > @@ -433,15 +462,14 @@ static ssize_t gunzip(void *dst, size_t dstlen, > uint8_t *src, > return dstbytes; > } > > -/* Load a U-Boot image. */ > -int load_uimage(const char *filename, target_phys_addr_t *ep, > - target_phys_addr_t *loadaddr, int *is_linux) > +/* write uimage into memory */ > +static int uimage_physical_loader(const char *filename, uint8_t **data, > + target_phys_addr_t *loadaddr) > { > int fd; > int size; > uboot_image_header_t h; > uboot_image_header_t *hdr = &h; > - uint8_t *data = NULL; > int ret = -1; > > fd = open(filename, O_RDONLY | O_BINARY); @@ -474,18 +502,9 @@ int > load_uimage(const char *filename, target_phys_addr_t *ep, > goto out; > } > > - /* TODO: Check CPU type. */ > - if (is_linux) { > - if (hdr->ih_os == IH_OS_LINUX) > - *is_linux = 1; > - else > - *is_linux = 0; > - } > - > - *ep = hdr->ih_ep; > - data = g_malloc(hdr->ih_size); > + *data = g_malloc(hdr->ih_size); > > - if (read(fd, data, hdr->ih_size) != hdr->ih_size) { > + if (read(fd, *data, hdr->ih_size) != hdr->ih_size) { > fprintf(stderr, "Error reading file\n"); > goto out; > } > @@ -495,11 +514,11 @@ int load_uimage(const char *filename, > target_phys_addr_t *ep, > size_t max_bytes; > ssize_t bytes; > > - compressed_data = data; > + compressed_data = *data; > max_bytes = UBOOT_MAX_GUNZIP_BYTES; > - data = g_malloc(max_bytes); > + *data = g_malloc(max_bytes); > > - bytes = gunzip(data, max_bytes, compressed_data, hdr->ih_size); > + bytes = gunzip(*data, max_bytes, compressed_data, > + hdr->ih_size); > g_free(compressed_data); > if (bytes < 0) { > fprintf(stderr, "Unable to decompress gzipped image!\n"); @@ > -508,7 +527,6 @@ int load_uimage(const char *filename, target_phys_addr_t > *ep, > hdr->ih_size = bytes; > } > > - rom_add_blob_fixed(filename, data, hdr->ih_size, hdr->ih_load); > > if (loadaddr) > *loadaddr = hdr->ih_load; > @@ -516,12 +534,38 @@ int load_uimage(const char *filename, > target_phys_addr_t *ep, > ret = hdr->ih_size; > > out: > - if (data) > - g_free(data); > close(fd); > return ret; > } > > +static void uimage_reset(void *opaque) > +{ > + ImageFile *image = opaque; > + uint8_t *data = NULL; > + int size; > + > + size = uimage_physical_loader(image->name, &data, &image->addr); > + cpu_physical_memory_rw(image->addr, data, size, 1); > + g_free(data); > +} > + > +/* Load a U-Boot image. */ > +int load_uimage(const char *filename, target_phys_addr_t *ep, > + target_phys_addr_t *loadaddr, int *is_linux) { > + int size; > + ImageFile *image; > + uint8_t *data = NULL; > + > + size= uimage_physical_loader(filename, &data, loadaddr); > + g_free(data); > + image = g_malloc0(sizeof(*image)); > + image->name = g_strdup(filename); > + image->addr = *loadaddr; > + qemu_register_reset(uimage_reset, image); > + return size; > +} > + > /* > * Functions for reboot-persistent memory regions. > * - used for vga bios and option roms. > -- > 1.7.1
2012/8/23 Yin Olivia-R63875 <r63875@freescale.com>: > Dear All, > > I can't find MAINTAINER of hw/loader.c. > Who can help review and apply this patch? > Please use the script scripts/get_maintainer.pl, like: $ scripts/get_maintainer.pl your_patch_file.patch or $ scripts/get_maintainer.pl -f hw/loader.c > Best Regards, > Olivia Yin >
Hi, Am 23.08.2012 11:45, schrieb Yin Olivia-R63875: > Dear All, > > I can't find MAINTAINER of hw/loader.c. > Who can help review and apply this patch? This patch is not a small bugfix so it won't be applied during the v1.2 Hard Freeze. You based it onto ppc-next so the obvious answer is, Alex needs to review it, whom you forgot to cc. This patch does not answer the question why you try to avoid the ROM blobs and what ROM blobs are still being used for after your patch. I don't think it makes much sense to work around them for your use cases and to leave them behind - if there's something fundamentally wrong with them they should be ripped out completely or fixed. But maybe I'm misunderstanding in the absence of explanations? Regards, Andreas > > Best Regards, > Olivia Yin > >> -----Original Message----- >> From: Yin Olivia-R63875 >> Sent: Friday, August 17, 