diff mbox

[git,patches] libata updates for 3.3

Message ID 20120109003255.GA6598@havoc.gtf.org
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Jeff Garzik Jan. 9, 2012, 12:32 a.m. UTC
Summary (very little excitement at all this time):

0) Will play around with git signed tags with the next update.

1) PM improvements, including runtime suspend/resume work

2) AHCI DMA engine start/stop changes, intended to improve spec
compliance, thereby making a particular IP block work.  Tested for a
while in linux-next, but nonetheless worth watching for breakage in the
field.

3) other minor bits.

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Please pull 318893e1429a9d50569a0379d1e20b0ecc45c555 from
git://github.com/jgarzik/libata-dev.git upstream-linus

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
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=z+FO
-----END PGP SIGNATURE-----

to receive the following updates:

 drivers/ata/Kconfig            |    2 +-
 drivers/ata/ahci.c             |   26 +++++-
 drivers/ata/ahci_platform.c    |   68 ++++++++++++++
 drivers/ata/libahci.c          |    5 +-
 drivers/ata/libata-core.c      |  188 ++++++++++++++++++++++++++--------------
 drivers/ata/libata-scsi.c      |    3 +-
 drivers/ata/libata-sff.c       |    4 +-
 drivers/ata/libata-transport.c |    5 +
 drivers/ata/libata.h           |    1 +
 drivers/ata/pata_arasan_cf.c   |   12 +---
 drivers/ata/pata_at91.c        |   15 +---
 drivers/ata/pata_bf54x.c       |   20 +----
 drivers/ata/pata_cs5536.c      |   99 +++++++++------------
 drivers/ata/pata_imx.c         |   12 +---
 drivers/ata/pata_ixp4xx_cf.c   |   13 +---
 drivers/ata/pata_mpc52xx.c     |   21 +----
 drivers/ata/pata_of_platform.c |   27 ++----
 drivers/ata/pata_palmld.c      |   13 +---
 drivers/ata/pata_platform.c    |   12 +---
 drivers/ata/pata_pxa.c         |   13 +---
 drivers/ata/pata_rb532_cf.c    |   21 +----
 drivers/ata/sata_dwc_460ex.c   |   13 +---
 drivers/ata/sata_fsl.c         |   14 +---
 drivers/scsi/scsi_error.c      |    5 +-
 drivers/scsi/scsi_pm.c         |   27 ++++++-
 drivers/scsi/sd.c              |    5 +
 include/linux/ahci_platform.h  |    2 +
 include/scsi/scsi_host.h       |    3 +
 28 files changed, 326 insertions(+), 323 deletions(-)

Alessandro Rubini (1):
      ahci: support the STA2X11 I/O Hub

Axel Lin (1):
      SATA/PATA: convert drivers/ata/* to use module_platform_driver()

Bartlomiej Zolnierkiewicz (1):
      pata_cs5536: forward port changes from cs5536

Brian Norris (1):
      ahci: platform support for suspend/resume

Lin Ming (9):
      ata: make ata port as parent device of scsi host
      [SCSI] add flag to skip the runtime PM calls on the host
      [SCSI] check runtime PM status in system PM
      [SCSI] sd: check runtime PM status in sd_shutdown
      ata: add ata port system PM callbacks
      ata: add ata port runtime PM callbacks
      [SCSI] runtime resume parent for child's system-resume
      ata: update ata port's runtime status during system resume
      ata: add ata port hibernate callbacks

Rob Herring (1):
      pata_of_platform: remove direct dependency on OF_IRQ

Sergei Shtylyov (3):
      libata-sff: use ATAPI_{COD|IO}
      libata-core: kill duplicate statement in ata_do_set_mode()
      pata_bf54x: fix BMIDE status register emulation

Tejun Heo (1):
      ahci: start engine only during soft/hard resets

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Linus Torvalds Jan. 14, 2012, 5:21 a.m. UTC | #1
On Sun, Jan 8, 2012 at 4:32 PM, Jeff Garzik <jeff@garzik.org> wrote:
>
> Summary (very little excitement at all this time):
>
> 0) Will play around with git signed tags with the next update.
>
> 1) PM improvements, including runtime suspend/resume work

Hmm. I don't know if this comes from the PM improvements or even this
particular pull, but links that aren't connected are *really* slow.

Annoyingly so.

My Macbook Air that I finally can resume reliably again used to come
back almost immediately from resume. No longer. And the reason seems
to be this:

 [  243.306149] ata_piix 0000:00:1f.2: setting latency timer to 64
 [  243.306180] bcma: Found rev 6 PMU (capabilities 0x108C2606)
 [  246.579648] ata1.01: failed to resume link (SControl 0)
 [  246.735472] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 [  246.735485] ata1.01: SATA link down (SStatus 0 SControl 0)
 [  246.743632] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES)
filtered out
 [  246.744353] ata1.00: configured for UDMA/100
 [  246.744537] sd 0:0:0:0: [sda] Starting disk
 [  247.769806] ata2.00: failed to resume link (SControl 0)
 [  248.796207] ata2.01: failed to resume link (SControl 0)
 [  248.807665] ata2.00: SATA link down (SStatus 4 SControl 0)
 [  248.807681] ata2.01: SATA link down (SStatus 0 SControl 0)
 [  248.808338] PM: resume of devices complete after 5511.027 msecs
 [  248.882074] PM: Finishing wakeup.

Notice the basically five-second timeout all basically for "failed to
resume link: for things that didn't have anything connected to them
anyway.

This is a bog-standard Intel controller, there's nothing odd there.

I'm pretty sure this used to be much faster, but I haven't bisected
any of it (and with all the problems I had with resume both due to
wireless and MCE, I really wouldn't want to even try).

Taking 5.5 seconds to come back from suspend-to-ram really is too
long. Not *all* of it is the SATA part, but a lot of it is.

For ATA suspend/resume, could we perhaps only resume the ports that
*used* to have something on them? And then, if somebody has plugged
something into the others, not consider that a resume thing at all,
but a hotplug thing that happens *after* the resume?

