diff mbox

SME: correctly check mode HT caps for enabling OBSS scan

Message ID 1342642222-23791-1-git-send-email-arik@wizery.com
State Accepted
Commit b6871ebb1735e86ef02d59318d790f336844e822
Headers show

Commit Message

Arik Nemtsov July 18, 2012, 8:10 p.m. UTC 
Don't assume the 11g mode is always first in the list of mode (sometimes
it isn't). Traverse the array of modes and check the HT40 capability is
turned on for 11g.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
---
 wpa_supplicant/sme.c |   19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

Comments

Jouni Malinen Aug. 11, 2012, 2:09 p.m. UTC | #1 
On Wed, Jul 18, 2012 at 11:10:22PM +0300, Arik Nemtsov wrote:
> Don't assume the 11g mode is always first in the list of mode (sometimes
> it isn't). Traverse the array of modes and check the HT40 capability is
> turned on for 11g.

Thanks, applied.
diff mbox

Patch

diff --git a/wpa_supplicant/sme.c b/wpa_supplicant/sme.c
index c7187e4..a82cb95 100644
--- a/wpa_supplicant/sme.c
+++ b/wpa_supplicant/sme.c
@@ -843,6 +843,8 @@  void sme_sched_obss_scan(struct wpa_supplicant *wpa_s, int enable)
 	const u8 *ie;
 	struct wpa_bss *bss = wpa_s->current_bss;
 	struct wpa_ssid *ssid = wpa_s->current_ssid;
+	struct hostapd_hw_modes *hw_mode = NULL;
+	int i;
 
 	eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
 	wpa_s->sme.sched_obss_scan = 0;
@@ -853,9 +855,20 @@  void sme_sched_obss_scan(struct wpa_supplicant *wpa_s, int enable)
 	    ssid->mode != IEEE80211_MODE_INFRA)
 		return; /* Not using station SME in wpa_supplicant */
 
-	if (!wpa_s->hw.modes ||
-	    !(wpa_s->hw.modes->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
-		return; /* Driver does not support HT40 */
+	if (!wpa_s->hw.modes)
+		return;
+
+	/* only HT caps in 11g mode are relevant */
+	for (i = 0; i < wpa_s->hw.num_modes; i++) {
+		hw_mode = &wpa_s->hw.modes[i];
+		if (hw_mode->mode == HOSTAPD_MODE_IEEE80211G)
+			break;
+	}
+
+	/* Driver does not support HT40 for 11g or doesn't have 11g. */
+	if (i == wpa_s->hw.num_modes || !hw_mode ||
+	    !(hw_mode->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
+		return;
 
 	if (bss == NULL || bss->freq < 2400 || bss->freq > 2500)
 		return; /* Not associated on 2.4 GHz band */