diff mbox

[4/5] ARM: mxs: do not add dma device by default

Message ID 1334753197-12032-5-git-send-email-b29396@freescale.com
State New
Headers show

Commit Message

Dong Aisheng April 18, 2012, 12:46 p.m. UTC 
From: Dong Aisheng <dong.aisheng@linaro.org>

This will cause conflict when dt is enabled.
So let each platform add dma devices respectively.

Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Huang Shijie <b32955@freescale.com>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
---
 arch/arm/mach-mxs/devices-mx23.h                |    2 ++
 arch/arm/mach-mxs/devices-mx28.h                |    2 ++
 arch/arm/mach-mxs/devices/platform-dma.c        |    3 +--
 arch/arm/mach-mxs/include/mach/devices-common.h |    3 +++
 arch/arm/mach-mxs/mach-apx4devkit.c             |    1 +
 arch/arm/mach-mxs/mach-m28evk.c                 |    1 +
 arch/arm/mach-mxs/mach-mx23evk.c                |    1 +
 arch/arm/mach-mxs/mach-stmp378x_devb.c          |    1 +
 arch/arm/mach-mxs/mach-tx28.c                   |    1 +
 9 files changed, 13 insertions(+), 2 deletions(-)

Comments

Marek Vasut April 18, 2012, 6:03 p.m. UTC | #1 
Dear Dong Aisheng,

> From: Dong Aisheng <dong.aisheng@linaro.org>
> 
> This will cause conflict when dt is enabled.
> So let each platform add dma devices respectively.
> 
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Huang Shijie <b32955@freescale.com>
> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>

Reviewed-by: Marek Vasut <marex@denx.de>

> ---
>  arch/arm/mach-mxs/devices-mx23.h                |    2 ++
>  arch/arm/mach-mxs/devices-mx28.h                |    2 ++
>  arch/arm/mach-mxs/devices/platform-dma.c        |    3 +--
>  arch/arm/mach-mxs/include/mach/devices-common.h |    3 +++
>  arch/arm/mach-mxs/mach-apx4devkit.c             |    1 +
>  arch/arm/mach-mxs/mach-m28evk.c                 |    1 +
>  arch/arm/mach-mxs/mach-mx23evk.c                |    1 +
>  arch/arm/mach-mxs/mach-stmp378x_devb.c          |    1 +
>  arch/arm/mach-mxs/mach-tx28.c                   |    1 +
>  9 files changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/devices-mx23.h
> b/arch/arm/mach-mxs/devices-mx23.h index 4d1329d..5fc6b50 100644
> --- a/arch/arm/mach-mxs/devices-mx23.h
> +++ b/arch/arm/mach-mxs/devices-mx23.h
> @@ -35,3 +35,5 @@ struct platform_device *__init mx23_add_mxsfb(
>  		const struct mxsfb_platform_data *pdata);
> 
>  struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
> +
> +#define mx23_add_dma()	mxs_add_mxs_dma()
> diff --git a/arch/arm/mach-mxs/devices-mx28.h
> b/arch/arm/mach-mxs/devices-mx28.h index 9dbeae1..0b3a62d 100644
> --- a/arch/arm/mach-mxs/devices-mx28.h
> +++ b/arch/arm/mach-mxs/devices-mx28.h
> @@ -55,3 +55,5 @@ extern const struct mxs_saif_data mx28_saif_data[]
> __initconst; mxs_add_saif(&mx28_saif_data[id], pdata)
> 
>  struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
> +
> +#define mx28_add_dma()	mxs_add_mxs_dma()
> diff --git a/arch/arm/mach-mxs/devices/platform-dma.c
> b/arch/arm/mach-mxs/devices/platform-dma.c index aff4813..d0126ea 100644
> --- a/arch/arm/mach-mxs/devices/platform-dma.c
> +++ b/arch/arm/mach-mxs/devices/platform-dma.c
> @@ -30,7 +30,7 @@ static struct platform_device *__init mxs_add_dma(const
> char *devid, DMA_BIT_MASK(32));
>  }
> 
> -static int __init mxs_add_mxs_dma(void)
> +int __init mxs_add_mxs_dma(void)
>  {
>  	char *mx23_apbh = "imx23-dma-apbh";
>  	char *mx23_apbx = "imx23-dma-apbx";
> @@ -49,4 +49,3 @@ static int __init mxs_add_mxs_dma(void)
> 
>  	return 0;
>  }
> -arch_initcall(mxs_add_mxs_dma);
> diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h
> b/arch/arm/mach-mxs/include/mach/devices-common.h index f2e3839..544b38d
> 100644
> --- a/arch/arm/mach-mxs/include/mach/devices-common.h
> +++ b/arch/arm/mach-mxs/include/mach/devices-common.h
> @@ -116,3 +116,6 @@ struct mxs_saif_data {
>  struct platform_device *__init mxs_add_saif(
>  		const struct mxs_saif_data *data,
>  		const struct mxs_saif_platform_data *pdata);
> +
> +/* dma */
> +int __init mxs_add_mxs_dma(void);
> diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c
> b/arch/arm/mach-mxs/mach-apx4devkit.c index 48a7fab..92f47e9 100644
> --- a/arch/arm/mach-mxs/mach-apx4devkit.c
> +++ b/arch/arm/mach-mxs/mach-apx4devkit.c
> @@ -210,6 +210,7 @@ static void __init apx4devkit_init(void)
>  	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
>  			ARRAY_SIZE(apx4devkit_pads));
> 
> +	mx28_add_dma();
>  	mx28_add_duart();
>  	mx28_add_auart0();
>  	mx28_add_auart1();
> diff --git a/arch/arm/mach-mxs/mach-m28evk.c
> b/arch/arm/mach-mxs/mach-m28evk.c index 06d7996..9a74ce6 100644
> --- a/arch/arm/mach-mxs/mach-m28evk.c
> +++ b/arch/arm/mach-mxs/mach-m28evk.c
> @@ -321,6 +321,7 @@ static void __init m28evk_init(void)
>  {
>  	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
> 
> +	mx28_add_dma();
>  	mx28_add_duart();
>  	mx28_add_auart0();
>  	mx28_add_auart3();
> diff --git a/arch/arm/mach-mxs/mach-mx23evk.c
> b/arch/arm/mach-mxs/mach-mx23evk.c index 5ea1c57..cabc884 100644
> --- a/arch/arm/mach-mxs/mach-mx23evk.c
> +++ b/arch/arm/mach-mxs/mach-mx23evk.c
> @@ -143,6 +143,7 @@ static void __init mx23evk_init(void)
> 
>  	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
> 
> +	mx23_add_dma();
>  	mx23_add_duart();
>  	mx23_add_auart0();
> 
> diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c
> b/arch/arm/mach-mxs/mach-stmp378x_devb.c index a626c07..a391b9e 100644
> --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
> +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
> @@ -88,6 +88,7 @@ static void __init stmp378x_dvb_init(void)
>  	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
>  			ARRAY_SIZE(stmp378x_dvb_pads));
> 
> +	mx23_add_dma();
>  	mx23_add_duart();
>  	mx23_add_auart0();
>  	mx23_add_rtc_stmp3xxx();
> diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
> index 2c0862e..e17e262 100644
> --- a/arch/arm/mach-mxs/mach-tx28.c
> +++ b/arch/arm/mach-mxs/mach-tx28.c
> @@ -149,6 +149,7 @@ static void __init tx28_stk5v3_init(void)
>  	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
>  			ARRAY_SIZE(tx28_stk5v3_pads));
> 
> +	mx28_add_dma();
>  	mx28_add_duart(); /* UART1 */
>  	mx28_add_auart(1); /* UART2 */