2012 5:08 PM >> To: qemu-ppc@nongnu.org; qemu-devel@nongnu.org >> Cc: Yin Olivia-R63875 >> Subject: [PATCH v2] register reset handler to write image into memory >> >> Instead of add rom blobs, this patch just write them directly to memory. >> >> This patch registers reset handler uimage_reset() and image_file_reset() >> which load images into RAM during initial bootup and VM reset. >> >> v2: use g_file_get_content() to load load image file. >> >> Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> >> --- >> This patch is based on branch 'ppc-next' of Alex's upstream QEMU repo: >> http://repo.or.cz/r/qemu/agraf.git >> >> hw/loader.c | 88 ++++++++++++++++++++++++++++++++++++++++++++--------- >> ------ >> 1 files changed, 66 insertions(+), 22 deletions(-) >> >> diff --git a/hw/loader.c b/hw/loader.c >> index 33acc2f..0be8bf7 100644 >> --- a/hw/loader.c >> +++ b/hw/loader.c >> @@ -56,6 +56,12 @@ >> >> static int roms_loaded; >> >> +typedef struct ImageFile ImageFile; >> +struct ImageFile { >> + char *name; >> + target_phys_addr_t addr; >> +}; >> + >> /* return the size or -1 if error */ >> int get_image_size(const char *filename) { @@ -86,6 +92,24 @@ int >> load_image(const char *filename, uint8_t *addr) >> return size; >> } >> >> +static void image_file_reset(void *opaque) { >> + ImageFile *image = opaque; >> + GError *err = NULL; >> + gboolean res; >> + gchar *content; >> + gsize size; >> + >> + res = g_file_get_contents(image->name, &content, &size, &err); >> + if (res == FALSE) { >> + error_report("failed to read image file: %s\n", image->name); >> + g_error_free(err); >> + } else { >> + cpu_physical_memory_rw(image->addr, (uint8_t *)content, size, 1); >> + g_free(content); >> + } >> +} >> + >> /* read()-like version */ >> ssize_t read_targphys(const char *name, >> int fd, target_phys_addr_t dst_addr, size_t nbytes) >> @@ -112,7 +136,12 @@ int load_image_targphys(const char *filename, >> return -1; >> } >> if (size > 0) { >> - rom_add_file_fixed(filename, addr, -1); >> + ImageFile *image; >> + image = g_malloc0(sizeof(*image)); >> + image->name = g_strdup(filename); >> + image->addr = addr; >> + >> + qemu_register_reset(image_file_reset, image); >> } >> return size; >> } >> @@ -433,15 +462,14 @@ static ssize_t gunzip(void *dst, size_t dstlen, >> uint8_t *src, >> return dstbytes; >> } >> >> -/* Load a U-Boot image. */ >> -int load_uimage(const char *filename, target_phys_addr_t *ep, >> - target_phys_addr_t *loadaddr, int *is_linux) >> +/* write uimage into memory */ >> +static int uimage_physical_loader(const char *filename, uint8_t **data, >> + target_phys_addr_t *loadaddr) >> { >> int fd; >> int size; >> uboot_image_header_t h; >> uboot_image_header_t *hdr = &h; >> - uint8_t *data = NULL; >> int ret = -1; >> >> fd = open(filename, O_RDONLY | O_BINARY); @@ -474,18 +502,9 @@ int >> load_uimage(const char *filename, target_phys_addr_t *ep, >> goto out; >> } >> >> - /* TODO: Check CPU type. */ >> - if (is_linux) { >> - if (hdr->ih_os == IH_OS_LINUX) >> - *is_linux = 1; >> - else >> - *is_linux = 0; >> - } >> - >> - *ep = hdr->ih_ep; >> - data = g_malloc(hdr->ih_size); >> + *data = g_malloc(hdr->ih_size); >> >> - if (read(fd, data, hdr->ih_size) != hdr->ih_size) { >> + if (read(fd, *data, hdr->ih_size) != hdr->ih_size) { >> fprintf(stderr, "Error reading file\n"); >> goto out; >> } >> @@ -495,11 +514,11 @@ int load_uimage(const char *filename, >> target_phys_addr_t *ep, >> size_t max_bytes; >> ssize_t bytes; >> >> - compressed_data = data; >> + compressed_data = *data; >> max_bytes = UBOOT_MAX_GUNZIP_BYTES; >> - data = g_malloc(max_bytes); >> + *data = g_malloc(max_bytes); >> >> - bytes = gunzip(data, max_bytes, compressed_data, hdr->ih_size); >> + bytes = gunzip(*data, max_bytes, compressed_data, >> + hdr->ih_size); >> g_free(compressed_data); >> if (bytes < 0) { >> fprintf(stderr, "Unable to decompress gzipped image!