If it takes five seconds to notice new hardware after a resume, nobody
cares. But the disk we had before obviously needs to get resumed.. But
it does seem like it's the "no link" part that takes long.

Hmm? Or any other ideas?

         Linus
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jeff Garzik Jan. 15, 2012, 2:41 p.m. UTC | #2
On 01/14/2012 12:21 AM, Linus Torvalds wrote:
> On Sun, Jan 8, 2012 at 4:32 PM, Jeff Garzik<jeff@garzik.org>  wrote:
>>
>> Summary (very little excitement at all this time):
>>
>> 0) Will play around with git signed tags with the next update.
>>
>> 1) PM improvements, including runtime suspend/resume work
>
> Hmm. I don't know if this comes from the PM improvements or even this
> particular pull, but links that aren't connected are *really* slow.
>
> Annoyingly so.
>
> My Macbook Air that I finally can resume reliably again used to come
> back almost immediately from resume. No longer. And the reason seems
> to be this:
>
>   [  243.306149] ata_piix 0000:00:1f.2: setting latency timer to 64
>   [  243.306180] bcma: Found rev 6 PMU (capabilities 0x108C2606)
>   [  246.579648] ata1.01: failed to resume link (SControl 0)
>   [  246.735472] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>   [  246.735485] ata1.01: SATA link down (SStatus 0 SControl 0)
>   [  246.743632] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES)
> filtered out
>   [  246.744353] ata1.00: configured for UDMA/100
>   [  246.744537] sd 0:0:0:0: [sda] Starting disk
>   [  247.769806] ata2.00: failed to resume link (SControl 0)
>   [  248.796207] ata2.01: failed to resume link (SControl 0)
>   [  248.807665] ata2.00: SATA link down (SStatus 4 SControl 0)
>   [  248.807681] ata2.01: SATA link down (SStatus 0 SControl 0)
>   [  248.808338] PM: resume of devices complete after 5511.027 msecs
>   [  248.882074] PM: Finishing wakeup.
>
> Notice the basically five-second timeout all basically for "failed to
> resume link: for things that didn't have anything connected to them
> anyway.
>
> This is a bog-standard Intel controller, there's nothing odd there.
>
> I'm pretty sure this used to be much faster, but I haven't bisected
> any of it (and with all the problems I had with resume both due to
> wireless and MCE, I really wouldn't want to even try).
>
> Taking 5.5 seconds to come back from suspend-to-ram really is too
> long. Not *all* of it is the SATA part, but a lot of it is.
>
> For ATA suspend/resume, could we perhaps only resume the ports that
> *used* to have something on them? And then, if somebody has plugged
> something into the others, not consider that a resume thing at all,
> but a hotplug thing that happens *after* the resume?
>
> If it takes five seconds to notice new hardware after a resume, nobody
> cares. But the disk we had before obviously needs to get resumed.. But
> it does seem like it's the "no link" part that takes long.

We definitely notice new hardware after a resume, but you're right -- it 
should not take that long to work through ports that are empty.

Will take a look tomorrow (kid->doctor+relatives today, uff) at the most 
recent PM push; my quick testing did not show any problems, but 
suspend/resume varies widely across hardware platforms.  I think I might 
even have a MacBook I can test.  Apple platforms test to be weird too...  ;)

	Jeff





--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Lin Ming Jan. 16, 2012, 1:15 a.m. UTC | #3
On Sun, 2012-01-15 at 09:41 -0500, Jeff Garzik wrote:
> On 01/14/2012 12:21 AM, Linus Torvalds wrote:
> > On Sun, Jan 8, 2012 at 4:32 PM, Jeff Garzik<jeff@garzik.org>  wrote:
> >>
> >> Summary (very little excitement at all this time):
> >>
> >> 0) Will play around with git signed tags with the next update.
> >>
> >> 1) PM improvements, including runtime suspend/resume work
> >
> > Hmm. I don't know if this comes from the PM improvements or even this
> > particular pull, but links that aren't connected are *really* slow.
> >
> > Annoyingly so.
> >
> > My Macbook Air that I finally can resume reliably again used to come
> > back almost immediately from resume. No longer. And the reason seems
> > to be this:
> >
> >   [  243.306149] ata_piix 0000:00:1f.2: setting latency timer to 64
> >   [  243.306180] bcma: Found rev 6 PMU (capabilities 0x108C2606)
> >   [  246.579648] ata1.01: failed to resume link (SControl 0)
> >   [  246.735472] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >   [  246.735485] ata1.01: SATA link down (SStatus 0 SControl 0)
> >   [  246.743632] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES)
> > filtered out
> >   [  246.744353] ata1.00: configured for UDMA/100
> >   [  246.744537] sd 0:0:0:0: [sda] Starting disk
> >   [  247.769806] ata2.00: failed to resume link (SControl 0)
> >   [  248.796207] ata2.01: failed to resume link (SControl 0)
> >   [  248.807665] ata2.00: SATA link down (SStatus 4 SControl 0)
> >   [  248.807681] ata2.01: SATA link down (SStatus 0 SControl 0)
> >   [  248.808338] PM: resume of devices complete after 5511.027 msecs
> >   [  248.882074] PM: Finishing wakeup.
> >
> > Notice the basically five-second timeout all basically for "failed to
> > resume link: for things that didn't have anything connected to them
> > anyway.
> >
> > This is a bog-standard Intel controller, there's nothing odd there.
> >
> > I'm pretty sure this used to be much faster, but I haven't bisected
> > any of it (and with all the problems I had with resume both due to
> > wireless and MCE, I really wouldn't want to even try).
> >
> > Taking 5.5 seconds to come back from suspend-to-ram really is too
> > long. Not *all* of it is the SATA part, but a lot of it is.
> >
> > For ATA suspend/resume, could we perhaps only resume the ports that
> > *used* to have something on them? And then, if somebody has plugged
> > something into the others, not consider that a resume thing at all,
> > but a hotplug thing that happens *after* the resume?
> >
> > If it takes five seconds to notice new hardware after a resume, nobody
> > cares. But the disk we had before obviously needs to get resumed.. But
> > it does seem like it's the "no link" part that takes long.
> 
> We definitely notice new hardware after a resume, but you're right -- it 
> should not take that long to work through ports that are empty.
> 
> Will take a look tomorrow (kid->doctor+relatives today, uff) at the most 
> recent PM push; my quick testing did not show any problems, but 
> suspend/resume varies widely across hardware platforms.  I think I might 
> even have a MacBook I can test.  Apple platforms test to be weird too...  ;)

I just did a quick test with latest git head(122804e) and didn't find
the problem either.

