Message ID | 20201105051036.3271437-3-blp@ovn.org |
---|---|
State | Superseded |
Headers | show |
Series | Add DDlog implementation of ovn-northd | expand |
On Thu, Nov 5, 2020 at 10:41 AM Ben Pfaff <blp@ovn.org> wrote: > > atlocal.in sets a global default 30-second timeout for all utility > definitions, via OVS_CTL_TIMEOUT=30, so there's no need for individual > shorter timeouts, and they can be harmful in cases where the machine > is running slowly for one reason or another. > > Signed-off-by: Ben Pfaff <blp@ovn.org> Acked-by: Numan Siddique <numans@ovn.org> Numan > --- > tests/ovn-controller-vtep.at | 20 ++++++------- > tests/ovn-sbctl.at | 2 +- > tests/ovn.at | 55 +++++++++++++++++------------------- > 3 files changed, 37 insertions(+), 40 deletions(-) > > diff --git a/tests/ovn-controller-vtep.at b/tests/ovn-controller-vtep.at > index d3895a60f53c..8b4c180b1669 100644 > --- a/tests/ovn-controller-vtep.at > +++ b/tests/ovn-controller-vtep.at > @@ -181,7 +181,7 @@ OVN_CONTROLLER_VTEP_START > AT_CHECK([vtep-ctl add-ls lswitch0 -- bind-ls br-vtep p0 100 lswitch0 -- bind-ls br-vtep p1 300 lswitch0]) > # adds logical switch port in ovn-nb database, and sets the type and options. > OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch0], [br-vtep], [lswitch0]) > -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' > +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' > # should see one binding, associated to chassis of 'br-vtep'. > chassis_uuid=$(ovn-sbctl --columns=_uuid list Chassis br-vtep | cut -d ':' -f2 | tr -d ' ') > AT_CHECK_UNQUOTED([ovn-sbctl --columns=chassis list Port_Binding br-vtep_lswitch0 | cut -d ':' -f2 | tr -d ' '], [0], [dnl > @@ -192,7 +192,7 @@ ${chassis_uuid} > AT_CHECK([vtep-ctl add-ls lswitch1 -- bind-ls br-vtep p0 200 lswitch1]) > # adds logical switch port in ovn-nb database for lswitch1. > OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch1], [br-vtep], [lswitch1]) > -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch1 chassis!='[[]]' > +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch1 chassis!='[[]]' > # This is allowed, but not recommended, to have two vlan_bindings (to different vtep logical switches) > # from one vtep gateway physical port in one ovn-nb logical swithch. > AT_CHECK_UNQUOTED([ovn-sbctl --columns=chassis list Port_Binding | cut -d ':' -f2 | tr -d ' ' | sort], [0], [dnl > @@ -203,7 +203,7 @@ ${chassis_uuid} > > # adds another logical switch port in ovn-nb database for lswitch0. > OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch0_dup], [br-vtep], [lswitch0]) > -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0_dup chassis!='[[]]' > +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0_dup chassis!='[[]]' > # it is not allowed to have more than one ovn-nb logical port for the same > # vtep logical switch on a vtep gateway chassis, so should still see only > # two port_binding entries bound. > @@ -246,7 +246,7 @@ OVN_CONTROLLER_VTEP_START > AT_CHECK([vtep-ctl add-ls lswitch0 -- bind-ls br-vtep p0 100 lswitch0]) > # adds logical switch port in ovn-nb database, and sets the type and options. > OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch0], [br-vtep], [lswitch0]) > -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' > +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' > > # adds another lswitch 'br-void' in ovn-nb database. > AT_CHECK([ovn-nbctl ls-add br-void]) > @@ -255,7 +255,7 @@ AT_CHECK([vtep-ctl add-ps br-vtep-void -- add-port br-vtep-void p0-void -- bind- > # adds a conflicting logical port (both br-vtep_lswitch0 and br-vtep-void_lswitch0 > # are bound to the same logical switch, but they are on different datapath). > OVN_NB_ADD_VTEP_PORT([br-void], [br-vtep-void_lswitch0], [br-vtep-void], [lswitch0]) > -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0 > +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0 > OVS_WAIT_UNTIL([test -n "`grep WARN ovn-controller-vtep.log`"]) > # confirms the warning log. > AT_CHECK([sed -n 's/^.