\n"); @@ >> -508,7 +527,6 @@ int load_uimage(const char *filename, target_phys_addr_t >> *ep, >> hdr->ih_size = bytes; >> } >> >> - rom_add_blob_fixed(filename, data, hdr->ih_size, hdr->ih_load); >> >> if (loadaddr) >> *loadaddr = hdr->ih_load; >> @@ -516,12 +534,38 @@ int load_uimage(const char *filename, >> target_phys_addr_t *ep, >> ret = hdr->ih_size; >> >> out: >> - if (data) >> - g_free(data); >> close(fd); >> return ret; >> } >> >> +static void uimage_reset(void *opaque) >> +{ >> + ImageFile *image = opaque; >> + uint8_t *data = NULL; >> + int size; >> + >> + size = uimage_physical_loader(image->name, &data, &image->addr); >> + cpu_physical_memory_rw(image->addr, data, size, 1); >> + g_free(data); >> +} >> + >> +/* Load a U-Boot image. */ >> +int load_uimage(const char *filename, target_phys_addr_t *ep, >> + target_phys_addr_t *loadaddr, int *is_linux) { >> + int size; >> + ImageFile *image; >> + uint8_t *data = NULL; >> + >> + size= uimage_physical_loader(filename, &data, loadaddr); >> + g_free(data); >> + image = g_malloc0(sizeof(*image)); >> + image->name = g_strdup(filename); >> + image->addr = *loadaddr; >> + qemu_register_reset(uimage_reset, image); >> + return size; >> +} >> + >> /* >> * Functions for reboot-persistent memory regions. >> * - used for vga bios and option roms. >> -- >> 1.7.1 > > >
On 23.08.2012, at 13:38, Andreas Färber wrote: > Hi, > > Am 23.08.2012 11:45, schrieb Yin Olivia-R63875: >> Dear All, >> >> I can't find MAINTAINER of hw/loader.c. >> Who can help review and apply this patch? > > This patch is not a small bugfix so it won't be applied during the v1.2 > Hard Freeze. You based it onto ppc-next so the obvious answer is, Alex > needs to review it, whom you forgot to cc. > > This patch does not answer the question why you try to avoid the ROM > blobs and what ROM blobs are still being used for after your patch. I > don't think it makes much sense to work around them for your use cases > and to leave them behind - if there's something fundamentally wrong with > them they should be ripped out completely or fixed. But maybe I'm > misunderstanding in the absence of explanations? The fundamental problem is the memory footprint. We only need ROM blobs on reset, where they get copied into guest RAM. That means during the lifetime of the VM, we waste host memory for no good reason. Imagine a guest that runs with -kernel and -initrd, each 10MB in size. Then that VM wastes 20MB of precious host memory. Eventually, I don't think we will need the full-blown rom interface with in-memory rom blobs anymore. Everything should be constructed on demand during reset. However, if you look at code like the s390 initialization, some users of the rom interface expect changes done once to be persistent. These will have to be rewritten to redo their changes on reset. So Olivia, please do the following: - Make sure that _no_ persistent rom code is left over eventually. This also means that you need to convert ELF. - Go through every user of rom_ptr and write the code differently. For now, probably by just registering a reset handler that overwrites the respective memory location on every reset, rather than modify the rom blob. Alex
Hi Alex, I checked all the rom_add_*() functions. Multiple platforms of different architectures use rom_add_* to save images. hw/arm_boot.c hw/exynos4210. hw/highbank. hw/mips_fulong2e.c hw/mips_malta.c hw/mips_r4k.c hw/r2d.c Even for PowerPC, it also use rom_add_blob() to write dtb in memory. hw/ppc/e500.c: rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); hw/ppc440_bamboo.c You also minder that ELF file. hw/elf_ops.h: rom_add_blob_fixed(label, data, mem_size, addr); pstrcpy_targphys() does also call rom_add_blob_fixed() function, so we need also verify hw/alpha_dp264.c hw/cris-boot.c hw/lm32_boards.c hw/microblaze_boot.c hw/milkymist.c hw/ppc.c hw/ppc_newworld.c hw/ppc_oldworld.c hw/sun4m.c hw/sun4m.c Should we register reset handler for each above user? The callers of rom_ptr() function: hw/s390-virtio.c hw/sun4m.c hw/sun4u.c target-arm/cpu.c But I don't understand why rom_ptr should be changed. Best Regards, Olivia > -----Original Message----- > From: Alexander Graf [mailto:agraf@suse.de] > Sent: Thursday, September 20, 2012 8:10 PM > To: Andreas Färber > Cc: Yin