I'll test other machines.

Lin Ming

> 
> 	Jeff
> 
> 
> 
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index cf047c4..6bdedd7 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -820,7 +820,7 @@  config PATA_PLATFORM
 
 config PATA_OF_PLATFORM
 	tristate "OpenFirmware platform device PATA support"
-	depends on PATA_PLATFORM && OF && OF_IRQ
+	depends on PATA_PLATFORM && OF
 	help
 	  This option enables support for generic directly connected ATA
 	  devices commonly found on embedded systems with OpenFirmware
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index cf26222..d07bf03 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -52,7 +52,8 @@ 
 #define DRV_VERSION	"3.0"
 
 enum {
-	AHCI_PCI_BAR		= 5,
+	AHCI_PCI_BAR_STA2X11	= 0,
+	AHCI_PCI_BAR_STANDARD	= 5,
 };
 
 enum board_ids {
@@ -375,6 +376,9 @@  static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(SI, 0x1185), board_ahci },		/* SiS 968 */
 	{ PCI_VDEVICE(SI, 0x0186), board_ahci },		/* SiS 968 */
 
+	/* ST Microelectronics */
+	{ PCI_VDEVICE(STMICRO, 0xCC06), board_ahci },		/* ST ConneXt */
+
 	/* Marvell */
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
 	{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },	/* 6121 */
@@ -622,6 +626,13 @@  static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 {
 	int rc;
 
+	/*
+	 * If the device fixup already set the dma_mask to some non-standard
+	 * value, don't extend it here. This happens on STA2X11, for example.
+	 */
+	if (pdev->dma_mask && pdev->dma_mask < DMA_BIT_MASK(32))
+		return 0;
+
 	if (using_dac &&
 	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
@@ -1026,6 +1037,7 @@  static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;
 	int n_ports, i, rc;
+	int ahci_pci_bar = AHCI_PCI_BAR_STANDARD;
 
 	VPRINTK("ENTER\n");
 
@@ -1057,6 +1069,10 @@  static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_info(&pdev->dev,
 			 "PDC42819 can only drive SATA devices with this driver\n");
 
+	/* The Connext uses non-standard BAR */
+	if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
+		ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
+
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
@@ -1065,7 +1081,7 @@  static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* AHCI controllers often implement SFF compatible interface.
 	 * Grab all PCI BARs just in case.
 	 */
-	rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
+	rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
 	if (rc == -EBUSY)
 		pcim_pin_device(pdev);
 	if (rc)
@@ -1108,7 +1124,7 @@  static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
 
-	hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+	hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar];
 
 	/* save initial config */
 	ahci_pci_save_initial_config(pdev, hpriv);
@@ -1172,8 +1188,8 @@  static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
-		ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
-		ata_port_pbar_desc(ap, AHCI_PCI_BAR,
+		ata_port_pbar_desc(ap, ahci_pci_bar, -1, "abar");
+		ata_port_pbar_desc(ap, ahci_pci_bar,
 				   0x100 + ap->port_no * 0x80, "port");
 
 		/* set enclosure management message type */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 43b8758..48be4e1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -202,6 +202,71 @@  static int __devexit ahci_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int ahci_suspend(struct device *dev)
+{
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 ctl;
+	int rc;
+
+	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+		dev_err(dev, "firmware update required for suspend/resume\n");
+		return -EIO;
+	}
+
+	/*
+	 * AHCI spec rev1.1 section 8.3.3:
+	 * Software must disable interrupts prior to requesting a
+	 * transition of the HBA to D3 state.
+	 */
+	ctl = readl(mmio + HOST_CTL);
+	ctl &= ~HOST_IRQ_EN;
+	writel(ctl, mmio + HOST_CTL);
+	readl(mmio + HOST_CTL); /* flush */
+
+	rc = ata_host_suspend(host, PMSG_SUSPEND);
+	if (rc)
+		return rc;
+
+	if (pdata && pdata->suspend)
+		return pdata->suspend(dev);
+	return 0;
+}
+
+static int ahci_resume(struct device *dev)
+{
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
+	struct ata_host *host = dev_get_drvdata(dev);
+	int rc;
+
+	if (pdata && pdata->resume) {
+		rc = pdata->resume(dev);
+		if (rc)
+			return rc;
+	}
+
+	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+		rc = ahci_reset_controller(host);
+		if (rc)
+			return rc;
+
+		ahci_init_controller(host);
+	}
+
+	ata_host_resume(host);
+
+	return 0;
+}
+
+static struct dev_pm_ops ahci_pm_ops = {
+	.suspend		= &ahci_suspend,
+	.resume			= &ahci_resume,
+};
+#endif
+
 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "calxeda,hb-ahci", },
 	{},
@@ -214,6 +279,9 @@  static struct platform_driver ahci_driver = {
 		.name = "ahci",
 		.owner = THIS_MODULE,
 		.of_match_table = ahci_of_match,
+#ifdef CONFIG_PM
+		.pm = &ahci_pm_ops,
+#endif
 	},
 	.id_table	= ahci_devtype,
 };
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 3c92dbd..a72bfd0 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -746,9 +746,6 @@  static void ahci_start_port(struct ata_port *ap)
 	/* enable FIS reception */
 	ahci_start_fis_rx(ap);
 
-	/* enable DMA */
-	ahci_start_engine(ap);
-
 	/* turn on LEDs */
 	if (ap->flags & ATA_FLAG_EM) {
 		ata_for_each_link(link, ap, EDGE) {
@@ -2022,7 +2019,7 @@  static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 		ahci_power_down(ap);
 	else {
 		ata_port_err(ap, "%s (%d)\n", emsg, rc);
-		ahci_start_port(ap);
+		ata_port_freeze(ap);
 	}
 
 	return rc;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c04ad68..11c9aea 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -66,6 +66,7 @@ 
 #include <asm/byteorder.h>
 #include <linux/cdrom.h>
 #include <linux/ratelimit.h>
+#include <linux/pm_runtime.h>
 