*\(|WARN|.*\)$/\1/p' ovn-controller-vtep.log | sed 's/([[-_0-9a-z]][[-_0-9a-z]]*)/()/g;s/(with tunnel key [[0-9]][[0-9]]*)/()/g' | uniq], [0], [dnl > @@ -337,7 +337,7 @@ OVN_CONTROLLER_VTEP_START > # 'ch0'. > AT_CHECK([ovn-nbctl lsp-add br-test vif0]) > AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02]) > -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) > +AT_CHECK([ovn-nbctl --wait=sb sync]) > AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5]) > AT_CHECK([ovn-sbctl lsp-bind vif0 ch0]) > > @@ -352,7 +352,7 @@ AT_CHECK([ovn-nbctl ls-add br-void]) > # adds fake hv chassis 'ch1'. > AT_CHECK([ovn-nbctl lsp-add br-void vif1]) > AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) > -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) > +AT_CHECK([ovn-nbctl --wait=sb sync]) > AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6]) > AT_CHECK([ovn-sbctl lsp-bind vif1 ch1]) > > @@ -425,14 +425,14 @@ OVN_CONTROLLER_VTEP_START > # 'ch0'. > AT_CHECK([ovn-nbctl lsp-add br-test vif0]) > AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02]) > -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) > +AT_CHECK([ovn-nbctl --wait=sb sync]) > AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5]) > AT_CHECK([ovn-sbctl lsp-bind vif0 ch0]) > > # creates another vif in the same logical switch with duplicate mac. > AT_CHECK([ovn-nbctl lsp-add br-test vif1]) > AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) > -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) > +AT_CHECK([ovn-nbctl --wait=sb sync]) > AT_CHECK([ovn-sbctl lsp-bind vif1 ch0]) > > # creates the logical switch in vtep and adds the corresponding logical > @@ -461,7 +461,7 @@ AT_CHECK([ovn-nbctl ls-add br-void]) > # adds fake hv chassis 'ch1' and vif1 with same mac address as vif0. > AT_CHECK([ovn-nbctl lsp-add br-void vif1]) > AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) > -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) > +AT_CHECK([ovn-nbctl --wait=sb sync]) > AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6]) > AT_CHECK([ovn-sbctl lsp-bind vif1 ch1]) > OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding | grep vif1`"]) > diff --git a/tests/ovn-sbctl.at b/tests/ovn-sbctl.at > index c25d4d3723cf..2712cc15490c 100644 > --- a/tests/ovn-sbctl.at > +++ b/tests/ovn-sbctl.at > @@ -124,7 +124,7 @@ AT_CHECK([ovn-nbctl --wait=sb lsp-add br-test vtep0]) > AT_CHECK([ovn-nbctl lsp-set-type vtep0 vtep]) > AT_CHECK([ovn-nbctl lsp-set-options vtep0 vtep_physical_switch=p0 vtep_logical_switch=l0]) > > -AT_CHECK([ovn-sbctl --timeout=10 wait-until Port_Binding vtep0 options!={}]) > +AT_CHECK([ovn-sbctl wait-until Port_Binding vtep0 options!={}]) > AT_CHECK([ovn-sbctl --columns=logical_port,mac,type,options list Port_Binding vtep0], [0], [dnl > logical_port : vtep0 > mac : [[]] > diff --git a/tests/ovn.at b/tests/ovn.at > index 1c29cdf26292..f154e3d77317 100644 > --- a/tests/ovn.at > +++ b/tests/ovn.at > @@ -6917,7 +6917,7 @@ ovn-nbctl lsp-del lp1 > ovn-nbctl ls-del ls1 > > # wait for earlier changes to take effect > -AT_CHECK([ovn-nbctl --timeout=3 --wait=sb sync], [0], [ignore]) > +check ovn-nbctl --wait=sb sync > > # ensure OF rules are no longer present. There used to be a bug here. > test_datapath_in_of_rules 0 "after lport+ls removal" > @@ -7361,17 +7361,17 @@ ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice type=router > # Create logical port foo1 in foo > ovn-nbctl --wait=sb lsp-add foo foo1 \ > -- lsp-set-addresses foo1 "dynamic" > -AT_CHECK([ovn-nbctl --timeout=10 wait-until Logical-Switch-Port foo1 dynamic_addresses='"0a:00:00:a8:01:03 