Olivia-R63875; qemu-ppc@nongnu.org; qemu-devel@nongnu.org > Subject: Re: [Qemu-devel] [PATCH v2] register reset handler to write > image into memory > > > On 23.08.2012, at 13:38, Andreas Färber wrote: > > > Hi, > > > > Am 23.08.2012 11:45, schrieb Yin Olivia-R63875: > >> Dear All, > >> > >> I can't find MAINTAINER of hw/loader.c. > >> Who can help review and apply this patch? > > > > This patch is not a small bugfix so it won't be applied during the > > v1.2 Hard Freeze. You based it onto ppc-next so the obvious answer is, > > Alex needs to review it, whom you forgot to cc. > > > > This patch does not answer the question why you try to avoid the ROM > > blobs and what ROM blobs are still being used for after your patch. I > > don't think it makes much sense to work around them for your use cases > > and to leave them behind - if there's something fundamentally wrong > > with them they should be ripped out completely or fixed. But maybe I'm > > misunderstanding in the absence of explanations? > > The fundamental problem is the memory footprint. We only need ROM blobs > on reset, where they get copied into guest RAM. That means during the > lifetime of the VM, we waste host memory for no good reason. Imagine a > guest that runs with -kernel and -initrd, each 10MB in size. Then that VM > wastes 20MB of precious host memory. > > Eventually, I don't think we will need the full-blown rom interface with > in-memory rom blobs anymore. Everything should be constructed on demand > during reset. > > However, if you look at code like the s390 initialization, some users of > the rom interface expect changes done once to be persistent. These will > have to be rewritten to redo their changes on reset. > > So Olivia, please do the following: > > - Make sure that _no_ persistent rom code is left over eventually. This > also means that you need to convert ELF. > - Go through every user of rom_ptr and write the code differently. For > now, probably by just registering a reset handler that overwrites the > respective memory location on every reset, rather than modify the rom > blob. > > > Alex >
On 26.09.2012, at 10:13, Yin Olivia-R63875 wrote: > Hi Alex, > > I checked all the rom_add_*() functions. > Multiple platforms of different architectures use rom_add_* to save images. > hw/arm_boot.c > hw/exynos4210. > hw/highbank. > hw/mips_fulong2e.c > hw/mips_malta.c > hw/mips_r4k.c > hw/r2d.c > > Even for PowerPC, it also use rom_add_blob() to write dtb in memory. > hw/ppc/e500.c: rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); > hw/ppc440_bamboo.c > > You also minder that ELF file. > hw/elf_ops.h: rom_add_blob_fixed(label, data, mem_size, addr); > > pstrcpy_targphys() does also call rom_add_blob_fixed() function, so we need also verify > hw/alpha_dp264.c > hw/cris-boot.c > hw/lm32_boards.c > hw/microblaze_boot.c > hw/milkymist.c > hw/ppc.c > hw/ppc_newworld.c > hw/ppc_oldworld.c > hw/sun4m.c > hw/sun4m.c > > Should we register reset handler for each above user? I suppose we should decide on a case-by-case basis. If it's easy to reconstruct the binary, convert it to a reset handler. It it's too hard, leave it to whoever cares about the board. > The callers of rom_ptr() function: > hw/s390-virtio.c > hw/sun4m.c > hw/sun4u.c > target-arm/cpu.c > But I don't understand why rom_ptr should be changed. Because rom_ptr works on roms. When we get rid of roms, rom_ptr won't work anymore, because there is no in-memory representation of the rom to work on. So instead of calling rom_ptr, the respective code should have a reset handler that gets invoked after the rom restore handler (or a callback function?) which can restore the change to the rom that code wants to do. Alex