 #include "libata.h"
 #include "libata-transport.h"
@@ -3248,10 +3249,10 @@  int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		ata_force_xfermask(dev);
 
 		pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
-		dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
 
 		if (libata_dma_mask & mode_mask)
-			dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
+			dma_mask = ata_pack_xfermask(0, dev->mwdma_mask,
+						     dev->udma_mask);
 		else
 			dma_mask = 0;
 
@@ -5234,73 +5235,55 @@  bool ata_link_offline(struct ata_link *link)
 }
 
 #ifdef CONFIG_PM
-static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
+static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 			       unsigned int action, unsigned int ehi_flags,
 			       int wait)
 {
+	struct ata_link *link;
 	unsigned long flags;
-	int i, rc;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-		struct ata_link *link;
+	int rc;
 
-		/* Previous resume operation might still be in
-		 * progress.  Wait for PM_PENDING to clear.
-		 */
-		if (ap->pflags & ATA_PFLAG_PM_PENDING) {
-			ata_port_wait_eh(ap);
-			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
-		}
+	/* Previous resume operation might still be in
+	 * progress.  Wait for PM_PENDING to clear.
+	 */
+	if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+		ata_port_wait_eh(ap);
+		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+	}
 
-		/* request PM ops to EH */
-		spin_lock_irqsave(ap->lock, flags);
+	/* request PM ops to EH */
+	spin_lock_irqsave(ap->lock, flags);
 
-		ap->pm_mesg = mesg;
-		if (wait) {
-			rc = 0;
-			ap->pm_result = &rc;
-		}
+	ap->pm_mesg = mesg;
+	if (wait) {
+		rc = 0;
+		ap->pm_result = &rc;
+	}
 
-		ap->pflags |= ATA_PFLAG_PM_PENDING;
-		ata_for_each_link(link, ap, HOST_FIRST) {
-			link->eh_info.action |= action;
-			link->eh_info.flags |= ehi_flags;
-		}
+	ap->pflags |= ATA_PFLAG_PM_PENDING;
+	ata_for_each_link(link, ap, HOST_FIRST) {
+		link->eh_info.action |= action;
+		link->eh_info.flags |= ehi_flags;
+	}
 
-		ata_port_schedule_eh(ap);
+	ata_port_schedule_eh(ap);
 
-		spin_unlock_irqrestore(ap->lock, flags);
+	spin_unlock_irqrestore(ap->lock, flags);
 
-		/* wait and check result */
-		if (wait) {
-			ata_port_wait_eh(ap);
-			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
-			if (rc)
-				return rc;
-		}
+	/* wait and check result */
+	if (wait) {
+		ata_port_wait_eh(ap);
+		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
 	}
 
-	return 0;
+	return rc;
 }
 
-/**
- *	ata_host_suspend - suspend host
- *	@host: host to suspend
- *	@mesg: PM message
- *
- *	Suspend @host.  Actual operation is performed by EH.  This
- *	function requests EH to perform PM operations and waits for EH
- *	to finish.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
- */
-int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
+#define to_ata_port(d) container_of(d, struct ata_port, tdev)
+
+static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
 {
+	struct ata_port *ap = to_ata_port(dev);
 	unsigned int ehi_flags = ATA_EHI_QUIET;
 	int rc;
 
@@ -5315,31 +5298,108 @@  int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 	if (mesg.event == PM_EVENT_SUSPEND)
 		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
 
-	rc = ata_host_request_pm(host, mesg, 0, ehi_flags, 1);
-	if (rc == 0)
-		host->dev->power.power_state = mesg;
+	rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, 1);
 	return rc;
 }
 
+static int ata_port_suspend(struct device *dev)
+{
+	if (pm_runtime_suspended(dev))
+		return 0;
+
+	return ata_port_suspend_common(dev, PMSG_SUSPEND);
+}
+
+static int ata_port_do_freeze(struct device *dev)
+{
+	if (pm_runtime_suspended(dev))
+		pm_runtime_resume(dev);
+
+	return ata_port_suspend_common(dev, PMSG_FREEZE);
+}
+
+static int ata_port_poweroff(struct device *dev)
+{
+	if (pm_runtime_suspended(dev))
+		return 0;
+
+	return ata_port_suspend_common(dev, PMSG_HIBERNATE);
+}
+
+static int ata_port_resume_common(struct device *dev)
+{
+	struct ata_port *ap = to_ata_port(dev);
+	int rc;
+
+	rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET,
+		ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 1);
+	return rc;
+}
+
+static int ata_port_resume(struct device *dev)
+{
+	int rc;
+
+	rc = ata_port_resume_common(dev);
+	if (!rc) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return rc;
+}
+
+static int ata_port_runtime_idle(struct device *dev)
+{
+	return pm_runtime_suspend(dev);
+}
+
+static const struct dev_pm_ops ata_port_pm_ops = {
+	.suspend = ata_port_suspend,
+	.resume = ata_port_resume,
+	.freeze = ata_port_do_freeze,
+	.thaw = ata_port_resume,
+	.poweroff = ata_port_poweroff,
+	.restore = ata_port_resume,
+
+	.runtime_suspend = ata_port_suspend,
+	.runtime_resume = ata_port_resume_common,
+	.runtime_idle = ata_port_runtime_idle,
+};
+
+/**
+ *	ata_host_suspend - suspend host
+ *	@host: host to suspend
+ *	@mesg: PM message
+ *
+ *	Suspend @host.  Actual operation is performed by port suspend.
+ */
+int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
+{
+	host->dev->power.power_state = mesg;
+	return 0;
+}
+
 /**
  *	ata_host_resume - resume host
  *	@host: host to resume
  *
- *	Resume @host.  Actual operation is performed by EH.  This
- *	function requests EH to perform PM operations and returns.
- *	Note that all resume operations are performed parallelly.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
+ *	Resume @host.  Actual operation is performed by port resume.
  */
 void ata_host_resume(struct ata_host *host)
 {
-	ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
-			    ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
 	host->dev->power.power_state = PMSG_ON;
 }
 #endif
 