192.168.1.2"'], [0]) > +check ovn-nbctl wait-until Logical-Switch-Port foo1 dynamic_addresses='"0a:00:00:a8:01:03 192.168.1.2"' > > # Create logical port alice1 in alice > ovn-nbctl --wait=sb lsp-add alice alice1 \ > -- lsp-set-addresses alice1 "dynamic" > -AT_CHECK([ovn-nbctl --timeout=10 wait-until Logical-Switch-Port alice1 dynamic_addresses='"0a:00:00:a8:02:03 192.168.2.2"']) > +check ovn-nbctl wait-until Logical-Switch-Port alice1 dynamic_addresses='"0a:00:00:a8:02:03 192.168.2.2"' > > # Create logical port foo2 in foo > ovn-nbctl --wait=sb lsp-add foo foo2 \ > -- lsp-set-addresses foo2 "dynamic" > -AT_CHECK([ovn-nbctl --timeout=10 wait-until Logical-Switch-Port foo2 dynamic_addresses='"0a:00:00:a8:01:04 192.168.1.3"']) > +check ovn-nbctl wait-until Logical-Switch-Port foo2 dynamic_addresses='"0a:00:00:a8:01:04 192.168.1.3"' > > # Create a hypervisor and create OVS ports corresponding to logical ports. > net_add n1 > @@ -9890,7 +9890,10 @@ as gw1 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys > as gw2 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys > as ext1 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys > > -AT_CHECK([ovn-nbctl --timeout=3 --wait=sb sync], [0], [ignore]) > +check ovn-nbctl --wait=sb sync > + > +ovn-sbctl dump-flows > sbflows > +AT_CAPTURE_FILE([sbflows]) > > # hv1 should be in 'ref_chassis' of the ha_chasssi_group as logical > # switch 'foo' can reach the router 'R1' (which has gw router port) > @@ -9974,7 +9977,7 @@ grep actions=mod_dl_dst:f0:00:00:01:02:04 | wc -l` -eq 1 > > test_ip_packet gw1 gw2 > > -ovn-nbctl --timeout=3 --wait=hv \ > +ovn-nbctl --wait=hv \ > --id=@gc0 create Gateway_Chassis name=alice_gw1 \ > chassis_name=gw1 \ > priority=10 -- \ > @@ -10316,7 +10319,7 @@ OVN_CHECK_PACKETS([hv2/vif1-tx.pcap], [hv2-vif1.expected]) > > check_row_count Port_Binding 1 logical_port=cr-alice > > -ovn-nbctl --timeout=3 --wait=sb lrp-del-gateway-chassis alice hv2 > +check ovn-nbctl --wait=sb lrp-del-gateway-chassis alice hv2 > > check_row_count Port_Binding 0 logical_port=cr-alice > > @@ -10604,8 +10607,7 @@ ovn-nbctl lsp-set-type ln-outside localnet > ovn-nbctl lsp-set-options ln-outside network_name=phys > > # Allow some time for ovn-northd and ovn-controller to catch up. > -# XXX This should be more systematic. > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > # Check that there is a logical flow in logical switch foo's pipeline > # to set the outport to rp-foo (which is expected). > @@ -11310,8 +11312,7 @@ ovn-nbctl lsp-set-type ln-outside localnet > ovn-nbctl lsp-set-options ln-outside network_name=phys > > # Allow some time for ovn-northd and ovn-controller to catch up. > -# XXX This should be more systematic. > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > echo "---------NB dump-----" > ovn-nbctl show > @@ -11434,8 +11435,7 @@ ovn-nbctl --id=@gc0 create Gateway_Chassis \ > set Logical_Router_Port outside 'gateway_chassis=[@gc0,@gc1]' > > > -# XXX: Let the change propagate down to the ovn-controllers > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > # we make sure that the hypervisors noticed, and inverted the slave ports > OVS_WAIT_UNTIL([as hv1 ovs-ofctl dump-flows br-int table=32 | \ > @@ -11800,7 +11800,7 @@ AT_CHECK([ovn-nbctl lsp-set-type ln_port localnet]) > AT_CHECK([ovn-nbctl lsp-set-options ln_port network_name=physnet1]) > > # wait for earlier changes to take effect > -AT_CHECK([ovn-nbctl --timeout=3 --wait=hv sync], [0], [ignore]) > +check ovn-nbctl --wait=hv sync > > reset_pcap_file() { > local iface=$1 > @@ -12000,7 +12000,7 @@ ovn-nbctl lsp-set-type ln-outside localnet > ovn-nbctl lsp-set-options ln-outside network_name=phys > > # Allow some time for ovn-northd and ovn-controller to catch up. > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > # currently