Best regards,
Marek Vasut
Shawn Guo April 23, 2012, 1:59 a.m. UTC | #2 
On Wed, Apr 18, 2012 at 08:46:36PM +0800, Dong Aisheng wrote:
> From: Dong Aisheng <dong.aisheng@linaro.org>
> 
> This will cause conflict when dt is enabled.
> So let each platform add dma devices respectively.
> 
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Huang Shijie <b32955@freescale.com>
> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
> ---
>  arch/arm/mach-mxs/devices-mx23.h                |    2 ++
>  arch/arm/mach-mxs/devices-mx28.h                |    2 ++
>  arch/arm/mach-mxs/devices/platform-dma.c        |    3 +--
>  arch/arm/mach-mxs/include/mach/devices-common.h |    3 +++
>  arch/arm/mach-mxs/mach-apx4devkit.c             |    1 +
>  arch/arm/mach-mxs/mach-m28evk.c                 |    1 +
>  arch/arm/mach-mxs/mach-mx23evk.c                |    1 +
>  arch/arm/mach-mxs/mach-stmp378x_devb.c          |    1 +
>  arch/arm/mach-mxs/mach-tx28.c                   |    1 +
>  9 files changed, 13 insertions(+), 2 deletions(-)
> 
I think instead of asking every board file to add dma device
explicitly, we probably need to do something similar to imx, having
functions imx23_soc_init and imx28_soc_init which will only be called
for non-dt boot, and adding devices like dma, gpio there.