+struct device_type ata_port_type = {
+	.name = "ata_port",
+#ifdef CONFIG_PM
+	.pm = &ata_port_pm_ops,
+#endif
+};
+
 /**
  *	ata_dev_init - Initialize an ata_device structure
  *	@dev: Device structure to initialize
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2a5412e..508a60b 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3381,6 +3381,7 @@  int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 		if (!shost)
 			goto err_alloc;
 
+		shost->eh_noresume = 1;
 		*(struct ata_port **)&shost->hostdata[0] = ap;
 		ap->scsi_host = shost;
 
@@ -3398,7 +3399,7 @@  int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 		 */
 		shost->max_host_blocked = 1;
 
-		rc = scsi_add_host(ap->scsi_host, ap->host->dev);
+		rc = scsi_add_host(ap->scsi_host, &ap->tdev);
 		if (rc)
 			goto err_add;
 	}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 4cadfa2..9691dd0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -929,11 +929,11 @@  static void atapi_pio_bytes(struct ata_queued_cmd *qc)
 	bytes = (bc_hi << 8) | bc_lo;
 
 	/* shall be cleared to zero, indicating xfer of data */
-	if (unlikely(ireason & (1 << 0)))
+	if (unlikely(ireason & ATAPI_COD))
 		goto atapi_check;
 
 	/* make sure transfer direction matches expected */
-	i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
+	i_write = ((ireason & ATAPI_IO) == 0) ? 1 : 0;
 	if (unlikely(do_write != i_write))
 		goto atapi_check;
 
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index ce9dc62..9a7f0ea 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -32,6 +32,7 @@ 
 #include <linux/libata.h>
 #include <linux/hdreg.h>
 #include <linux/uaccess.h>
+#include <linux/pm_runtime.h>
 
 #include "libata.h"
 #include "libata-transport.h"
@@ -279,6 +280,7 @@  int ata_tport_add(struct device *parent,
 	struct device *dev = &ap->tdev;
 
 	device_initialize(dev);
+	dev->type = &ata_port_type;
 
 	dev->parent = get_device(parent);
 	dev->release = ata_tport_release;
@@ -289,6 +291,9 @@  int ata_tport_add(struct device *parent,
 		goto tport_err;
 	}
 
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	transport_add_device(dev);
 	transport_configure_device(dev);
 
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 773de97..814486d 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -58,6 +58,7 @@  extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
 extern int libata_allow_tpm;
+extern struct device_type ata_port_type;
 extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
 extern void ata_force_cbl(struct ata_port *ap);
 extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index e8574bb..048589f 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -963,17 +963,7 @@  static struct platform_driver arasan_cf_driver = {
 	},
 };
 
-static int __init arasan_cf_init(void)
-{
-	return platform_driver_register(&arasan_cf_driver);
-}
-module_init(arasan_cf_init);
-
-static void __exit arasan_cf_exit(void)
-{
-	platform_driver_unregister(&arasan_cf_driver);
-}
-module_exit(arasan_cf_exit);
+module_platform_driver(arasan_cf_driver);
 
 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
 MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index a76f24a..d56dd45 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -454,20 +454,7 @@  static struct platform_driver pata_at91_driver = {
 	},
 };
 
-static int __init pata_at91_init(void)
-{
-	return platform_driver_register(&pata_at91_driver);
-}
-
-static void __exit pata_at91_exit(void)
-{
-	platform_driver_unregister(&pata_at91_driver);
-}
-
-
-module_init(pata_at91_init);
-module_exit(pata_at91_exit);
-
+module_platform_driver(pata_at91_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index bd987bb..d6a4677 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -418,14 +418,6 @@  static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 					(tcyc_tdvs<<8 | tdvs));
 				ATAPI_SET_ULTRA_TIM_2(base, (tmli<<8 | tss));
 				ATAPI_SET_ULTRA_TIM_3(base, (trp<<8 | tzah));
-
-				/* Enable host ATAPI Untra DMA interrupts */
-				ATAPI_SET_INT_MASK(base,
-					ATAPI_GET_INT_MASK(base)
-					| UDMAIN_DONE_MASK
-					| UDMAOUT_DONE_MASK
-					| UDMAIN_TERM_MASK
-					| UDMAOUT_TERM_MASK);
 			}
 		}
 	}
@@ -470,10 +462,6 @@  static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 			ATAPI_SET_MULTI_TIM_0(base, (tm<<8 | td));
 			ATAPI_SET_MULTI_TIM_1(base, (tkr<<8 | tkw));
 			ATAPI_SET_MULTI_TIM_2(base, (teoc<<8 | th));
-
-			/* Enable host ATAPI Multi DMA interrupts */
-			ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base)
-				| MULTI_DONE_MASK | MULTI_TERM_MASK);
 			SSYNC();
 		}
 	}
@@ -1153,15 +1141,11 @@  static unsigned char bfin_bmdma_status(struct ata_port *ap)
 {
 	unsigned char host_stat = 0;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-	unsigned short int_status = ATAPI_GET_INT_STATUS(base);
 
-	if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON))
+	if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON | ULTRA_XFER_ON))
 		host_stat |= ATA_DMA_ACTIVE;
-	if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT|
-		ATAPI_DEV_INT))
+	if (ATAPI_GET_INT_STATUS(base) & ATAPI_DEV_INT)
 		host_stat |= ATA_DMA_INTR;
-	if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT))
-		host_stat |= ATA_DMA_ERR|ATA_DMA_INTR;
 
 	dev_dbg(ap->dev, "ATAPI: host_stat=0x%x\n", host_stat);
 