diff --git a/hw/loader.c b/hw/loader.c index 33acc2f..0be8bf7 100644 --- a/hw/loader.c +++ b/hw/loader.c @@ -56,6 +56,12 @@ static int roms_loaded; +typedef struct ImageFile ImageFile; +struct ImageFile { + char *name; + target_phys_addr_t addr; +}; + /* return the size or -1 if error */ int get_image_size(const char *filename) { @@ -86,6 +92,24 @@ int load_image(const char *filename, uint8_t *addr) return size; } +static void image_file_reset(void *opaque) +{ + ImageFile *image = opaque; + GError *err = NULL; + gboolean res; + gchar *content; + gsize size; + + res = g_file_get_contents(image->name, &content, &size, &err); + if (res == FALSE) { + error_report("failed to read image file: %s\n", image->name); + g_error_free(err); + } else { + cpu_physical_memory_rw(image->addr, (uint8_t *)content, size, 1); + g_free(content); + } +} + /* read()-like version */ ssize_t read_targphys(const char *name, int fd, target_phys_addr_t dst_addr, size_t nbytes) @@ -112,7 +136,12 @@ int load_image_targphys(const char *filename, return -1; } if (size > 0) { - rom_add_file_fixed(filename, addr, -1); + ImageFile *image; + image = g_malloc0(sizeof(*image)); + image->name = g_strdup(filename); + image->addr = addr; + + qemu_register_reset(image_file_reset, image); } return size; } @@ -433,15 +462,14 @@ static ssize_t gunzip(void *dst, size_t dstlen, uint8_t *src, return dstbytes; } -/* Load a U-Boot image. */ -int load_uimage(const char *filename, target_phys_addr_t *ep, - target_phys_addr_t *loadaddr, int *is_linux) +/* write uimage into memory */ +static int uimage_physical_loader(const char *filename, uint8_t **data, + target_phys_addr_t *loadaddr) { int fd; int size; uboot_image_header_t h; uboot_image_header_t *hdr = &h; - uint8_t *data = NULL; int ret = -1; fd = open(filename, O_RDONLY | O_BINARY); @@ -474,18 +502,9 @@ int load_uimage(const char *filename, target_phys_addr_t *ep, goto out; } - /* TODO: Check CPU type. */ - if (is_linux) { - if (hdr->ih_os == IH_OS_LINUX) - *is_linux = 1; - else - *is_linux = 0; - } - - *ep = hdr->ih_ep; - data = g_malloc(hdr->ih_size); + *data = g_malloc(hdr->ih_size); - if (read(fd, data, hdr->ih_size) != hdr->ih_size) { + if (read(fd, *data, hdr->ih_size) != hdr->ih_size) { fprintf(stderr, "Error reading file\n"); goto out; } @@ -495,11 +514,11 @@ int load_uimage(const char *filename, target_phys_addr_t *ep, size_t max_bytes; ssize_t bytes; - compressed_data = data; + compressed_data = *data; max_bytes = UBOOT_MAX_GUNZIP_BYTES; - data = g_malloc(max_bytes); + *data = g_malloc(max_bytes); - bytes = gunzip(data, max_bytes, compressed_data, hdr->ih_size); + bytes = gunzip(*data, max_bytes, compressed_data, hdr->ih_size); g_free(compressed_data); if (bytes < 0) { fprintf(stderr, "Unable to decompress gzipped image!\n"); @@ -508,7 +527,6 @@ int load_uimage(const char *filename, target_phys_addr_t *ep, hdr->ih_size = bytes; } - rom_add_blob_fixed(filename, data, hdr->ih_size, hdr->ih_load); if (loadaddr) *loadaddr = hdr->ih_load; @@ -516,12 +534,38 @@ int load_uimage(const char *filename, target_phys_addr_t *ep, ret = hdr->ih_size; out: - if (data) - g_free(data); close(fd); return ret; } +static void uimage_reset(void *opaque) +{ + ImageFile *image = opaque; + uint8_t *data = NULL; + int size; + + size = uimage_physical_loader(image->name, &data, &image->addr); + cpu_physical_memory_rw(image->addr, data, size, 1); + g_free(data); +} + +/* Load a U-Boot image. */ +int load_uimage(const char *filename, target_phys_addr_t *ep, + target_phys_addr_t *loadaddr, int *is_linux) +{ + int size; + ImageFile *image; + uint8_t *data = NULL; + + size= uimage_physical_loader(filename, &data, loadaddr); + g_free(data); + image = g_malloc0(sizeof(*image)); + image->name = g_strdup(filename); + image->addr = *loadaddr; + qemu_register_reset(uimage_reset, image); + return size; +} + /* * Functions for reboot-persistent memory regions. * - used for vga bios and option roms.
Instead of add rom blobs, this patch just write them directly to memory. This patch registers reset handler uimage_reset() and image_file_reset() which load images into RAM during initial bootup and VM reset. v2: use g_file_get_content() to load load image file. Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> --- This patch is based on branch 'ppc-next' of Alex's upstream QEMU repo: http://repo.or.cz/r/qemu/agraf.git hw/loader.c | 88 ++++++++++++++++++++++++++++++++++++++++++++--------------- 1 files changed, 66 insertions(+), 22 deletions(-)