when ovn-controller is restarted, the old entry is deleted > # and a new one is created, which leaves the Gateway_Chassis with > @@ -12279,7 +12279,7 @@ set Interface hv2-vif0 ofport-request=1 > ovn-nbctl lsp-set-options lsp0 requested-chassis=hv1 > > # Allow some time for ovn-northd and ovn-controller to catch up. > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > # Retrieve hv1 and hv2 chassis UUIDs from southbound database > wait_row_count Chassis 1 name=hv1 > @@ -12348,7 +12348,7 @@ ovs-vsctl -- add-port br-int hv1-vif0 -- set Interface hv1-vif0 ofport-request=1 > wait_row_count Chassis 1 name=hv1 > hv1_hostname=$(fetch Chassis hostname name=hv1) > echo "hv1_hostname=${hv1_hostname}" > -ovn-nbctl --wait=hv --timeout=3 lsp-set-options lsp0 requested-chassis=${hv1_hostname} > +check ovn-nbctl --wait=hv lsp-set-options lsp0 requested-chassis=${hv1_hostname} > as hv1 ovs-vsctl set interface hv1-vif0 external-ids:iface-id=lsp0 > > hv1_uuid=$(fetch_column Chassis _uuid name=hv1) > @@ -12358,9 +12358,9 @@ wait_column "$hv1_uuid" Port_Binding chassis logical_port=lsp0 > AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=0 | grep in_port=1], [0], [ignore]) > AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=65 | grep actions=output:1], [0], [ignore]) > > -ovn-nbctl --wait=hv --timeout=3 lsp-set-options lsp0 requested-chassis=non-existant-chassis > +check ovn-nbctl --wait=hv lsp-set-options lsp0 requested-chassis=non-existant-chassis > OVS_WAIT_UNTIL([test 1 = $(grep -c "Releasing lport lsp0 from this chassis" hv1/ovn-controller.log)]) > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > wait_column '' Port_Binding chasssi logical_port=lsp0 > AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=0 | grep in_port=1], [1], []) > AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=65 | grep output], [1], []) > @@ -15772,8 +15772,7 @@ for i in 1 2 3 4 5; do > done > > dnl Wait for the changes to be propagated > -ovn-nbctl --wait=sb --timeout=3 sync > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > dnl Assert that each Chassis has a tunnel formed to every other Chassis > as hv1 > @@ -15840,8 +15839,7 @@ as hv3 > ovs-vsctl set open . external-ids:ovn-transport-zones=tz2 > > dnl Wait for the changes to be propagated > -ovn-nbctl --wait=sb --timeout=3 sync > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > as hv1 > AT_CHECK([ovs-vsctl --bare --columns=name find interface type="geneve" | awk NF | sort], [0], > @@ -15877,8 +15875,7 @@ for i in 1 2 3; do > done > > dnl Wait for the changes to be propagated > -ovn-nbctl --wait=sb --timeout=3 sync > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > as hv1 > AT_CHECK([ovs-vsctl --bare --columns=name find interface type="geneve" | awk NF | sort], [0], > @@ -16553,7 +16550,7 @@ uuid_lb2=$(ovn-nbctl --bare --columns=_uuid find load_balancer name=lb2) > ovn-nbctl --wait=hv meter-add event-elb drop 100 pktps 10 > > OVN_POPULATE_ARP > -ovn-nbctl --timeout=3 --wait=hv sync > +check ovn-nbctl --wait=hv sync > ovn-sbctl lflow-list > sbflows > AT_CAPTURE_FILE([sbflows]) > as hv1 ovs-ofctl dump-flows br-int > offlows > @@ -19943,7 +19940,7 @@ ovn-nbctl lsp-add lsw0 lp1 > ovn-nbctl lsp-set-addresses lp1 "f0:00:00:00:00:01 10.0.0.1" > ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1234' drop > > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > # Trace with --ovs should see ovs flow related to the ACL > AT_CHECK([ovn-trace --ovs lsw0 'inport == "lp1" && eth.type == 0x1234' | grep "dl_type=0x1234" | grep "cookie"], [0], [ignore]) > @@ -19952,7 +19949,7 @@ AT_CHECK([ovn-trace --ovs lsw0 'inport == "lp1" && eth.type == 0x1234' | grep "d > ovn-nbctl acl-del lsw0 -- \ > acl-add lsw0 from-lport 1000 'eth.type == 0x1234' allow > > -ovn-nbctl --wait=hv --timeout=3 sync > +check ovn-nbctl --wait=hv sync > > # Trace with --ovs should still see the ovs flow related to the ACL, which > # means the OVS flow is updated with new cookie corresponding to the new lflow. > @@ -20211,7 +20208,7 @@ ovs-vsctl -- add-port br-int hv1-vif3 -- \ > ofport-request=3 > > # wait for earlier changes to take effect > -AT_CHECK([ovn-nbctl --timeout=3 --wait=hv sync], [0], [ignore]) > +check ovn-nbctl --wait=hv sync > > ovn-sbctl dump-flows > sbflows > AT_CAPTURE_FILE([sbflows]) > -- > 2.26.2 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev >
diff --git a/tests/ovn-controller-vtep.at b/tests/ovn-controller-vtep.at index d3895a60f53c..8b4c180b1669 100644 --- a/tests/ovn-controller-vtep.at +++ b/tests/ovn-controller-vtep.at @@ -181,7 +181,7 @@ OVN_CONTROLLER_VTEP_START AT_CHECK([vtep-ctl add-ls lswitch0 -- bind-ls br-vtep p0 100 lswitch0 -- bind-ls br-vtep p1 300 lswitch0]) # adds logical switch port in ovn-nb database, and sets the type and options. OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch0], [br-vtep], [lswitch0]) -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' # should see one binding, associated to chassis of 'br-vtep'. chassis_uuid=$(ovn-sbctl --columns=_uuid list Chassis br-vtep | cut -d ':' -f2 | tr -d ' ') AT_CHECK_UNQUOTED([ovn-sbctl --columns=chassis list Port_Binding br-vtep_lswitch0 | cut -d ':' -f2 | tr -d ' '], [0], [dnl @@ -192,7 +192,7 @@ ${chassis_uuid} AT_CHECK([vtep-ctl add-ls lswitch1 -- bind-ls br-vtep p0 200 lswitch1]) # adds logical switch port in ovn-nb database for lswitch1. OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch1], [br-vtep], [lswitch1]) -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch1 chassis!='[[]]' +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch1 chassis!='[[]]' # This is allowed, but not recommended, to have two vlan_bindings (to different vtep logical switches) # from one vtep gateway physical port in one ovn-nb logical swithch. AT_CHECK_UNQUOTED([ovn-sbctl --columns=chassis list Port_Binding | cut -d ':' -f2 | tr -d ' ' | sort], [0], [dnl @@ -203,7 +203,7 @@ ${chassis_uuid} # adds another logical switch port in ovn-nb database for lswitch0. OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch0_dup], [br-vtep], [lswitch0]) -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0_dup chassis!='[[]]' +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0_dup chassis!='[[]]' # it is not allowed to have more than one ovn-nb logical port for the same # vtep logical switch on a vtep gateway chassis, so should still see only # two port_binding entries bound. @@ -246,7 +246,7 @@ OVN_CONTROLLER_VTEP_START AT_CHECK([vtep-ctl add-ls lswitch0 -- bind-ls br-vtep p0 100 lswitch0]) # adds logical switch port in ovn-nb database, and sets the type and options. OVN_NB_ADD_VTEP_PORT([br-test], [br-vtep_lswitch0], [br-vtep], [lswitch0]) -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0 chassis!='[[]]' # adds another lswitch 'br-void' in ovn-nb database. AT_CHECK([ovn-nbctl ls-add br-void]) @@ -255,7 +255,7 @@ AT_CHECK([vtep-ctl add-ps br-vtep-void -- add-port br-vtep-void p0-void -- bind- # adds a conflicting logical port (both br-vtep_lswitch0 and br-vtep-void_lswitch0 # are bound to the same logical switch, but they are on different datapath). OVN_NB_ADD_VTEP_PORT([br-void], [br-vtep-void_lswitch0], [br-vtep-void], [lswitch0]) -ovn-sbctl --timeout=10 wait-until Port_Binding br-vtep_lswitch0 +check ovn-sbctl wait-until Port_Binding br-vtep_lswitch0 OVS_WAIT_UNTIL([test -n "`grep WARN ovn-controller-vtep.log`"]) # confirms the warning log. AT_CHECK([sed -n 's/^.*\(|WARN|.