Regards,
Shawn
Dong Aisheng April 23, 2012, 3:26 a.m. UTC | #3 
On Mon, Apr 23, 2012 at 09:59:57AM +0800, Shawn Guo wrote:
> On Wed, Apr 18, 2012 at 08:46:36PM +0800, Dong Aisheng wrote:
> > From: Dong Aisheng <dong.aisheng@linaro.org>
> > 
> > This will cause conflict when dt is enabled.
> > So let each platform add dma devices respectively.
> > 
> > Cc: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > Cc: Marek Vasut <marek.vasut@gmail.com>
> > Cc: Huang Shijie <b32955@freescale.com>
> > Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
> > ---
> >  arch/arm/mach-mxs/devices-mx23.h                |    2 ++
> >  arch/arm/mach-mxs/devices-mx28.h                |    2 ++
> >  arch/arm/mach-mxs/devices/platform-dma.c        |    3 +--
> >  arch/arm/mach-mxs/include/mach/devices-common.h |    3 +++
> >  arch/arm/mach-mxs/mach-apx4devkit.c             |    1 +
> >  arch/arm/mach-mxs/mach-m28evk.c                 |    1 +
> >  arch/arm/mach-mxs/mach-mx23evk.c                |    1 +
> >  arch/arm/mach-mxs/mach-stmp378x_devb.c          |    1 +
> >  arch/arm/mach-mxs/mach-tx28.c                   |    1 +
> >  9 files changed, 13 insertions(+), 2 deletions(-)
> > 
> I think instead of asking every board file to add dma device
> explicitly, we probably need to do something similar to imx, having
> functions imx23_soc_init and imx28_soc_init which will only be called
> for non-dt boot, and adding devices like dma, gpio there.
> 
Yes, it's fine to me since gpio has the same issue.
Will revise the patch.

Regards
Dong Aisheng
diff mbox

Patch

diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 4d1329d..5fc6b50 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -35,3 +35,5 @@  struct platform_device *__init mx23_add_mxsfb(
 		const struct mxsfb_platform_data *pdata);
 
 struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
+
+#define mx23_add_dma()	mxs_add_mxs_dma()
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 9dbeae1..0b3a62d 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -55,3 +55,5 @@  extern const struct mxs_saif_data mx28_saif_data[] __initconst;
 	mxs_add_saif(&mx28_saif_data[id], pdata)
 
 struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
+
+#define mx28_add_dma()	mxs_add_mxs_dma()
diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c
index aff4813..d0126ea 100644
--- a/arch/arm/mach-mxs/devices/platform-dma.c
+++ b/arch/arm/mach-mxs/devices/platform-dma.c
@@ -30,7 +30,7 @@  static struct platform_device *__init mxs_add_dma(const char *devid,
 				DMA_BIT_MASK(32));
 }
 
-static int __init mxs_add_mxs_dma(void)
+int __init mxs_add_mxs_dma(void)
 {
 	char *mx23_apbh = "imx23-dma-apbh";
 	char *mx23_apbx = "imx23-dma-apbx";
@@ -49,4 +49,3 @@  static int __init mxs_add_mxs_dma(void)
 
 	return 0;
 }
-arch_initcall(mxs_add_mxs_dma);
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index f2e3839..544b38d 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -116,3 +116,6 @@  struct mxs_saif_data {
 struct platform_device *__init mxs_add_saif(
 		const struct mxs_saif_data *data,
 		const struct mxs_saif_platform_data *pdata);
+
+/* dma */
+int __init mxs_add_mxs_dma(void);
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 48a7fab..92f47e9 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -210,6 +210,7 @@  static void __init apx4devkit_init(void)
 	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
 			ARRAY_SIZE(apx4devkit_pads));
 
+	mx28_add_dma();
 	mx28_add_duart();
 	mx28_add_auart0();
 	mx28_add_auart1();
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 06d7996..9a74ce6 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -321,6 +321,7 @@  static void __init m28evk_init(void)
 {
 	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
 
+	mx28_add_dma();
 	mx28_add_duart();
 	mx28_add_auart0();
 	mx28_add_auart3();
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 5ea1c57..cabc884 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -143,6 +143,7 @@  static void __init mx23evk_init(void)
 
 	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
 
+	mx23_add_dma();
 	mx23_add_duart();
 	mx23_add_auart0();
 
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index a626c07..a391b9e 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -88,6 +88,7 @@  static void __init stmp378x_dvb_init(void)
 	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
 			ARRAY_SIZE(stmp378x_dvb_pads));
 
+	mx23_add_dma();
 	mx23_add_duart();
 	mx23_add_auart0();
 	mx23_add_rtc_stmp3xxx();
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 2c0862e..e17e262 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -149,6 +149,7 @@  static void __init tx28_stk5v3_init(void)
 	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
 			ARRAY_SIZE(tx28_stk5v3_pads));
 
+	mx28_add_dma();
 	mx28_add_duart(); /* UART1 */
 	mx28_add_auart(1); /* UART2 */