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 628c8fa..7a402c7 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -1,6 +1,7 @@ 
 /*
  * pata_cs5536.c	- CS5536 PATA for new ATA layer
  *			  (C) 2007 Martin K. Petersen <mkp@mkp.net>
+ *			  (C) 2011 Bartlomiej Zolnierkiewicz
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -55,24 +56,16 @@  MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
 #define DRV_VERSION	"0.0.8"
 
 enum {
-	CFG			= 0,
-	DTC			= 1,
-	CAST			= 2,
-	ETC			= 3,
-
-	MSR_IDE_BASE		= 0x51300000,
-	MSR_IDE_CFG		= (MSR_IDE_BASE + 0x10),
-	MSR_IDE_DTC		= (MSR_IDE_BASE + 0x12),
-	MSR_IDE_CAST		= (MSR_IDE_BASE + 0x13),
-	MSR_IDE_ETC		= (MSR_IDE_BASE + 0x14),
-
+	MSR_IDE_CFG		= 0x51300010,
 	PCI_IDE_CFG		= 0x40,
-	PCI_IDE_DTC		= 0x48,
-	PCI_IDE_CAST		= 0x4c,
-	PCI_IDE_ETC		= 0x50,
 
-	IDE_CFG_CHANEN		= 0x2,
-	IDE_CFG_CABLE		= 0x10000,
+	CFG			= 0,
+	DTC			= 2,
+	CAST			= 3,
+	ETC			= 4,
+
+	IDE_CFG_CHANEN		= (1 << 1),
+	IDE_CFG_CABLE		= (1 << 17) | (1 << 16),
 
 	IDE_D0_SHIFT		= 24,
 	IDE_D1_SHIFT		= 16,
@@ -84,45 +77,50 @@  enum {
 	IDE_CAST_CMD_MASK	= 0xff,
 	IDE_CAST_CMD_SHIFT	= 24,
 
-	IDE_ETC_NODMA		= 0x03,
-};
-
-static const u32 msr_reg[4] = {
-	MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
-};
-
-static const u8 pci_reg[4] = {
-	PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC,
+	IDE_ETC_UDMA_MASK	= 0xc0,
 };
 
-static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
 {
 	if (unlikely(use_msr)) {
 		u32 dummy __maybe_unused;
 
-		rdmsr(msr_reg[reg], *val, dummy);
+		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
 		return 0;
 	}
 
-	return pci_read_config_dword(pdev, pci_reg[reg], val);
+	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
 }
 
-static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
+static int cs5536_write(struct pci_dev *pdev, int reg, int val)
 {
 	if (unlikely(use_msr)) {
-		wrmsr(msr_reg[reg], val, 0);
+		wrmsr(MSR_IDE_CFG + reg, val, 0);
 		return 0;
 	}
 
-	return pci_write_config_dword(pdev, pci_reg[reg], val);
+	return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static void cs5536_program_dtc(struct ata_device *adev, u8 tim)
+{
+	struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev);
+	int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	u32 dtc;
+
+	cs5536_read(pdev, DTC, &dtc);
+	dtc &= ~(IDE_DRV_MASK << dshift);
+	dtc |= tim << dshift;
+	cs5536_write(pdev, DTC, dtc);
 }
 
 /**
  *	cs5536_cable_detect	-	detect cable type
  *	@ap: Port to detect on
  *
- *	Perform cable detection for ATA66 capable cable. Return a libata
- *	cable type.
+ *	Perform cable detection for ATA66 capable cable.
+ *
+ *	Returns a cable type.
  */
 
 static int cs5536_cable_detect(struct ata_port *ap)
@@ -132,7 +130,7 @@  static int cs5536_cable_detect(struct ata_port *ap)
 
 	cs5536_read(pdev, CFG, &cfg);
 
-	if (cfg & (IDE_CFG_CABLE << ap->port_no))
+	if (cfg & IDE_CFG_CABLE)
 		return ATA_CBL_PATA80;
 	else
 		return ATA_CBL_PATA40;
@@ -162,19 +160,15 @@  static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	struct ata_device *pair = ata_dev_pair(adev);
 	int mode = adev->pio_mode - XFER_PIO_0;
 	int cmdmode = mode;
-	int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
 	int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
-	u32 dtc, cast, etc;
+	u32 cast;
 
 	if (pair)
 		cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
 
-	cs5536_read(pdev, DTC, &dtc);
-	cs5536_read(pdev, CAST, &cast);
-	cs5536_read(pdev, ETC, &etc);
+	cs5536_program_dtc(adev, drv_timings[mode]);
 
-	dtc &= ~(IDE_DRV_MASK << dshift);
-	dtc |= drv_timings[mode] << dshift;
+	cs5536_read(pdev, CAST, &cast);
 
 	cast &= ~(IDE_CAST_DRV_MASK << cshift);
 	cast |= addr_timings[mode] << cshift;
@@ -182,12 +176,7 @@  static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
 	cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
 
-	etc &= ~(IDE_DRV_MASK << dshift);
-	etc |= IDE_ETC_NODMA << dshift;
-
-	cs5536_write(pdev, DTC, dtc);
 	cs5536_write(pdev, CAST, cast);
-	cs5536_write(pdev, ETC, etc);
 }
 
 /**
@@ -208,25 +197,21 @@  static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u32 dtc, etc;
+	u32 etc;
 	int mode = adev->dma_mode;
 	int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
 
-	if (mode >= XFER_UDMA_0) {
-		cs5536_read(pdev, ETC, &etc);
+	cs5536_read(pdev, ETC, &etc);
 
+	if (mode >= XFER_UDMA_0) {
 		etc &= ~(IDE_DRV_MASK << dshift);
 		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
-
-		cs5536_write(pdev, ETC, etc);
 	} else { /* MWDMA */
-		cs5536_read(pdev, DTC, &dtc);
-
-		dtc &= ~(IDE_DRV_MASK << dshift);
-		dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift;
-
-		cs5536_write(pdev, DTC, dtc);
+		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
+		cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]);
 	}
+
+	cs5536_write(pdev, ETC, etc);
 }
 
 static struct scsi_host_template cs5536_sht = {
diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c
index ca9d9ca..c5af97f 100644
--- a/drivers/ata/pata_imx.c
+++ b/drivers/ata/pata_imx.c
@@ -235,17 +235,7 @@  static struct platform_driver pata_imx_driver = {
 	},
 };
 