*\)$/\1/p' ovn-controller-vtep.log | sed 's/([[-_0-9a-z]][[-_0-9a-z]]*)/()/g;s/(with tunnel key [[0-9]][[0-9]]*)/()/g' | uniq], [0], [dnl @@ -337,7 +337,7 @@ OVN_CONTROLLER_VTEP_START # 'ch0'. AT_CHECK([ovn-nbctl lsp-add br-test vif0]) AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02]) -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) +AT_CHECK([ovn-nbctl --wait=sb sync]) AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5]) AT_CHECK([ovn-sbctl lsp-bind vif0 ch0]) @@ -352,7 +352,7 @@ AT_CHECK([ovn-nbctl ls-add br-void]) # adds fake hv chassis 'ch1'. AT_CHECK([ovn-nbctl lsp-add br-void vif1]) AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) +AT_CHECK([ovn-nbctl --wait=sb sync]) AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6]) AT_CHECK([ovn-sbctl lsp-bind vif1 ch1]) @@ -425,14 +425,14 @@ OVN_CONTROLLER_VTEP_START # 'ch0'. AT_CHECK([ovn-nbctl lsp-add br-test vif0]) AT_CHECK([ovn-nbctl lsp-set-addresses vif0 f0:ab:cd:ef:01:02]) -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) +AT_CHECK([ovn-nbctl --wait=sb sync]) AT_CHECK([ovn-sbctl chassis-add ch0 vxlan 1.2.3.5]) AT_CHECK([ovn-sbctl lsp-bind vif0 ch0]) # creates another vif in the same logical switch with duplicate mac. AT_CHECK([ovn-nbctl lsp-add br-test vif1]) AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) +AT_CHECK([ovn-nbctl --wait=sb sync]) AT_CHECK([ovn-sbctl lsp-bind vif1 ch0]) # creates the logical switch in vtep and adds the corresponding logical @@ -461,7 +461,7 @@ AT_CHECK([ovn-nbctl ls-add br-void]) # adds fake hv chassis 'ch1' and vif1 with same mac address as vif0. AT_CHECK([ovn-nbctl lsp-add br-void vif1]) AT_CHECK([ovn-nbctl lsp-set-addresses vif1 f0:ab:cd:ef:01:02]) -AT_CHECK([ovn-nbctl --timeout=10 --wait=sb sync]) +AT_CHECK([ovn-nbctl --wait=sb sync]) AT_CHECK([ovn-sbctl chassis-add ch1 vxlan 1.2.3.6]) AT_CHECK([ovn-sbctl lsp-bind vif1 ch1]) OVS_WAIT_UNTIL([test -n "`ovn-sbctl list Port_Binding | grep vif1`"]) diff --git a/tests/ovn-sbctl.at b/tests/ovn-sbctl.at index c25d4d3723cf..2712cc15490c 100644 --- a/tests/ovn-sbctl.at +++ b/tests/ovn-sbctl.at @@ -124,7 +124,7 @@ AT_CHECK([ovn-nbctl --wait=sb lsp-add br-test vtep0]) AT_CHECK([ovn-nbctl lsp-set-type vtep0 vtep]) AT_CHECK([ovn-nbctl lsp-set-options vtep0 vtep_physical_switch=p0 vtep_logical_switch=l0]) -AT_CHECK([ovn-sbctl --timeout=10 wait-until Port_Binding vtep0 options!={}]) +AT_CHECK([ovn-sbctl wait-until Port_Binding vtep0 options!={}]) AT_CHECK([ovn-sbctl --columns=logical_port,mac,type,options list Port_Binding vtep0], [0], [dnl logical_port : vtep0 mac : [[]] diff --git a/tests/ovn.at b/tests/ovn.at index 1c29cdf26292..f154e3d77317 100644 --- a/tests/ovn.at +++ b/tests/ovn.at @@ -6917,7 +6917,7 @@ ovn-nbctl lsp-del lp1 ovn-nbctl ls-del ls1 # wait for earlier changes to take effect -AT_CHECK([ovn-nbctl --timeout=3 --wait=sb sync], [0], [ignore]) +check ovn-nbctl --wait=sb sync # ensure OF rules are no longer present. There used to be a bug here. test_datapath_in_of_rules 0 "after lport+ls removal" @@ -7361,17 +7361,17 @@ ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice type=router # Create logical port foo1 in foo ovn-nbctl --wait=sb lsp-add foo foo1 \ -- lsp-set-addresses foo1 "dynamic" -AT_CHECK([ovn-nbctl --timeout=10 wait-until Logical-Switch-Port foo1 dynamic_addresses='"0a:00:00:a8:01:03 192.168.1.2"'], [0]) +check ovn-nbctl wait-until Logical-Switch-Port foo1 dynamic_addresses='"0a:00:00:a8:01:03 192.168.1.2"' # Create logical port alice1 in alice ovn-nbctl --wait=sb lsp-add alice alice1 \ -- lsp-set-addresses alice1 "dynamic" -AT_CHECK([ovn-nbctl --timeout=10 wait-until Logical-Switch-Port alice1 dynamic_addresses='"0a:00:00:a8:02:03 192.168.2.2"']) +check ovn-nbctl wait-until Logical-Switch-Port alice1 dynamic_addresses='"0a:00:00:a8:02:03 192.168.2.2"' # Create logical port foo2 in foo ovn-nbctl --wait=sb lsp-add foo foo2 \ -- lsp-set-addresses foo2 "dynamic" -AT_CHECK([ovn-nbctl --timeout=10 wait-until Logical-Switch-Port foo2 