| Message ID | 20200920180943.352526-2-pbarker@konsulko.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [1/1] dt-bindings: hwmon: pwm-fan: Support multiple fan tachometer inputs | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
On Sun, 20 Sep 2020 19:09:40 +0100, Paul Barker wrote: > Document and give an example of how to define multiple fan tachometer > inputs for the pwm-fan driver. > > Signed-off-by: Paul Barker <pbarker@konsulko.com> > --- > .../devicetree/bindings/hwmon/pwm-fan.txt | 28 +++++++++++++------ > 1 file changed, 19 insertions(+), 9 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On Sun, Sep 20, 2020 at 07:09:40PM +0100, Paul Barker wrote: > Document and give an example of how to define multiple fan tachometer > inputs for the pwm-fan driver. > > Signed-off-by: Paul Barker <pbarker@konsulko.com> > Reviewed-by: Rob Herring <robh@kernel.org> Applied. Thanks, Guenter > --- > .../devicetree/bindings/hwmon/pwm-fan.txt | 28 +++++++++++++------ > 1 file changed, 19 insertions(+), 9 deletions(-) > > diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt > index 41b76762953a..4509e688623a 100644 > --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt > +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt > @@ -8,15 +8,16 @@ Required properties: > > Optional properties: > - fan-supply : phandle to the regulator that provides power to the fan > -- interrupts : This contains a single interrupt specifier which > - describes the tachometer output of the fan as an > - interrupt source. The output signal must generate a > - defined number of interrupts per fan revolution, which > - require that it must be self resetting edge interrupts. > - See interrupt-controller/interrupts.txt for the format. > -- pulses-per-revolution : define the tachometer pulses per fan revolution as > - an integer (default is 2 interrupts per revolution). > - The value must be greater than zero. > +- interrupts : This contains an interrupt specifier for each fan > + tachometer output connected to an interrupt source. > + The output signal must generate a defined number of > + interrupts per fan revolution, which require that > + it must be self resetting edge interrupts. See > + interrupt-controller/interrupts.txt for the format. > +- pulses-per-revolution : define the number of pulses per fan revolution for > + each tachometer input as an integer (default is 2 > + interrupts per revolution). The value must be > + greater than zero. > > Example: > fan0: pwm-fan { > @@ -55,3 +56,12 @@ Example 2: > interrupts = <1 IRQ_TYPE_EDGE_FALLING>; > pulses-per-revolution = <2>; > }; > + > +Example 3: > + fan0: pwm-fan { > + compatible = "pwm-fan"; > + pwms = <&pwm1 0 25000 0>; > + interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>, > + <&gpio2 5 IRQ_TYPE_EDGE_FALLING>; > + pulses-per-revolution = <2>, <1>; > + };
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 41b76762953a..4509e688623a 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -8,15 +8,16 @@ Required properties: Optional properties: - fan-supply : phandle to the regulator that provides power to the fan -- interrupts : This contains a single interrupt specifier which - describes the tachometer output of the fan as an - interrupt source. The output signal must generate a - defined number of interrupts per fan revolution, which - require that it must be self resetting edge interrupts. - See interrupt-controller/interrupts.txt for the format. -- pulses-per-revolution : define the tachometer pulses per fan revolution as - an integer (default is 2 interrupts per revolution). - The value must be greater than zero. +- interrupts : This contains an interrupt specifier for each fan + tachometer output connected to an interrupt source. + The output signal must generate a defined number of + interrupts per fan revolution, which require that + it must be self resetting edge interrupts. See + interrupt-controller/interrupts.txt for the format. +- pulses-per-revolution : define the number of pulses per fan revolution for + each tachometer input as an integer (default is 2 + interrupts per revolution). The value must be + greater than zero. Example: fan0: pwm-fan { @@ -55,3 +56,12 @@ Example 2: interrupts = <1 IRQ_TYPE_EDGE_FALLING>; pulses-per-revolution = <2>; }; + +Example 3: + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm1 0 25000 0>; + interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>, + <&gpio2 5 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>, <1>; + };
Document and give an example of how to define multiple fan tachometer inputs for the pwm-fan driver. Signed-off-by: Paul Barker <pbarker@konsulko.com> --- .../devicetree/bindings/hwmon/pwm-fan.txt | 28 +++++++++++++------ 1 file changed, 19 insertions(+), 9 deletions(-)