-static int __init pata_imx_init(void)
-{
-	return platform_driver_register(&pata_imx_driver);
-}
-
-static void __exit pata_imx_exit(void)
-{
-	platform_driver_unregister(&pata_imx_driver);
-}
-module_init(pata_imx_init);
-module_exit(pata_imx_exit);
+module_platform_driver(pata_imx_driver);
 
 MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
 MODULE_DESCRIPTION("low-level driver for iMX PATA");
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 15b6431..badb178 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -205,21 +205,10 @@  static struct platform_driver ixp4xx_pata_platform_driver = {
 	.remove		= __devexit_p(ixp4xx_pata_remove),
 };
 
-static int __init ixp4xx_pata_init(void)
-{
-	return platform_driver_register(&ixp4xx_pata_platform_driver);
-}
-
-static void __exit ixp4xx_pata_exit(void)
-{
-	platform_driver_unregister(&ixp4xx_pata_platform_driver);
-}
+module_platform_driver(ixp4xx_pata_platform_driver);
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
 MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_ALIAS("platform:" DRV_NAME);
-
-module_init(ixp4xx_pata_init);
-module_exit(ixp4xx_pata_exit);
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 3e17463..00748ae 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -897,26 +897,7 @@  static struct platform_driver mpc52xx_ata_of_platform_driver = {
 	},
 };
 
-
-/* ======================================================================== */
-/* Module                                                                   */
-/* ======================================================================== */
-
-static int __init
-mpc52xx_ata_init(void)
-{
-	printk(KERN_INFO "ata: MPC52xx IDE/ATA libata driver\n");
-	return platform_driver_register(&mpc52xx_ata_of_platform_driver);
-}
-
-static void __exit
-mpc52xx_ata_exit(void)
-{
-	platform_driver_unregister(&mpc52xx_ata_of_platform_driver);
-}
-
-module_init(mpc52xx_ata_init);
-module_exit(mpc52xx_ata_exit);
+module_platform_driver(mpc52xx_ata_of_platform_driver);
 
 MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
 MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver");
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index 2a472c5..1654dc2 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -12,8 +12,7 @@ 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 
 static int __devinit pata_of_platform_probe(struct platform_device *ofdev)
@@ -22,7 +21,7 @@  static int __devinit pata_of_platform_probe(struct platform_device *ofdev)
 	struct device_node *dn = ofdev->dev.of_node;
 	struct resource io_res;
 	struct resource ctl_res;
-	struct resource irq_res;
+	struct resource *irq_res;
 	unsigned int reg_shift = 0;
 	int pio_mode = 0;
 	int pio_mask;
@@ -51,11 +50,9 @@  static int __devinit pata_of_platform_probe(struct platform_device *ofdev)
 		}
 	}
 
-	ret = of_irq_to_resource(dn, 0, &irq_res);
-	if (!ret)
-		irq_res.start = irq_res.end = 0;
-	else
-		irq_res.flags = 0;
+	irq_res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
+	if (irq_res)
+		irq_res->flags = 0;
 
 	prop = of_get_property(dn, "reg-shift", NULL);
 	if (prop)
@@ -75,7 +72,7 @@  static int __devinit pata_of_platform_probe(struct platform_device *ofdev)
 	pio_mask = 1 << pio_mode;
 	pio_mask |= (1 << pio_mode) - 1;
 
-	return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, &irq_res,
+	return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, irq_res,
 				     reg_shift, pio_mask);
 }
 
@@ -101,17 +98,7 @@  static struct platform_driver pata_of_platform_driver = {
 	.remove		= __devexit_p(pata_of_platform_remove),
 };
 
-static int __init pata_of_platform_init(void)
-{
-	return platform_driver_register(&pata_of_platform_driver);
-}
-module_init(pata_of_platform_init);
-
-static void __exit pata_of_platform_exit(void)
-{
-	platform_driver_unregister(&pata_of_platform_driver);
-}
-module_exit(pata_of_platform_exit);
+module_platform_driver(pata_of_platform_driver);
 
 MODULE_DESCRIPTION("OF-platform PATA driver");
 MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
index b86d7e2..5ff31b6 100644
--- a/drivers/ata/pata_palmld.c
+++ b/drivers/ata/pata_palmld.c
@@ -132,20 +132,9 @@  static struct platform_driver palmld_pata_platform_driver = {
 	.remove		= __devexit_p(palmld_pata_remove),
 };
 
-static int __init palmld_pata_init(void)
-{
-	return platform_driver_register(&palmld_pata_platform_driver);
-}
-
-static void __exit palmld_pata_exit(void)
-{
-	platform_driver_unregister(&palmld_pata_platform_driver);
-}
+module_platform_driver(palmld_pata_platform_driver);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
 MODULE_DESCRIPTION("PalmLD PATA driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRV_NAME);
-
-module_init(palmld_pata_init);
-module_exit(palmld_pata_exit);
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 2067308..f1848ae 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -256,17 +256,7 @@  static struct platform_driver pata_platform_driver = {
 	},
 };
 
-static int __init pata_platform_init(void)
-{
-	return platform_driver_register(&pata_platform_driver);
-}
-
-static void __exit pata_platform_exit(void)
-{
-	platform_driver_unregister(&pata_platform_driver);
-}
-module_init(pata_platform_init);
-module_exit(pata_platform_exit);
+module_platform_driver(pata_platform_driver);
 
 module_param(pio_mask, int, 0);
 
diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index b4ede40..0bb0fb7 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -390,18 +390,7 @@  static struct platform_driver pxa_ata_driver = {
 	},
 };
 
-static int __init pxa_ata_init(void)
-{
-	return platform_driver_register(&pxa_ata_driver);
-}
-
-static void __exit pxa_ata_exit(void)
-{
-	platform_driver_unregister(&pxa_ata_driver);
-}
-
-module_init(pxa_ata_init);
-module_exit(pxa_ata_exit);
+module_platform_driver(pxa_ata_driver);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
 MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index 1b9d10d..9417101 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -188,9 +188,6 @@  static __devexit int rb532_pata_driver_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:" DRV_NAME);
-
 static struct platform_driver rb532_pata_platform_driver = {
 	.probe		= rb532_pata_driver_probe,
 	.remove		= __devexit_p(rb532_pata_driver_remove),
@@ -200,27 +197,13 @@  static struct platform_driver rb532_pata_platform_driver = {
 	},
 };
 