dynamic_addresses='"0a:00:00:a8:01:04 192.168.1.3"']) +check ovn-nbctl wait-until Logical-Switch-Port foo2 dynamic_addresses='"0a:00:00:a8:01:04 192.168.1.3"' # Create a hypervisor and create OVS ports corresponding to logical ports. net_add n1 @@ -9890,7 +9890,10 @@ as gw1 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys as gw2 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys as ext1 ovs-vsctl set open . external-ids:ovn-bridge-mappings=phys:br-phys -AT_CHECK([ovn-nbctl --timeout=3 --wait=sb sync], [0], [ignore]) +check ovn-nbctl --wait=sb sync + +ovn-sbctl dump-flows > sbflows +AT_CAPTURE_FILE([sbflows]) # hv1 should be in 'ref_chassis' of the ha_chasssi_group as logical # switch 'foo' can reach the router 'R1' (which has gw router port) @@ -9974,7 +9977,7 @@ grep actions=mod_dl_dst:f0:00:00:01:02:04 | wc -l` -eq 1 test_ip_packet gw1 gw2 -ovn-nbctl --timeout=3 --wait=hv \ +ovn-nbctl --wait=hv \ --id=@gc0 create Gateway_Chassis name=alice_gw1 \ chassis_name=gw1 \ priority=10 -- \ @@ -10316,7 +10319,7 @@ OVN_CHECK_PACKETS([hv2/vif1-tx.pcap], [hv2-vif1.expected]) check_row_count Port_Binding 1 logical_port=cr-alice -ovn-nbctl --timeout=3 --wait=sb lrp-del-gateway-chassis alice hv2 +check ovn-nbctl --wait=sb lrp-del-gateway-chassis alice hv2 check_row_count Port_Binding 0 logical_port=cr-alice @@ -10604,8 +10607,7 @@ ovn-nbctl lsp-set-type ln-outside localnet ovn-nbctl lsp-set-options ln-outside network_name=phys # Allow some time for ovn-northd and ovn-controller to catch up. -# XXX This should be more systematic. -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync # Check that there is a logical flow in logical switch foo's pipeline # to set the outport to rp-foo (which is expected). @@ -11310,8 +11312,7 @@ ovn-nbctl lsp-set-type ln-outside localnet ovn-nbctl lsp-set-options ln-outside network_name=phys # Allow some time for ovn-northd and ovn-controller to catch up. -# XXX This should be more systematic. -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync echo "---------NB dump-----" ovn-nbctl show @@ -11434,8 +11435,7 @@ ovn-nbctl --id=@gc0 create Gateway_Chassis \ set Logical_Router_Port outside 'gateway_chassis=[@gc0,@gc1]' -# XXX: Let the change propagate down to the ovn-controllers -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync # we make sure that the hypervisors noticed, and inverted the slave ports OVS_WAIT_UNTIL([as hv1 ovs-ofctl dump-flows br-int table=32 | \ @@ -11800,7 +11800,7 @@ AT_CHECK([ovn-nbctl lsp-set-type ln_port localnet]) AT_CHECK([ovn-nbctl lsp-set-options ln_port network_name=physnet1]) # wait for earlier changes to take effect -AT_CHECK([ovn-nbctl --timeout=3 --wait=hv sync], [0], [ignore]) +check ovn-nbctl --wait=hv sync reset_pcap_file() { local iface=$1 @@ -12000,7 +12000,7 @@ ovn-nbctl lsp-set-type ln-outside localnet ovn-nbctl lsp-set-options ln-outside network_name=phys # Allow some time for ovn-northd and ovn-controller to catch up. -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync # currently when ovn-controller is restarted, the old entry is deleted # and a new one is created, which leaves the Gateway_Chassis with @@ -12279,7 +12279,7 @@ set Interface hv2-vif0 ofport-request=1 ovn-nbctl lsp-set-options lsp0 requested-chassis=hv1 # Allow some time for ovn-northd and ovn-controller to catch up. -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync # Retrieve hv1 and hv2 chassis UUIDs from southbound database wait_row_count Chassis 1 name=hv1 @@ -12348,7 +12348,7 @@ ovs-vsctl -- add-port br-int hv1-vif0 -- set Interface hv1-vif0 ofport-request=1 wait_row_count Chassis 1 name=hv1 hv1_hostname=$(fetch Chassis hostname name=hv1) echo "hv1_hostname=${hv1_hostname}" -ovn-nbctl --wait=hv --timeout=3 lsp-set-options lsp0 requested-chassis=${hv1_hostname} +check ovn-nbctl --wait=hv lsp-set-options