-/* ------------------------------------------------------------------------ */
-
 #define DRV_INFO DRV_DESC " version " DRV_VERSION
 
-static int __init rb532_pata_module_init(void)
-{
-	printk(KERN_INFO DRV_INFO "\n");
-
-	return platform_driver_register(&rb532_pata_platform_driver);
-}
-
-static void __exit rb532_pata_module_exit(void)
-{
-	platform_driver_unregister(&rb532_pata_platform_driver);
-}
+module_platform_driver(rb532_pata_platform_driver);
 
 MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
 MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
 MODULE_DESCRIPTION(DRV_DESC);
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");
-
-module_init(rb532_pata_module_init);
-module_exit(rb532_pata_module_exit);
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 5c42374..69f7cde 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -1777,18 +1777,7 @@  static struct platform_driver sata_dwc_driver = {
 	.remove = sata_dwc_remove,
 };
 
-static int __init sata_dwc_init(void)
-{
-	return platform_driver_register(&sata_dwc_driver);
-}
-
-static void __exit sata_dwc_exit(void)
-{
-	platform_driver_unregister(&sata_dwc_driver);
-}
-
-module_init(sata_dwc_init);
-module_exit(sata_dwc_exit);
+module_platform_driver(sata_dwc_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 78ae7b6..5a2c95b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1452,21 +1452,9 @@  static struct platform_driver fsl_sata_driver = {
 #endif
 };
 
-static int __init sata_fsl_init(void)
-{
-	platform_driver_register(&fsl_sata_driver);
-	return 0;
-}
-
-static void __exit sata_fsl_exit(void)
-{
-	platform_driver_unregister(&fsl_sata_driver);
-}
+module_platform_driver(fsl_sata_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor");
 MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver");
 MODULE_VERSION("1.10");
-
-module_init(sata_fsl_init);
-module_exit(sata_fsl_exit);
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index dc6131e..5f84a14 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1812,7 +1812,7 @@  int scsi_error_handler(void *data)
 		 * what we need to do to get it up and online again (if we can).
 		 * If we fail, we end up taking the thing offline.
 		 */
-		if (scsi_autopm_get_host(shost) != 0) {
+		if (!shost->eh_noresume && scsi_autopm_get_host(shost) != 0) {
 			SCSI_LOG_ERROR_RECOVERY(1,
 				printk(KERN_ERR "Error handler scsi_eh_%d "
 						"unable to autoresume\n",
@@ -1833,7 +1833,8 @@  int scsi_error_handler(void *data)
 		 * which are still online.
 		 */
 		scsi_restart_operations(shost);
-		scsi_autopm_put_host(shost);
+		if (!shost->eh_noresume)
+			scsi_autopm_put_host(shost);
 		set_current_state(TASK_INTERRUPTIBLE);
 	}
 	__set_current_state(TASK_RUNNING);
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index d329f8b..bf8bf79 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -49,8 +49,22 @@  static int scsi_bus_suspend_common(struct device *dev, pm_message_t msg)
 {
 	int err = 0;
 
-	if (scsi_is_sdev_device(dev))
+	if (scsi_is_sdev_device(dev)) {
+		/*
+		 * sd is the only high-level SCSI driver to implement runtime
+		 * PM, and sd treats runtime suspend, system suspend, and
+		 * system hibernate identically (but not system freeze).
+		 */
+		if (pm_runtime_suspended(dev)) {
+			if (msg.event == PM_EVENT_SUSPEND ||
+			    msg.event == PM_EVENT_HIBERNATE)
+				return 0;	/* already suspended */
+
+			/* wake up device so that FREEZE will succeed */
+			pm_runtime_resume(dev);
+		}
 		err = scsi_dev_type_suspend(dev, msg);
+	}
 	return err;
 }
 
@@ -58,8 +72,17 @@  static int scsi_bus_resume_common(struct device *dev)
 {
 	int err = 0;
 
-	if (scsi_is_sdev_device(dev))
+	if (scsi_is_sdev_device(dev)) {
+		/*
+		 * Parent device may have runtime suspended as soon as
+		 * it is woken up during the system resume.
+		 *
+		 * Resume it on behalf of child.
+		 */
+		pm_runtime_get_sync(dev->parent);
 		err = scsi_dev_type_resume(dev);
+		pm_runtime_put_sync(dev->parent);
+	}
 
 	if (err == 0) {
 		pm_runtime_disable(dev);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index fa3a591..7b3f807 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -50,6 +50,7 @@ 
 #include <linux/string_helpers.h>
 #include <linux/async.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
@@ -2741,6 +2742,9 @@  static void sd_shutdown(struct device *dev)
 	if (!sdkp)
 		return;         /* this can happen */
 
+	if (pm_runtime_suspended(dev))
+		goto exit;
+
 	if (sdkp->WCE) {
 		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
 		sd_sync_cache(sdkp);
@@ -2751,6 +2755,7 @@  static void sd_shutdown(struct device *dev)
 		sd_start_stop_device(sdkp, 0);
 	}
 
+exit:
 	scsi_disk_put(sdkp);
 }
 
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index be3d9a7..73a2500 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -23,6 +23,8 @@  struct ata_port_info;
 struct ahci_platform_data {
 	int (*init)(struct device *dev, void __iomem *addr);
 	void (*exit)(struct device *dev);
+	int (*suspend)(struct device *dev);
+	int (*resume)(struct device *dev);
 	const struct ata_port_info *ata_port_info;
 	unsigned int force_port_map;
 	unsigned int mask_port_map;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 50266c9..5f7d5b3 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -669,6 +669,9 @@  struct Scsi_Host {
 	/* Asynchronous scan in progress */
 	unsigned async_scan:1;
 
+	/* Don't resume host in EH */
+	unsigned eh_noresume:1;
+
 	/*
 	 * Optional work queue to be utilized by the transport
 	 */