lsp0 requested-chassis=${hv1_hostname} as hv1 ovs-vsctl set interface hv1-vif0 external-ids:iface-id=lsp0 hv1_uuid=$(fetch_column Chassis _uuid name=hv1) @@ -12358,9 +12358,9 @@ wait_column "$hv1_uuid" Port_Binding chassis logical_port=lsp0 AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=0 | grep in_port=1], [0], [ignore]) AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=65 | grep actions=output:1], [0], [ignore]) -ovn-nbctl --wait=hv --timeout=3 lsp-set-options lsp0 requested-chassis=non-existant-chassis +check ovn-nbctl --wait=hv lsp-set-options lsp0 requested-chassis=non-existant-chassis OVS_WAIT_UNTIL([test 1 = $(grep -c "Releasing lport lsp0 from this chassis" hv1/ovn-controller.log)]) -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync wait_column '' Port_Binding chasssi logical_port=lsp0 AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=0 | grep in_port=1], [1], []) AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=65 | grep output], [1], []) @@ -15772,8 +15772,7 @@ for i in 1 2 3 4 5; do done dnl Wait for the changes to be propagated -ovn-nbctl --wait=sb --timeout=3 sync -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync dnl Assert that each Chassis has a tunnel formed to every other Chassis as hv1 @@ -15840,8 +15839,7 @@ as hv3 ovs-vsctl set open . external-ids:ovn-transport-zones=tz2 dnl Wait for the changes to be propagated -ovn-nbctl --wait=sb --timeout=3 sync -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync as hv1 AT_CHECK([ovs-vsctl --bare --columns=name find interface type="geneve" | awk NF | sort], [0], @@ -15877,8 +15875,7 @@ for i in 1 2 3; do done dnl Wait for the changes to be propagated -ovn-nbctl --wait=sb --timeout=3 sync -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync as hv1 AT_CHECK([ovs-vsctl --bare --columns=name find interface type="geneve" | awk NF | sort], [0], @@ -16553,7 +16550,7 @@ uuid_lb2=$(ovn-nbctl --bare --columns=_uuid find load_balancer name=lb2) ovn-nbctl --wait=hv meter-add event-elb drop 100 pktps 10 OVN_POPULATE_ARP -ovn-nbctl --timeout=3 --wait=hv sync +check ovn-nbctl --wait=hv sync ovn-sbctl lflow-list > sbflows AT_CAPTURE_FILE([sbflows]) as hv1 ovs-ofctl dump-flows br-int > offlows @@ -19943,7 +19940,7 @@ ovn-nbctl lsp-add lsw0 lp1 ovn-nbctl lsp-set-addresses lp1 "f0:00:00:00:00:01 10.0.0.1" ovn-nbctl acl-add lsw0 from-lport 1000 'eth.type == 0x1234' drop -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync # Trace with --ovs should see ovs flow related to the ACL AT_CHECK([ovn-trace --ovs lsw0 'inport == "lp1" && eth.type == 0x1234' | grep "dl_type=0x1234" | grep "cookie"], [0], [ignore]) @@ -19952,7 +19949,7 @@ AT_CHECK([ovn-trace --ovs lsw0 'inport == "lp1" && eth.type == 0x1234' | grep "d ovn-nbctl acl-del lsw0 -- \ acl-add lsw0 from-lport 1000 'eth.type == 0x1234' allow -ovn-nbctl --wait=hv --timeout=3 sync +check ovn-nbctl --wait=hv sync # Trace with --ovs should still see the ovs flow related to the ACL, which # means the OVS flow is updated with new cookie corresponding to the new lflow. @@ -20211,7 +20208,7 @@ ovs-vsctl -- add-port br-int hv1-vif3 -- \ ofport-request=3 # wait for earlier changes to take effect -AT_CHECK([ovn-nbctl --timeout=3 --wait=hv sync], [0], [ignore]) +check ovn-nbctl --wait=hv sync ovn-sbctl dump-flows > sbflows AT_CAPTURE_FILE([sbflows])
atlocal.in sets a global default 30-second timeout for all utility definitions, via OVS_CTL_TIMEOUT=30, so there's no need for individual shorter timeouts, and they can be harmful in cases where the machine is running slowly for one reason or another. Signed-off-by: Ben Pfaff <blp@ovn.org> --- tests/ovn-controller-vtep.at | 20 ++++++------- tests/ovn-sbctl.at | 2 +- tests/ovn.at | 55 +++++++++++++++++------------------- 3 files changed, 37 insertions(+), 40 deletions(-)